ASTM A 266/A 266M-03a, Specification for Carbon Steel Forgings for Pressure Vessel Components (R)

ASTM A 336/A 336M-03a, Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts (R)

ASTM A 508/A 508M-03a, Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels (R)

ASTM A 675/A 675M-03, Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties (R)

ASTM A 716-03, Specification for Ductile Iron Culvert Pipe (R)

ASTM A 876/A 876M-03, Specification for Flat-rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types (R)

ASTM A 889-03 (Includes change to title), Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame (R)

ASTM A 893/A 893M-03 (Includes change to title), Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies (R)

ASTM A 976-03 (Includes change to title), Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application (R)

ASTM B 676-03, Specification for UNS N08367 Welded Tube (R)

ASTM B 704-03, Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes (R)

ASTM B 705-03, Specification for Nickel-Alloy UNS N06625, N06219 and N08825 Welded Pipe (R)

ASTM B 88M-03, Specification for Seamless Copper Water Tube Metric B 196/B 196M-03, Specification for Copper-Beryllium Alloy Rod and Bar (R)

ASTM B 280-03, Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service (R)

ASTM B 466/B 466M-03, Specification for Seamless Copper-Nickel Pipe and Tube (R)

ASTM B 694-03 (Includes change to title), Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB) , Copper-Clad Stainless Steel (CCS) , and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding (R)

ASTM B 211M-03, Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire Metric (R)

ASTM B 548-03, Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels (R)

ASTM B 338-03, Specification for Seamless and Welded Titanium and Titanium Alloy Tubes (R)

ASTM B 348-03, Specification for Titanium and Titanium Alloy (R)

ASTM B 363-03a, Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings (R)

ASTM B 381-03, Specification for Titanium and Titanium Alloy Forgings B 386-03, Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil (R)

ASTM B 861-03, Specification for Titanium and Titanium Alloy Seamless Pipe (R)

ASTM B 863-03, Specification for Titanium and Titanium Alloy Wire (R)

ASTM C 359-03a, Test Method for Early Stiffening of Hydraulic Cement Mortar Method (R)

ASTM C 1157-03, Performance Specification for Hydraulic Cement (R)

ASTM C 1222-03, Practice for Evaluation of Laboratories Testing Hydraulic Cement (R)

ASTM C 16-03, Test Method for Load Testing Refractory Shapes at High Temperatures (R)

ASTM C 588/C 588M-03, Specification for Gypsum Base for Veneer Plasters (R)

ASTM C 630/C 630M-03, Specification for Water-Resistant Gypsum Backing Board (R)

ASTM C 1278/C 1278M-03, Specification for Fiber-Reinforced Gypsum Panel (R)

ASTM C 11-03d, Terminology Relating to Gypsum and Related Building Materials and Systems (R)

ASTM C 1396/C 1396M-03a, Specification for Gypsum Board (R)

ASTM C 1532-03, Guide for Selection, Removal, and Shipment of Masonry Assemblage Specimens from Existing Construction (R)

ASTM E 514-03, Test Method for Water Penetration and Leakage Through Masonry (R)

ASTM C 1055-03, Guide for Heated System Surface Conditions That Produce Contact Burn Injuries (R)

ASTM C 1126-03, Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation (R)

ASTM C 533-03, Specification for Calcium Silicate Block and Pipe Thermal Insulation (R)

ASTM C 552-03, Specification for Cellular Glass Thermal Insulation (R)

ASTM C 991-03, Specification for Flexible Fibrous Glass Insulation for Metal Buildings (R)

ASTM C 1136-03a, Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation (R)

ASTM C 689-03a, Test Method for Modulus of Rupture of Unfired Clays (R)

ASTM C 690-03, Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique (R)

ASTM D 3957-03, Practices for Establishing Stress Grades for Structural Members Used in Log Buildings (R)

ASTM D 2132-03, Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials (R)

ASTM D 669-03, Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials (R)

ASTM D 1825-03, Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing (R)

ASTM D 2802-03, Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation (R)

ASTM D 3251-03, Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-insulated Magnet Wire (R)

ASTM D 4313-03, Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Cm Jackets for Wire and Cable (R)

ASTM D 4733-03, Test Methods for Solventless Electrical Insulating Varnishes (R)

ASTM D 4880-03, Test Method for Salt Water Proofness of Insulating Varnishes over Enamelled Magnet Wire (R)

ASTM D 6053-03, Test Method for Determination of Volatile Organic Compound VOC Content of Electrical Insulating Varnishes (R)

ASTM D 6194-03, Test Method for Glow-Wire Ignition of Materials (R)

ASTM D 3874-03, Test Method for Ignition of Materials by Hot Wire Sources (R)

ASTM D 4649-03, Guide for Selection and Use of Stretch Wrap Films (R)

ASTM D 5168-03, Practice for Fabrication and Closure of Triple-wall Corrugated Fiberboard Containers (R)

ASTM D 5265-03, Test Method for Bridge Impact Testing (R)

ASTM D 5331-03, Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films (R)

ASTM D 3568-03, Test Methods for Rubber — Evaluation of EPDM Ethylene Propylene Diene Terpolymers Including Mixtures with Oil (R)

ASTM D 3848-03, Test Methods for Rubber — Evaluation of Nbr Acrylonitrile-Butadiene Copolymers Mixed with Carbon Black (R)

ASTM D 5900-03, Specification for Physical and Chemical Properties of Industry Reference Materials IRM (R)

ASTM D 1417-03a, Test Methods for Rubber Latices — Synthetic (R)

ASTM D 3566-03, Practice for Rubber —Determination of Bromine in the Presence of Chlorine by Oxygen Combustion (R)

ASTM D 2000-03, Classification System for Rubber Products in Automotive Applications (R)

ASTM D 928-03, Specification for Sodium Bicarbonate

ASTM D 2050-03, Terminology Relating to Zippers (R)

ASTM D 3775-03a, Test Method for Warp End Count and Filling Pick Count of Woven Fabric (R)

ASTM D 4850-03a, Terminology Relating to Fabric (R)

ASTM D 5822-03, Test Method for Determining Seam Strength in Inflatable Restraint Cushions (R)

ASTM D 3936-03, Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering (R)

ASTM D 5427-03, Practice for Accelerated Aging of Inflatable Restraint Fabrics (R)

ASTM D 3939-03, Test Method for Snagging Resistance of Fabrics Mace (R)

ASTM D 5434-03, Guide for Field Logging of Subsurface Explorations of Soil and Rock (R)

ASTM D 2850-03a, Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils (R)

ASTM D 6979-03, Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

ASTM D 785-03, Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials (R)

ASTM D 3895-03, Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry (R)

ASTM D 4662-03, Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols (R)

ASTM D 5491-03, Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials (R)

ASTM D 5988-03, Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting (R)

ASTM D 1922-03a, Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method (R)

ASTM D 3262-03, Specification for "Fiberglass " Glass-Fiber-Reinforced Thermosetting-Resin Sewer Pipe (R)

ASTM D 3517-03, Specification for "Fiberglass " Glass-Fiber-Reinforced Thermosetting-Resin Pressure Pipe (R)

ASTM D 5836-03, Test Method for Determination of 2,4-Toluene Diisocyanate 2,4-TDI and 2,6-Toluene Diisocyanate 2,6-TDI in Workplace Atmospheres 1-2 Pp Method (R)

ASTM D 6348-03, Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared FTIR Spectroscopy (R)

ASTM D 1799-03a, Practice for Carbon Black — Sampling Packaged Shipments (R)

ASTM D 3765-03a, Test Method for Carbon Black — CTAB Cetyltrimethylammonium Bromide Surface Area (R)

ASTM D 6915-03a, Practice for Carbon Black — Evaluation of Standard Reference Blacks (R)

ASTM D 1816-03, Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes (R)

ASTM D 1933-03, Specification for Nitrogen Gas as an Electrical Insulating Material (R)

ASTM D 6181-03, Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin (R)

ASTM D 6076-03, Test Method for Shrinkage Temperature of Leather (R)

ASTM E 2296-03, Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

ASTM E 135-03b, Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (R)

ASTM E 135-03c, Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (R)

ASTM E 276-03, Test Method for Particle Size or Screen Analysis at No. 4 4.75-mm Sieve and Finer for Metal-Bearing Ores and Related Materials (R)

ASTM E 367-03 (Includes change to title), Methods for Chemical Analysis of Ferroniobium (R)

ASTM E 389-03, Test Method for Particle Size or Screen Analysis at No. 4 4.75-mm Sieve and Coarser for Metal-Bearing Ores and Related Materials (R)

ASTM E 463-03, Test Method for Silica in Fluorspar by the Silico-Molybdate Visible Spectrometry (R)

ASTM E 507-03 (Includes change to title), Test Method for Aluminum in Iron Ores by Atomic ABSorption Spectrometry (R)

ASTM E 508-03 (Includes change to title), Test Method for Calcium and Magnesium in Iron Ores by Atomic ABSorption Spectrometry (R)

ASTM E 877-03, Practice for Sampling and Sample Preparation of Iron Ores and Related Materials (R)

ASTM E 1568-03, Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry (R)

ASTM E 1569-03, Test Method for Determination of Oxygen in Tantalum Powder (R)

ASTM E 478-03, Test Methods for Chemical Analysis of Copper Alloys (R)

ASTM E 975-03, Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation (R)

ASTM E 1472-03, Guide for Documenting Computer Software for Fire Models (R)

ASTM E 2058-03, Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus FPA (R)

ASTM E 2067-03, Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests (R)

ASTM E 2321-03, Practice for Use of Test Methods E 96

ASTM E 661-03, Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads (R)

ASTM E 695-03, Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading (R)

ASTM E 779-03, Test Method for Determining Air Leakage Rate by Fan Pressurization (R)

ASTM E 864-03, Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels (R)

ASTM E 1368-03, Practice for Visual Inspection of Asbestos Abatement Projects (R)

ASTM E 1556-03, Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair (R)

ASTM E 1602-03, Guide for Construction of Solid Fuel Burning Masonry Heaters (R)

ASTM E 1663-03, Classification for Serviceability of an Office Facility for Typical Office Information Technology (R)

ASTM E 1796-03, Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings (R)

ASTM E 1797-03, Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings (R)

ASTM E 1728-03, Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination (R)

ASTM E 1792-03, Specification for Wipe Sampling Materials for Lead in Surface Dust (R)

ASTM E 740-03, Practice for Fracture Testing with Surface-Crack Tension Specimens (R)

ASTM F 1736-03 (Includes change to title), Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms (R)

ASTM E 2251-03a, Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids (R)

ASTM E 2315-03, Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure

ASTM E 2316-03, Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides

ASTM F 2252-03, Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape

ASTM F 2312-03, Terminology Relating to Tissue Engineered Medical Products

ASTM F 2313-03, Specification for Virgin Poly Glycolide and Poly Glycolide-Co-Lactide Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 Glycolide

ASTM F 2347-03, Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications

ASTM F 619-03, Practice for Extraction of Medical Plastics (R)

ASTM F 1439-03, Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials (R)

ASTM F 1781-03, Specification for Elastomeric Flexible Hinge Finger Total Joint Implants (R)

ASTM F 548-03a, Test Method for Intensity of Scratches on Aerospace Transparent Plastics (R)

ASTM F 2337-03, Test Method for Treestand Fall Arrest System

ASTM F 1446-03, Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear (R)

ASTM F 1632-03, Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes (R)

ASTM D 2657-03, Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings (R)

ASTM D 3035-03, Specification for Polyethylene PE Plastic Pipe Dr-PR Based on Controlled Outside Diameter (R)

ASTM F 2019-03, Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic GRP Cured-in-place Thermosetting Resin Pipe CIPP (R)

ASTM D 2513-03b, Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings (R)

DIN EN 13031-1: 2003 – Greenhouses – Design and construction – Part 1: Commercial production greenhouses
Supersedes parts of DIN V 11535-1: 1998 Ed. EURO 214.30

DIN ISO 13276: 2003 – Tobacco and tobacco products – Determination of nicotine purity – Gravimetric method using tungstosilicic acid EURO 43.70

DIN EN ISO 16663-1: 2003 – Fishing nets – Method of test for the determination of mesh size – Part 1: Opening of mesh EURO 65.60

DIN EN ISO 16663-2: 2003 – Fishing nets – Method of test for the determination of mesh size – Part 2: Length of mesh EURO 58.70

DIN EN 12312-4: 2003 – Aircraft ground support equipment – Specific requirements – Part 4: Passenger boarding brigdes EURO 109.30

DIN EN 899: 2003 – Chemicals used for treatment of water intended for human consumption – Sulfuric acid EURO 102.30

DIN EN 14035-4: 2003 – Fireworks – Part 4: Bangers and banger batteries – Specification and test methods EURO 116.00

DIN EN 14035-12: 2003 – Fireworks – Part 12: Flash bangers and flash banger batteries – Specification and test methods EURO 116.00

DIN EN 14035-19: 2003 – Fireworks – Part 19: Hand-held sparklers – Specification and test methods EURO 109.30

DIN EN 14035-23: 2003 – Fireworks – Part 23: Non-hand-held sparklers – Specification and test methods EURO 109.30

DIN EN 40-3-3: 2003 – Lighting Columns – Part 3-3: Design & verification – Verification by calculation EURO 116.00

DIN EN 12272-2: 2003 – Surface dressing – Test methods – Part 2: Visual assessment of defects EURO 72.70

DIN EN 12697-9: 2003 – Bituminous mixtures – Test methods for hot mix asphalt – Part 9: Determination of the reference density EURO 65.60

DIN EN 12697-23: 2003 – Bituminous mixtures – Test methods for hot mix asphalt – Part 23: Determination of the indirect tensile strength of bituminous specimens EURO 72.70

DIN EN 13285: 2003 – Unbound mixtures – Specification EURO 94.70

DIN EN 13286-44: 2003 – Unbound and hydraulically bound mixtures – Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag EURO 65.60

DIN EN 13481-7: 2003 – Railway applications – Track – Performance requirements for fastening systems – Part 7: Special fastening systems for switches and crossing and check rails EURO 72.70

DIN EN 13880-4: 2003 – Hot-applied joint sealants – Part 4: Test method for the determination of heat resistance – Change in penetration value EURO 51.00

DIN EN 14187-1: 2003 – Cold-applied joint sealants – Part 1: Test method for the determination of rate of cure EURO 58.70

DIN EN 232: 2003 – Baths – Connecting dimensions EURO 72.70

DIN EN 251: 2003 – Shower trays – Connecting dimensions EURO 65.60

DIN EN 771-4: 2003 – Specification for masonry units – Part 4: Autoclaved aerated concrete masonry units
Supersedes 2000 Edn. and parts of DIN V 4165: 2003 Edn. EURO 102.30

DIN EN 998-1: 2003 – Specification for mortar for masonry – Part 1: Rendering and plastering mortar
This standard supersedes parts of DIN 18550-1 and DIN 18550-2: 1985 Edns., DIN 18550-3: 1991 Edn., and DIN 18550-4: 1983 Edn. and, together with DIN EN 998-2: 2003 Edn., supersedes DIN 18557: 1997 Edn. EURO 94.70

DIN EN 998-2: 2003 – Specification for mortar for masonry – Part 2: Masonry mortar
This standard supersedes parts of DIN 1053-1: 1996 Edn. and, together with DIN EN 998-1: 2003 Edn., supersedes DIN 18557: 1997 Edn. EURO 102.30

DIN EN 1253-1: 2003 – Gullies for buildings – Part 1: Requirements EURO 87.90

DIN EN 1856-1: 2003 – Chimneys – Requirements of metal chimneys – Part 1: System chimney products EURO 135.80

DIN EN 1858: 2003 – Chimneys – Components – Concrete flue blocks EURO 130.10

DIN EN 12210: 2003 – Windows and doors – Resistance to wind load – Classification
Supersedes 2000 Edn. and parts of DIN 18055: 1981 Edn. EURO 51.00

DIN EN 12405: 2003 – Gas meters – Gas-volume electronic conversion devices EURO 142.80

DIN EN 12831: 2003 – Heating systems in buildings – Method for calculation of the design heat load
Supersedes DIN 4701-1 and DIN 4701-2: 1983 Edns., and DIN 4701-3: 1989 Edn. EURO 171.60

DIN EN 12978: 2003 – Industrial, commercial and garage doors and gates – Safety devices for power-operated doors and gates – Requirements and test methods EURO 109.30

DIN EN 13062: 2003 – Products and systems for the protection and repair of concrete structures – Test methods – Determination of thixotropy of products for protection of reinforcement EURO 51.00

DIN EN 13198: 2003 – Precast concrete products – Street furniture and garden products EURO 87.90

DIN EN 13403: 2003 – Ventiliation for buildings – Non-metallic ducts – Ductwork made from insulation ductboards EURO 102.30

DIN EN 13892-5: 2003 – Methods of test for screed materials – Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer EURO 65.60

DIN EN 13892-7: 2003 – Methods of test for screed materials – Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings EURO 65.60

DIN EN 13941: 2003 – Design and installation of pre insulated bonded pipe systems for district heating EURO 228.50

DIN EN 71-8: 2003 – Safety of toys – Part 8: Swings, slides and similar activity toys for indoor and outdoor family domestic use
Supersedes parts of DIN EN 71-1: 1998 Edn. EURO 116.00

DIN EN 509/A1: 2003 – Decorative fuel-effect gas appliances
Modifies DIN EN 509: 2000 Edn. EURO 72.70

DIN EN 613/A1: 2003 – Independent gas-fired convection heaters
Modifies DIN EN 613: 2001 Edn. EURO 65.60

DIN EN 957-2: 2003 – Stationary training equipment – Part 2: Strength training equipment – Additional specific safety requirements and test methods EURO 80.60

DIN EN 957-9: 2003 – Stationary training equipment – Part 9: Elliptical trainers – Additional specific safety requirements and test methods EURO 72.70

DIN EN 13138-1: 2003 – Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn
Supersedes DIN 7874: 1995 Edn. EURO 109.30

DIN EN 13229/A1: 2003 – Inset appliances including open fires fired by solid fuels – Requirements and test methods
Modifies DIN EN 13229: 2002 Edn. EURO 102.30

DIN EN ISO 11554: 2003 – Optics and optical instruments – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics EURO 109.30

DIN EN ISO 11670: 2003 – Lasers and laser-related equipment – Test methods for laser beam parameters – Beam positional stability EURO 109.30

DIN EN ISO 12005: 2003 – Lasers and laser-related equipment – Test methods for laser beam parameters – Polarization EURO 102.30

DIN EN ISO 17526: 2003 – Optics and optical instruments – Lasers and laser-related equipment – Lifetime of lasers EURO 102.30

DIN EN 71-2: 2003 – Safety of toys – Part 2: Flammability EURO 94.70

DIN EN 144-1: 2003 – Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector EURO 87.90

DIN EN 402: 2003 – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full-face mask or mouthpiece assembly for escape – Requirements, testing, marking EURO 123.30

DIN EN 659: 2003 – Protective gloves for firefighters EURO 72.70

DIN EN 858-2: 2003 – Separator systems for light liquids (e.g. oil and petrol) – Part 2: Selection of nominal size, installation, operation and maintenance
This standard, together with DIN EN 858-1: 2001 Edn., and DIN 1999-100: 2003 Edn., supersedes DIN 1999-1: 1976 Edn., DIN 1999-2: 1989 Edn., DIN 1999-3: 1978 Edn., and DIN 1999-4 to DIN 1999-6: 1991 Edns. EURO 102.30

DIN EN 1005-2: 2003 – Safety of machinery – Human physical performance – Part 2: Manual handling of machinery and component parts of machinery EURO 116.00

DIN EN 1032: 2003 – Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value
Supersedes 1996 Edn. and DIN EN 1032/A1: 1998 Edn. EURO 116.00

DIN EN 1991-1-2: 2003 – Eurocode 1: Actions on structures – Part 1-2: General actions – Actions on structures exposed to fire
Supersedes DIN V ENV 1991-2-2: 1997 Edn. EURO 148.90

DIN EN 12094-2: 2003 – Fixed firefighting systems – Components for gas extinguishing systems – Part 2: Requirements and test methods for non-electrical automatic control and delay devices EURO 102.30

DIN EN 12094-10: 2003 – Fixed firefighting systems – Components for gas extinguishing systems – Part 2: Requirements and test methods for pressure gauges and pressure switches EURO 87.90

DIN EN 12101-2: 2003 – Smoke and heat control systems – Part 2: Specification for natural smoke and heat exhaust ventilators
Supersedes DIN 18232-3: 1984 Edn. EURO 116.00

DIN EN 12506: 2003 – Characterization of waste – Analysis of eluates – Determination of pH, As, Ba, Cd, Cl¯, Co, Cr, Cr (VI), Cu, Mo, Ni, NO2¯, Pb, total S, So4²¯, V and Zn
Supersedes DIN V ENV 12506: 2000 Edn. EURO 94.70

DIN EN 13370: 2003 – Characterization of waste – Analysis of eluates – Determination of ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN¯ and F¯
Supersedes DIN V ENV 13370: 2001 Edn. EURO 87.90

DIN EN 13673-1: 2003 – Determination of the maximum explosion pressure and the maximum pressure rise of gases and vapours – Part 1: Determination of the maximum explosion pressure EURO 94.70

DIN EN 13946: 2003 – Water quality – Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers EURO 94.70

DIN EN 14116: 2003 – Tanks for transport of dangerous goods – Digital interface for the product recognition device EURO 116.00

DIN EN 14533: 2003 – Textiles and textile products – Burning behaviour of bedding items – Classification scheme EURO 58.70

DIN EN ISO 15011-2: 2003 – Laboratory method for sampling fume and gases generated by arc welding – Part 2: Determination of emission rates of gases, except ozone EURO 80.60

DIN EN ISO 17495: 2003 – Water quality – Determination of selected nitrophenols – Method by solid-phase extraction and gas chromatography with mass spectrometric detection EURO 109.30

DIN EN ISO 16017-2: 2003 – Indoor, ambient and workplace air – Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography – Part 2: Diffusive sampling EURO 135.80

DIN EN ISO 16104: 2003 – Packaging – Transport packaging for dangerous goods – Test methods EURO 156.30

DIN EN ISO 20823: 2003 – Petroleum and related products – Determination of the flammability characteristics of fluids in contact with hot surfaces – Manifold ignition test EURO 72.70

DIN EN 417: 2003 – Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances – Construction, inspection, testing and marking EURO 109.30

DIN EN 12067-1/A1: 2003 – Gas/air ratio controls for gas burners and gas burning appliances – Part 1: Pneumatic types
Modifies DIN EN 12067-1: 1998 Edn. EURO 51.00

DIN EN 13121-1: 2003 – GRP tanks and vessels for use above ground – Part 1: Raw materials – Specification conditions and acceptance conditions EURO 102.30

DIN EN 13152: 2003 – Specification and testing of LPG cylinder valves, self-closing EURO 94.70

DIN EN 13153: 2003 – Specification and testing of LPG cylinder valves, manually operated EURO 102.30

DIN EN 13160-1: 2003 – Leak detection systems – Part 1: General principles EURO 123.30

DIN EN 13160-2: 2003 – Leak detection systems – Part 2: Pressure and vacuum systems EURO 102.30

DIN EN 13160-3: 2003 – Leak detection systems – Part 3: Liquid systems of tanks EURO 94.70

DIN EN 13160-4: 2003 – Leak detection systems – Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces EURO 102.30

DIN EN 13160-6 2003 – Leak detection systems – Part 6: Sensors in monitoring wells EURO 58.70

DIN EN 13160-7: 2003 – Leak detection systems – Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets EURO 109.30

DIN EN 13175: 2003 – Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings EURO 109.30

DIN EN 13458-3: 2003 – Cryogenic vessels – Static vacuum insulated vessels – Part 3: Operational requirements EURO 102.30

DIN EN 13509: 2003 – Cathodic protection measurement techniques
Supersedes DIN 50925: 1992 Edn. EURO 123.30

DIN EN 13953: 2003 – Pressure-relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) EURO 87.90

DIN EN 14130: 2003 – Foodstuffs – Determination of vitamin C by HPLC EURO 87.90

DIN EN 14132: 2003 – Foodstuffs – Determination of ochratoxin A in barley and roasted coffee HPLC method with immunoaffinity column clean-up EURO 94.70

DIN EN 14148: 2003 – Foodstuffs – Determination of vitamin K1 by HPLC EURO 94.70

DIN EN 14152: 2003 – Foodstuffs – Determination of vitamin B2 by HPLC EURO 87.90

DIN EN 14481: 2003 – Materials and articles in contact with foodstuffs – Plastics – Test methods for the determination of fatty contact EURO 80.60

DIN EN ISO 1107: 2003 – Fishing nets – Netting – Basic terms and definitions EURO 65.60

DIN EN ISO 8092-2: 2003 – Road vehicles – Connections for on-board electrical wiring harnesses – Part 2: Definitions, test methods and general performance requirements EURO 123.30

DIN EN 13248: 2003 – Cookware – Coffee makers for domestic use with an independent heat source – Definitions, requirements and test methods EURO 87.90

DIN EN 13857-1: 2003 – Explosives for civil uses – Part 1: Terminology EURO 72.70

DIN EN 14067-1: 2003 – Railway applications – Aerodynamics – Part 1: Symbols and units EURO 72.70

DIN EN ISO 16348: 2003 – Metallic and other inorganic coatings – Definitions and conventions concerning appearance EURO 58.70

DIN EN 1094-3: 2003 – Insulating refractory products – Part 3: Classification of insulating products made from ceramic fibres
Supersedes DIN V ENV 1094-3: 1998 Edn. EURO 58.70

DIN EN 1159-1: 2003 – Advanced technical ceramics – Ceramic composites – Thermophysical properties – Part 1: Determination of thermal expansion
Supersedes DIN V ENV 1159-1: 1993 Edn. EURO 87.90

DIN EN 12291: 2003 – Advanced technical ceramics – Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure – Determination of compression properties
Supersedes DIN V ENV 12291: 1996 Edn. EURO 102.30

DIN EN ISO 3823-2: 2003 – Dentistry – Rotary bur instruments – Part 2: Finishing burs
Supersedes DIN EN 23823-2: 1991 Edn. EURO 148.90

DIN EN ISO 11990: 2003 – Optics and optical instruments – Lasers and laser-related equipment – Determination of laser resistance of tracheal tube shafts EURO 94.70

DIN EN 13826: 2003 – Peak expiratory flowmeters EURO 109.30

DIN EN ISO 14155-1: 2003 – Clinical investigation of medical devices for human subjects – Part 1: General requirements
This standard, together with DIN EN ISO 14155-2: 2003 Edn., supersedes DIN EN 540: 1993 Edn. EURO 116.00

DIN EN ISO 14155-2: 2003 – Clinical investigation of medical devices for human subjects – Part 2: Clinical investigation plans
This standard, together with DIN EN ISO 14155-1: 2003 Edn., supersedes DIN EN 540: 1993 Edn. EURO 87.90

DIN EN 14180: 2003 – Sterilizers for medical purposes – Low temperature steam and formaldehyde sterilizers – Requirements and testing
This standard supersedes DIN 58948-12: 1988 Edn., and DIN 58948-13: 1987 Edn., and together with DIN 58948-17: 2001 Edn., supersedes DIN 58948-15: 1989 Edn. EURO 156.30

DIN ISO 1009: 2003 – Photography – Paper dimensions – Rolls for printers EURO 53.30

DIN EN 1011-5: 2003 – Welding – Recommendations for welding of metallic materials – Part 5: Welding of clad steel
This standard, together with DIN EN ISO 9692-4: 2003 Edn., supersedes DIN 8553: 1991 Edn. EURO 80.60

DIN 2181: 2003 – Screwing taps in sets of 2 taps for M1 x 0,2 to M52 x 4 ISO metric screw threads – Dimensions EURO 58.70

DIN EN ISO 4527: 2003 – Metallic coatings – Autocatalytic (electroless) nickel-phosphorus alloy coatings – Specification and test methods
Supersedes DIN 50966: 1988 Edn. EURO 116.00

DIN EN ISO 8166: 2003 – Resistance welding – Procedure for the evaluation of the life of spot welding electrodes using constant machine settings EURO 94.70

DIN EN 10169-3: 2003 – Continuously organic coated (coil coated) steel flat products – Part 3: Products for building interior applications EURO 102.30

DIN EN 13067: 2003 – Plastics welding personnel – Qualification testing of welders – Thermoplastics welded assemblies EURO 116.00

DIN EN 13144: 2003 – Metallic and other inorganic coatings – Method for quantitative measurement of adhesion by tensile test EURO 72.70

DIN EN 14131: 2003 – Foodstuffs – Determination of folate by microbiological assay EURO 102.30

DIN EN ISO 16140: 2003 – Microbiology of food and animal feeding stuffs – Protocol for the validation of alternative methods EURO 178.50

DIN 74: 2003 – Countersinks for countersunk head screws (except screws with DIN EN 27721 head)
Supersedes DIN 74-1: 2000 Edn. EURO 51.00

DIN 6330: 2003 – Hexagon nuts with a height of 1,5 d EURO 58.70

DIN 6331: 2003 – Hexagon nuts collar, with a height of 1,5 d EURO 58.70

DIN 6332: 2003 – Grub screws with thrust point EURO 65.60

DIN EN 14218: 2003 – Hexagon nuts with flange – Fine pitch thread EURO 65.60

DIN EN 14219: 2003 – Hexagon bolts with flange with metric fine pitch thread – Small series EURO 72.70

DIN EN 573-3: 2003 – Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 3: Chemical composition EURO 94.70

DIN EN ISO 643: 2003 – Steel – Micrographic determination of the apparent grain size
Supersedes DIN 50601: 1985 Edn. EURO 130.10

DIN EN 1179: 2003 – Zinc and zinc alloys – Primary zinc EURO 58.70

DIN EN 10028-6: 2003 – Flat products made of steels for pressure purposes – Part 6: weldable fine grain steels, quenched and tempered EURO 80.60

DIN EN 10152: 2003 – Electrolytically zinc coated cold rolled steel flat products for cold forming – Technical delivery conditions EURO 94.70

DIN EN 10276-2: 2003 – Determination of oxygen content in steel and iron – Part 2: Infrared method after fusion under inert gas EURO 72.70

DIN EN 10292: 2003 – Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming – Technical delivery conditions EURO 109.30

DIN EN 10305-4: 2003 – Steel tubes for precision applications – Technical delivery conditions – Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems EURO 102.30

DIN EN 10319-1: 2003 – Metallic materials – Tensile stress relaxation testing – Part 1: Procedure for testing machines EURO 94.70

DIN EN 12441-2: 2003 – Zinc and zinc alloys – Chemical analysis – Part 2: Determination of magnesium in zinc alloys – Flame atomic absorption spectrometric method EURO 72.70

DIN EN ISO 15349-2: 2003 – Unalloyed steel – Determination of low carbon content – Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) EURO 94.70

DIN EN 573-3: 2003 – Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 3: Chemical composition EURO 94.70

DIN 254: 2003 – Geometrical product specifications (GPS) – Series of conical tapers and taper angles
This standard, together with DIN EN ISO 1119: 2003 Edn., supersedes 2000 Edn. EURO 80.60

DIN EN 562: 2003 – Gas welding equipment – Pressure gauges used in welding, cutting and allied processes EURO 94.70

DIN 2299-1: 2003 – NOT GO screw ring gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm to 200 mm EURO 51.00

DIN EN ISO 3882: 2003 – Metallic and other inorganic coatings – Review of methods of measurement of thickness
Supersedes 1995 Edn. and DIN 50982-3: 1987 Edn. EURO 87.90

DIN EN ISO 7779/A1: 2003 – Measurement of airborne noise emitted by information technology and telecommunications equipment – Amendment 1: Noise measurement specification for CD/DVD-ROM drives
Modifies DIN EN ISO 7779: 2002 Edn. EURO 58.70

DIN EN 12470-5: 2003 – Clinical thermometers – Part 5: Performance of infra-red ear thermometers (with maximum device) EURO 123.30

DIN EN 12736: 2003 – Electrically propelled road vehicles – Airborne acoustical noise of vehicle during charging with on-board chargers – Determination of sound power level EURO 72.70

DIN EN 13023: 2003 – Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment – Accuracy grades 2 and 3
Supersedes DIN 45635-27: 1989 Edn. and DIN 45635-42: 1984 Edn. EURO 130.10

DIN EN 13363-1: 2003 – Solar protection devices combined with glazing – Calculation of solar and light transmittance – Part 1: Simplified method EURO 72.70

DIN EN 13523-22: 2003 – Coil coated metals – Test methods – Part 22: Colour difference – Visual comparison EURO 65.60

DIN EN 13373: 2003 – Natural stone test methods – Determination of geometric characteristics on units EURO 102.30

DIN EN 13854: 2003 – Manufactured articles solely filled with feather and down – Requirements for upholstered parts and cushions EURO 65.60

DIN EN 13891: 2003 – Tensional strapping – Guide to selection and use of tensional strapping EURO 102.30

DIN EN 14053: 2003 – Packaging – Packagings manufactured from corrugated or solid fibreboard – Types and construction
This standard, together with DIN EN 14054: 2003 Edn., supersedes DIN 55429-1: 1985 Edn. EURO 109.30

DIN EN 14054: 2003 – Packaging – Paper and paperboard packaging – Design of cartons
This standard, together with DIN EN 14053: 2003 Edn., supersedes DIN 55429-1: 1985 Edn. EURO 87.90

DIN EN ISO 18613: 2003 – Repair of flat wooden pallets EURO 102.30

DIN EN ISO 1519: 2003 – Paints and varnishes – Bend test (cylindrical mandrel) EURO 80.60

DIN EN ISO 2815: 2003 – Paints and varnishes – Buchholz indentation test EURO 80.60

DIN EN ISO 4624: 2003 – Paints, varnishes and plastics – Pull-off test for adhesion
Supersedes DIN EN 24624: 1992 Ed. EURO 94.70

DIN 53177: 2002 – Determination of dynamic viscosity of liquid resins, resin solutions and oils using the ubbelohde capillary viscometer EURO 58.70

DIN EN ISO 2719: 2003 – Determination of flash point – Pensky-Martens closed cup method
Supersedes DIN EN 22719: 1993 Edn. EURO 109.30

DIN EN ISO 4263-2: 2003 – Determination of the ageing behaviour of inhibited oils and fluids – TOST test – Part 2: Procedure for category HFC hydraulic fluids EURO 94.70

DIN 51900-2: 2003 – Determining the gross calorific value of solid and liquid fuels using the isoperibol or static-jacket calorimeter, and calculation of net calorific value EURO 72.70

DIN EN 14067-3: 2003 – Railway applications – Aerodynamics – Part 3: Aerodynamics in tunnels EURO 80.60

DIN EN 13021: 2003 – Winter service machines – Safety requirements
Supersedes DIN 30702-4: 1980 Edn., DIN 30707-1: 1993 Ed., DIN 30709: 1989 Edn., and parts of DIN 30701: 1986 Edn., DIN 307707-2: 1983 Edn. and DIN 30725-4: 1990 Edn. EURO 109.30

DIN EN 13524: 2003 – Highway maintenance machines – Safety requirements EURO 109.30

DIN EN ISO 868: 2003 – Plastics and ebonite – Determination of indentation hardness by means of a durometer (Shore hardness) EURO 72.70

DIN EN ISO 899-1: 2003 – Plastics – Determination of creep behaviour – Part 1: Tensile creep EURO 94.70

DIN EN ISO 899-2: 2003 – Plastics – Determination of creep behaviour – Part 2: Flexural creep by three-point loading EURO 94.70

DIN EN 1942: 2003 – Self adhesive tapes – Measurement of thickness EURO 58.70

DIN EN ISO 11403-1: 2003 – Plastics – Acquisition and presentation of comparable multipoint data – Part 1: Mechanical properties EURO 102.30

DIN EN 12608: 2003 – Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Classification, requirements and test methods EURO 102.30

DIN EN ISO 105-C09: 2003 – Textiles – Test for colour fastness – Part C09: Colour fastness to domestic and commercial laundering – Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator EURO 72.70

DIN EN ISO 2417: 2003 – Leather – Physical and mechanical tests- Determination of static absorption of water
Supersedes DIN 53330: 1978 Edn. EURO 65.60

DIN EN ISO 2418: 2003 – Leather – Chemical, physical and mechanical and fastness tests – Sampling location
Supersedes DIN 53302-1: 1990 Edn., and DIN 53302-2: 1968 Edn. EURO 65.60

DIN EN ISO 2419: 2003 – Leather – Physical and mechanical tests – Sample preparation and conditioning
Supersedes DIN 53303-1: 1979 Edn. EURO 51.00

DIN EN ISO 2420: 2003 – Leather – Physical and mechanical tests – Determination of apparent density
Supersedes DIN 53327: 1989 Edn. EURO 51.00

DIN EN ISO 2589: 2003 – Leather – Physical and mechanical tests – Determination of thickness
Supersedes DIN 53326: 1978 Edn. EURO 65.60

DIN EN ISO 3376: 2003 – Leather – Physical and mechanical tests – Determination of tensile strength and percentage extension
Supersedes DIN 53328: 1979 Edn. EURO 65.60

DIN EN ISO 3377-2: 2003 – Leather – Physical and mechanical tests – Determination of tear load – Part 2: Double edge tear
This standard, together with DIN EN ISO 3377-1: 2003 Edn., Supersedes DIN 53329: 1982 Edn. EURO 65.60

DIN EN ISO 3378: 2003 – Leather – Physical and mechanical tests – Determination of resistance to grain cracking and grain crack index
Supersedes DIN 53324: 1973 Edn. EURO 72.70

DIN EN ISO 3380: 2003 – Leather – Physical and mechanical tests – Determination of shrinkage temperature up to 100 °C EURO 65.60

DIN EN ISO 5402: 2003 – Leather – Physical and mechanical tests – Determination of flex resistance by the flexometer method
This standard, together with DIN 53351: 2003 Edn., supersedes DIN 53351: 1983 Edn. EURO 65.60

DIN EN ISO 5403: 2003 – Leather – Physical and mechanical tests – Determination of water resistance of flexible leather
Supersedes DIN 53338: 1976 Edn. EURO 72.70

DIN EN ISO 5404: 2003 – Leather – Physical and mechanical tests – Determination of the water resistance of heavy lathers EURO 72.70

DIN EN 13113: 2003 – Tannery machines – Roller coating machines – Safety requirements EURO 116.00

DIN EN ISO 13426-1: 2003 – Geotextiles and geotextile-related products – Strength of internal structural junctions – Part 1: Geocells EURO 80.60

DIN EN 13758-2: 2003 – Textiles – Solar UV protective properties – Part 2: Classification and marking of apparel EURO 58.70

DIN EN 13855-1: 2003 – Manufactured articles solely filled with feathers and down – Measurement of thickness and compressibility of cushions – Part 1: Test method by rotation EURO 65.60

DIN EN 13855-2: 2003 – Manufactured articles solely filled with feathers and down – Measurement of thickness and compressibility of cushions – Part 2: Test method by oscillation EURO 65.60

DIN EN 14215: 2003 – Textile floor coverings – Classification of machine-made pile rugs and runners EURO 80.60

DIN EN ISO 14268: 2003 – Leather – Physical and mechanical tests – Determination of water vapour permeability
Supersedes DIN 53333: 1981 Edn. EURO 72.70

DIN EN ISO 17186: 2003 – Leather – Physical and mechanical tests – Determination of surface coating thickness EURO 58.70

DIN EN ISO 17227: 2003 – Leather – Physical and mechanical tests – Determination of dry heat resistance of leather EURO 65.60

DIN EN ISO 17229: 2003 – Leather – Physical and mechanical tests – Determination of water vapour absorption EURO 65.60

DIN EN ISO 17233: 2003 – Leather – Physical and mechanical tests – Determination of cold crack temperature of surface coatings EURO 58.70

DIN EN ISO 17235: 2003 – Leather – Physical and mechanical tests – Determination of softness EURO 58.70

DIN EN ISO 17236: 2003 – Leather – Physical and mechanical tests – Determination of extension set EURO 58.70

DIN EN 336: 2003 – Structural timber – Sizes, permitted deviations EURO 51.00

DIN EN 338: 2003 – Structural timber – Strength classes EURO 58.70

DIN EN 622-1: 2003 – Fibreboard – Specifications – Part 1: General requirements EURO 58.70

DIN EN 13353: 2003 – Solid wood panels (SWP) – Requirements EURO 65.60

DIN EN 13889: 2003 – Forged steel shackles for general lifting purposes – Dee shackles and bow shackles, grade 6 – Safety EURO 109.30

DIN EN 14222: 2003 – Stainless steel shell boilers EURO 80.60

DIN EN 14508: 2003 – Postal services – Quality of service – Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail EURO 65.60

DIN EN ISO/IEC 15438: 2003 – Information technology – Automatic identification and data capture techniques – Bar code symbology specifications (PDF 417) EURO 214.30

IEC 60245-8 Ed. 1.1 (2004-01) - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
Details the particular specifications for rubber or cross-linked polyvinyl chloride insulated and rubber or cross-linked polyvinyl chloride sheathed cords of rated voltage 300/300 V, for use in applications where high flexibility is required, for example iron cords. SFr. 81.00

IEC 60439-1 Amd.1 Ed. 4.0 (2004-01) - Amendment 1 - Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies SFr. 109.00

IEC 60811-5-1 Ed. 1.1 (2004-01) - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C
Specifies the test methods for filling compounds of electric cables used with telecommunication equipment. Gives the methods for drop-point, separation of oil, lower temperature brittleness, total acid number, absence of corrosive components, permittivity at 23 °C, d.c. resistivity at 23°C and 100°C. SFr. 73.00

IEC 60893-1 Ed. 2.0 (2004-01) - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
Contains the definitions related to, and the general requirements to be fulfilled by, industrial rigid laminated sheets for electrical purposes, made with any of the following resins as the binder: epoxy (epoxide), melamine, phenolic, polyimide, silicone and unsaturated polyester. The following reinforcements may be used either singly or in combination; cellulosic paper, cotton cloth, glass cloth, glass roving, glass mat, polyester cloth and wood veneers. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. The major changes from the previous edition of IEC 60893-1 are the following: a) new material types have been included; b) changes have been made to the property requirements of some existing types; c) a new method for testing permittivity and dissipation factor has been added; d) all non-specification data for each type has been moved to a new Part 4 of IEC 60893. SFr. 41.00

IEC 60896-21 Ed. 1.0 (2004-02) - Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
This part of IEC 60896 applies to all stationary lead-acid cells and monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power supply), in a static location (i.e. not generally intended to be moved from place to place) and incorporated into stationary equipment or installed in battery rooms for use in telecom, uninterruptible power supply (UPS), utility switching, emergency power or similar applications. The objective of this part of IEC 60896 is to specify the methods of test for all types and construction of valve regulated stationary lead acid cells and monobloc batteries used in standby power applications SFr. 129.00

IEC 60896-22 Ed. 1.0 (2004-02) - Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
This part of IEC 60896 applies to all stationary lead-acid cells and monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power supply), in a static location (i.e. not generally intended to be moved from place to place) and incorporated into stationary equipment or installed in battery rooms for use in telecom, uninterruptible power supply (UPS), utility switching, emergency power or similar applications. The objective of this part of IEC 60896 is to assist the specifier in the understanding of the purpose of each test contained within IEC 60896-21 and provide guidance on a suitable requirement that will result in the battery meeting the needs of a particular industry application and operational condition. This standard is used in conjunction with the common test methods described in IEC 60896-21 and is associated with all types and construction of valve regulated stationary lead-acid cells and monoblocs used in standby power applications. SFr. 109.00

IEC 60947-5-2 Ed. 2.2 (2004-01) - Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
Applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. These proximity switches are self-contained, have semiconductor switching elements and are intended to be connected to circuits the rated voltage of which does not exceed 250 V 50 Hz/60 Hz a.c. or 300 V d.c. This Standard is not intended to cover proximity switches with analogue outputs. SFr. 239.00

IEC 61086-1 Ed. 2.0 (2004-01) - Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements
Gives the definitions, classification and general requirements for electrical insulating materials suitable for application as coatings for loaded printed wire boards (conformal coatings). This standard excludes requirements for compatibility between such coatings and printed wire boards, this characteristic being evaluated in individual applications. Surface modifiers are not classified as conformal coatings. They only provide a thin film that does not cure and has low mar resistance. They are excluded from this standard. Materials which conform to this standard meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this standard alone. This edition includes the following significant technical changes from the previous edition: a) a Class 3 material for aerospace applications has been included; b) a new resin type (oligomeric blend material) has been added.
SFr. 33.00

IEC 61959 Ed. 1.0 (2004-01) - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries
This International standard specifies tests and requirements for verifying the mechanical behaviour of sealed portable secondary cells and batteries during handling and normal use SFr. 41.00

IEC 60143-1 Ed. 4.0 (2004-01) - Series capacitors for power systems - Part 1: General
Applies to both capacitor units and capacitor banks intended to be used connected in series with an a.c. transmission or distribution line or circuit forming part of an a.c. power system having a frequency of 15 Hz to 60 Hz. Focuses primarily on transmission application. The series capacitor units and banks are usually intended for high-voltage power systems. This standard is applicable to the complete voltage range. This standard formulates uniform rules regarding performance, testing and rating, formulates specific safety rules and serves as a guide for installation and operation. SFr. 169.00

IEC 60286-6 Ed. 2.0 (2004-02) - Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
is applicable to bulk case packaging capable of containing surface mounting components. The bulk case is designed for transport and storage of components and the supply of components directly or by an appropriate feeder to the placement machine. The bulk case is attached to the automatic handling machine by means of a coupling interface SFr. 59.00

IEC 61076-6 Ed. 1.0 (2004-01) - Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification
Establishes uniform specifications, type test requirements for loose part contacts and gives guidance on the rules for the preparation of detail specifications for loose part contacts, where the electrical, mechanical, environmental and dimensional characteristics of electrical contacts used in elements of electrical connections, including concentric and triaxial contacts, will be defined. SFr. 73.00

IEC 62138 Ed. 1.0 (2004-01) - Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions
Provides requirements for the software of computer-based I&C systems performing functions of safety category B or C as defined by IEC 61226. Complements IEC 60880 and IEC 60880-2, which provide requirements for the software of computer-based I&C systems performing functions of safety category A. Is also consistent with, and complementary to, IEC 61513. SFr. 149.00

IEC 60695-7-3 Ed. 2.0 (2004-02) - Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
Concerns laboratory tests used to measure the toxic components of the fire effluent from either electrotechnical products or materials used in electrotechnical products. It provides guidance on the use and interpretation of results from such tests. It discusses currently available approaches to toxic hazard assessment consistent with the approach of ISO TC 92 SC 3, as set out in ISO/TR 9122-1 to 9122-6, ISO 13344 and ISO/TS 13571. It also provides guidance on the use of toxic potency data in hazard assessment and on principles which underlie the use of combustibility and toxicological information in hazard assessment. The methods described are applicable to data concerning both the incapacitating effects and the lethal effects of fire effluents. The structure of this technical specification remains essentially the same as the first edition but has been usefully expanded in all areas to further clarify the alignment with ISO/TC 92 Fire Safety and in particular with ISO 13344 and ISO/TS 13571. The main topics have been expanded upon to bring them into alignment with the current philosophy for the use and interpretation of test results. - Formulae are given for the calculation of the fraction of the incapacitating dose for each of the asphyxiants, carbon monoxide and hydrogen cyanide. - Volume fractions that are expected to cause incapacitation (F values) are given for some of the more important irritants. - Equations used to predict death are given. - The hyperventilatory effect of carbon dioxide is discussed. Has the status of a basic safety publication in accordance with IEC Guide 104. SFr. 119.00

IEC 61514-2 Ed. 1.0 (2004-01) - Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
specifies design reviews and tests intended to measure and determine the static and dynamic performance, the degree of intelligence and the communication capabilities of single-acting or double-acting intelligent valve positioners. The tests may be applied to positioners which receive standard analogue electrical input signals (as specified in IEC 60381) and/or digital signals via a data communication link and have a pneumatic output. An intelligent valve positioner as defined in Clause 3 is an instrument that uses for performing its functions digital techniques for data processing, decision-making and bi-directional communication. It may be equipped with additional sensors and additional functionality supporting the main function. SFr. 129.00

IEC 60335-2-4 Amd.1 Ed. 5.0 (2004-01) - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors SFr. 24.00

IEC 60335-2-7 Amd.1 Ed. 6.0 (2004-01) - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines SFr. 33.00

IEC 60335-2-29 Amd.1 Ed. 4.0 (2004-01) - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers SFr. 29.00

IEC 60335-2-41 Amd.1 Ed. 3.0 (2004-01) - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps SFr. 24.00

IEC 60335-2-70 Ed. 2.0 (2004-01) - Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines
Deals with milking machines for milking farm animals, for use in stalls or in the open. Examples are bucket and direct-to-can milking machines, milking pipeline machines, recorder milking machines. The rated voltage is less than 250 V for single-phase operation and 480 V for other operations. SFr. 73.00

IEC 60335-2-80 Amd.1 Ed. 2.0 (2004-01) –Amendment 1 - Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans SFr. 22.00

IEC 60335-2-86 Ed. 2.0 (2004-01) - Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines
Deals with the safety of electric fishing machines, in which water may be electrified for catching fish or providing barriers to animals living in water. Examples are mains-operated and battery-operated electric fishing machines. The rated voltage of portable machines is less than 250 V, and less than 1000 V for fixed machines permanently connected to fixed wiring. For electric fence energizers, see IEC 60335-2-76. For electric animal stunning equipment, see IEC 60335-2-87. SFr. 81.00

IEC 60335-2-104 Ed. 1.0 (2004-01) - Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment
Deals with the safety of electrical appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment incorporating open drive or motor-compressors. The maximum rated voltage being not more than 250V for single phase appliances and 600V for all other appliances. SFr. 149.00

IEC 60704-2-3 Ed. 2.0 (2004-01) - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
Applies to single-unit electric dishwashers for household and similar use, with or without automatic programme control, for cold and/or hot water supply, for detachable or permanent connection to water supply or sewage systems, intended for placing on the floor against a wall, for building-in or placing under a counter, a kitchen worktop or under a sink, for wall-mounting or on a counter. Limitations for the use of this test code are given in 1.1.1 of IEC 60704-1. SFr. 59.00

IEC 61003-1 Ed. 2.0 (2004-01) - Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance
is applicable to pneumatic and electric industrial-process instruments using measured values that are continuous signals in accordance with IEC 60382, or IEC 60381-1. The other input value (i.e. the set point value) may be either a mechanical (position, force, etc.) or a standard signal. SFr. 109.00

IEC 62367 Ed. 1.0 (2004-01) - Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line)
This technical specification addresses the safety implications of having xDSL signals on circuits in equipment connected to a TELECOMMUNICATION NETWORK, and gives rules for dealing with such equipment in the context of the IEC 60950 series. SFr. 53.00

IEC 60601-2-17 Ed. 2.0 (2004-01) - Medical electrical equipment - Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment
The use of afterloading equipment for brachytherapy purposes may expose patients to danger if the equipment fails to deliver the required dose to the patient, or if the equipment design does not satisfy standards of electrical and mechanical safety. The equipment may also cause danger to persons in the vicinity if the equipment itself fails to contain the radioactive source(s) adequately within the storage container(s) and/or if there are inadequacies in the design of the treatment room. This Particular Standard establishes requirements to be complied with by manufacturers in the design and construction of afterloading equipment for use in temporary brachytherapy procedures. Its purpose is to identify those features of design that are regarded, at the present time, as essential for the safe operation of such equipment. It places limits on the degradation of equipment performance beyond which it can be presumed that a fault condition exists and where an interlock then operates to return the radioactive source(s) to the storage container(s) and afterwards to prevent continued operation of the equipment. SFr. 119.00

IEC/PAS 62381 Ed. 1.0 (2004-01) - Activities during the factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) for automation systems in the process industry
defines procedures and specifications for the factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT). These tests are carried out to prove that the automation system is in accordance with the specification. SFr.119.00

IEC/PAS 62382 Ed. 1.0 (2004-01) - Electrical and instrumentation loop check
describes the recommended steps to complete a loop check which comprises the activities between the completion of loop construction (including installation and point-to-point checks) and the start-up of the cold commissioning. This document is applicable for the construction of new plants and for expansion/retrofits (i.e. revamping) of E&I installations in existing plants (including PLC, BAS, DCS, Panel-mounted and field instrumentation). It does not include a detailed checkout of power distribution systems except as they relate to the loops being checked (i. e. a motor starter or a power supply to a 4-wire transmitter). SFr. 73.00

IEC 60268-4 Ed. 3.0 (2004-02) - Sound system equipment - Part 4: Microphones
specifies methods of measurement for the electrical impedance, sensitivity, directional response pattern, dynamic range and external influences of sound system microphones, and also gives recommendations as to characteristics to be specified. It applies to sound system microphones for all applications for speech and music SFr. 149.00

IEC 60310 Ed. 3.0 (2004-02) - Railway applications - Traction transformers and inductors on board rolling stock
Applies to traction transformers installed on board rolling stock and to the various types of inductors inserted in the power and auxiliary circuits of electric vehicles. SFr. 109.00

IEC 60695-2-20 Ed. 2.0 (2004-02) - Fire hazard testing - Part 2-20: Glowing/hot wire based test methods - Hot-wire coil ignitability - Apparatus, test method and guidance
Applicable to solid electrical insulating materials. It is intended to measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source. This test method is not valid for determining the ignition behaviour of complete items of equipment, since the dimensions of the insulating systems or combustible parts, the design and heat transfer to adjacent metallic or non-metallic parts, etc. greatly influence the ignitability of the electrical insulating materials used therein. In addition, it is not valid for determining fire behaviour and fire hazard of equipment. The data may be used for the preselection of a material as described in IEC 60695-1-30. The optional Performance Level Category (PLC) system described in Annex B is intended for the preselection of component materials for products. An alternative test for ignitability is IEC 60695-2-13. However, no correlation has been established between IEC 60695-2-20 and IEC 60695-2-13. The status of this publication has been reassigned from an International Standard to a Technical Specification, however, the structure and layout remains essentially the same. Every technical aspect of this test method has been reviewed in an attempt to improve both the repeatability and reproducibility. Annex A has been added for the determination of the test current Ic. Annex B has been added which introduces the concept of a Performance Level Category (PLC). Has the status of a basic safety publication in accordance with IEC Guide 104 SFr. 73.00

IEC 61496-1 Ed. 2.0 (2004-02) - Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
defines a real-time optical serial interface between the control unit and its associate drives which is utilized to transmit periodic and non-periodic data. This interface is intended to apply to industrial machines, such as machine tools, with multiple drives and which can be operated in torque, velocity, or position interface operation modes. SFr. 169.00

IEC 61300-2-1 Ed. 2.0 (2004-01) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
Details a procedure for evaluating the effects of vibration on fibre optic devices at the predominant frequency ranges and magnitudes that may be encountered during field service. SFr. 33.00

IEC 61300-3-5 Ed. 1.0 (2004-02) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelength dependence of attenuation
Aims at measuring the wavelength dependence of the attenuation of a single mode fibre optic device. Can also be used to measure the wavelength dependence of the coupling ratio. SFr. 41.00

IEC 61300-3-7 Ed. 1.0 (2004-02) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss