ASTM A 194/A 194M-04, Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both (R)

ASTM A 962/A 962M-04, Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range (R)

ASTM A 999-04, Specification for General Requirements for Alloy and Stainless Steel Pipe (R)

ASTM A 703/A 703M-04a, Specification for Steel Castings, General Requirements, for Pressure-Containing Parts (R)

ASTM A 985/A 985M-04a, Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts (R)

ASTM A 724/A 724M-04 (Includes change to title), Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels (R)

ASTM A 469-04, Specification for Vacuum-Treated Steel Forgings for Generator Rotors (R)

ASTM A 504/A 504M-04, Specification for Wrought Carbon Steel Wheels (R)

ASTM A 592/A 592M-04, Specification for High-strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels (R)

ASTM A 796/A 796M-04, Practice for Structural Design of Corrugated Steel Pipe, Pipe-arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications (R)

ASTM C 157/C 157M-04, Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete (R)

ASTM C 172-04, Practice for Sampling Freshly Mixed Concrete (R)

ASTM C 1240-04, Specification for Silica Fume Used in Cementitious Mixtures (R)

ASTM C 1362-04, Test Method for Flow of Freshly Mixed Hydraulic-cement Concrete (R)

ASTM C 14M-04, Specification for Concrete Sewer, Storm Drain, and Culvert Pipe (Metric) (R)

ASTM C 118M-04, Specification for Concrete Pipe for Irrigation or Drainage (Metric) (R)

ASTM C 412M-04, Specification for Concrete Drain Tile (Metric) (R)

ASTM C 505M-04, Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket (R)

ASTM C 654M-04, Specification for Porous Concrete Pipe (Metric) (R)

ASTM C 162-04, Terminology of Glass and Glass Products (R)

ASTM C 978-04, Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures (R)

ASTM C 902-04a, Specification for Pedestrian and Light Traffic Paving Brick (R)

ASTM C 1272-04a, Specification for Heavy Vehicular Paving Brick (R)

ASTM C 518-04, Test Method for Steady-state Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (R)

ASTM C 533-04, Specification for Calcium Silicate Block and Pipe Thermal Insulation (R)

ASTM C 578-04, Specification for Rigid, Cellular Polystyrene Thermal Insulation (R)

ASTM C 592-04, Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation Metal-Mesh Covered Industrial Type (R)

ASTM C 612-04, Specification for Mineral Fiber Block and Board Thermal Insulation (R)

ASTM C 680-04 (Includes change to title), Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs (R)

ASTM C 764-04, Specification for Mineral Fiber Loose-Fill Thermal Insulation (R)

ASTM C 1126-04, Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation (R)

ASTM C 1482-04, Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation (R)

ASTM C 1488-04 (Includes Change to Title), Practice for Simulated Aging of Cellulosic Loose-Fill Insulation (R)

ASTM C 1498-04, Test Method for Hygroscopic Sorption Isotherms of Building Materials (R)

ASTM C 1225-04, Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates (R)

ASTM C 1450/C 1450M-04, Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe (R)

ASTM C 1459-04, Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems (R)

ASTM C 1530-04, Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses (R)

ASTM C 1121-04, Test Method for Turner and Newall T and N Wet-Length Classification of Asbestos (R)

ASTM F 109-04, Terminology Relating to Surface Imperfections on Ceramics (R)

ASTM C 1183-04, Test Method for Extrusion Rate of Elastomeric Sealants (R)

ASTM C 1519-04, Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures (R)

ASTM C 1523-04, Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants (R)

ASTM C 1366-04, Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures (R)

ASTM C 1525-04, Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching (R)

ASTM C 1424-04, Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature (R)

ASTM D 7054-04, Specification for Cautionary Labeling of Extension Poles for Use with Paint Applicators Distributed in North America

ASTM D 6132-04 (Includes change to title), Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage (R)

ASTM D 1641-04, Practice for Conducting Outdoor Exposure Tests of Varnishes (R)

ASTM D 3258-04 (Includes change to title), Test Method for Porosity of White or Near White Paint Films by Staining (R)

ASTM D 3793-04, Test Method for Low-Temperature Coalescence of Latex Paint Films (R)

ASTM D 5068-04, Practice for Preparation of Paint Brushes for Evaluation (R)

ASTM D 6488-04, Terminology Relating to Print Problems (R)

ASTM D 6583-04 (Includes change to Title), Test Method for Porosity of Paint Film by Mineral Oil Absorption (R)

ASTM D 6901-04, Specification for Artists’ Colored Pencils (R)

ASTM D 4139-04, Guide for Determining Volatile and Nonvolatile Content of Pigments (R)

ASTM D 6687-04, Guide for Testing Printing Ink Vehicles and Components Thereof (R)

ASTM D 1133-04, Test Method for Kauri-Butanol Value of Hydrocarbon Solvents (R)

ASTM D 2379-04, Test Method for Acidity of Formaldehyde Solutions (R)

ASTM D 2380-04, Test Method for Methanol Content of Formaldehyde Solutions (R)

ASTM D 2916-04, Specification for Isophorone (R)

ASTM D 3548-04, Specification for Ethyl Acrylate (R)

ASTM D 3620-04, Specification for Glacial Acetic Acid (R)

ASTM D 4416-04, Specification for Acrylic Acid (R)

ASTM D 5399-04, Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography (R)

ASTM D 7038-04, Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

ASTM D 7039-04, Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

ASTM D 7044-04, Specification for Biodegradable Fire Resistant Hydraulic Fluids

ASTM D 86-04b, Test Method for Distillation of Petroleum Products at Atmospheric Pressure (R)

ASTM D 445-04, Test Method for Kinematic Viscosity of Transparent and Opaque Liquids and the Calculation of Dynamic Viscosity (R)

ASTM D 611-04, Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents (R)

ASTM D 975-04a, Specification for Diesel Fuel Oils (R)

ASTM D 4055-04, Test Method for Pentane Insolubles by Membrane Filtration (R)

ASTM D 4485-04, Specification for Performance of Engine Oils (R)

ASTM D 4806-04, Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel (R)

ASTM D 5293-04, Test Method for Apparent Viscosity of Engine Oils Between -5 and -35°C Using the Cold-Cranking Simulator (R)

ASTM D 5372-04, Guide for Evaluation of Hydrocarbon Heat Transfer Fluids (R)

ASTM D 5481-04, Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer (R)

ASTM D 5579-04, Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test (R)

ASTM D 5704-04, Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles (R)

ASTM D 5769-04, Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry (R)

ASTM D 6201-04, Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation (R)

ASTM D 6304-04a, Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (R)

ASTM D 6379-04, Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection (R)

ASTM D 6593-04, Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (R)

ASTM D 6594-04, Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C (R)

ASTM D 6792-04, Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories (R)

ASTM D 6837-04, Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIB Spark Ignition Engine (R)

ASTM D 6838-04, Test Method for Cummins M11 High Soot Test (R)

ASTM D 6973-04, Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump (R)

ASTM D 6974-04, Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures (R)

ASTM D 1752-04a, Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction (R)

ASTM D 3141-04, Specification for Asphalt for Undersealing Portland-cement Concrete Pavements (R)

ASTM D 4311-04, Practice for Determining Asphalt Volume Correction to a Base Temperature (R)

ASTM D 6084-04, Test Method for Elastic Recovery of Bituminous Materials by Ductilometer (R)

ASTM D 6154-04, Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction (R)

ASTM D 6521-04, Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) (R)

ASTM D 6883-04, Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles (R)

ASTM D 225-04, Specification for Asphalt Shingles Organic Felt Surfaced with Mineral Granules (R)

ASTM D 3462-04, Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules (R)

ASTM D 5635-04a, Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens (R)

ASTM D 5869-04, Practice for Dark Oven Heat Exposure of Bituminous Materials (R)

ASTM D 5213-04, Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications (R)

ASTM D 454-04, Test Method for Rubber–Deterioration by Heat and Air Pressure (R)

ASTM D 572-04, Test Method for Rubber–Deterioration by Heat and Oxygen (R)

ASTM D 926-04, Test Method for Rubber Property–Plasticity and Recovery Parallel Plate Method (R)

ASTM D 2702-04, Practice for Rubber Chemicals–Determination of Infrared Absorption Characteristics (R)

ASTM D 7022-04, Terminology Relating to Apparel

ASTM D 7023-04, Terminology Relating to Home Furnishings

ASTM D 1445-00, Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method) (R)

ASTM D 1574-00, Test Method for Extractable Matter in Wool (R)

ASTM D 4038-00, Performance Specification for Women's and Girls' Woven Dress and Blouse Fabrics (R)

ASTM D 5866-00, Test Method for Neps in Cotton Fibers (AFIS-N Instrument) (R)

ASTM D 5867-00, Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments (R)

ASTM D 4725-04, Terminology for Engine Coolants (R)

ASTM D 5752-04, Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines (R)

ASTM D 847-04, Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons (R)

ASTM D 6367-04, Specification for AMS (a-methylstyrene) (R)

ASTM D 7045-04, Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities

ASTM D 7048-04, Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

ASTM D 6684-04, Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems (R)

ASTM D 7066-04, Test Method for Dimer/Trimer of Chlorotrifluoroethylene S-316 Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

ASTM D 5542-04, Test Methods for Trace Anions in High Purity Water by Ion Chromatography (R)

ASTM D 6888-04, Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection (R)

ASTM D 6954-04, Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

ASTM D 7026-04, Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials Via Carbon Isotope Analysis

ASTM D 7029-04, Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0&Mac176;F (82.2&Mac176;C)

ASTM D 256-04, Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (R)

ASTM D 789-04, Test Method for Determination of Relative Viscosity of Polyamide (PA) (R)

ASTM D 2115-04, Practice for Oven Heat Stability of Poly Vinyl Chloride Compositions (R)

ASTM D 3012-04, Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven (R)

ASTM D 4101-04, Specification for Polypropylene Injection and Extrusion Materials (R)

ASTM D 4441-04, Specification for Aqueous Dispersions of Polytetrafluoroethylene (R)

ASTM D 4889-04, Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates (R)

ASTM D 4976-04, Specification for Polyethylene Plastics Molding and Extrusion Materials (R)

ASTM D 7049-04, Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres

ASTM D 3765-04, Test Method for Carbon Black–CTAB (Cetyltrimethylammonium Bromide) Surface Area (R)

ASTM D 4821-04, Guide for Carbon Black–Validation of Test Method Precision and Bias (R)

ASTM E 315-04, Test Methods for Chemical Analysis of Molybdenum (R)

ASTM E 342-04, Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry (R)

ASTM E 396-04, Test Methods for Chemical Analysis of Cadmium (R)

ASTM E 439-04, Test Methods for Chemical Analysis of Beryllium (R)

ASTM E 536-04, Test Methods for Chemical Analysis of Zinc and Zinc Alloys (R)

ASTM E 815-04, Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titration (R)

ASTM E 841-04, Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectrometry (R)

ASTM E 1409-04, Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique (R)

ASTM E 1937-04, Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique (R)

ASTM E 1941-04, Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys (R)

ASTM E 2356-04, Practice for Comprehensive Building Asbestos Surveys

ASTM E 750-04, Practice for Characterizing Acoustic Emission Instrumentation (R)

ASTM E 1418-04, Test Method for Visible Penetrant Examination Using the Water-washable Process (R)

ASTM E 2368-04, Practice for Strain Controlled Thermomechanical Fatigue Testing

ASTM E 1922-04, Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials (R)

ASTM E 1696-04, Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer (R)

ASTM E 284-04, Terminology of Appearance (R)

ASTM E 1331-04, Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry

ASTM E 1225-04, Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique (R)

ASTM E 1269-04, Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry (R)

ASTM E 1530-04, Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique (R)

ASTM E 1582-04, Practice for Calibration of Temperature Scale for Thermogravimetry (R)

ASTM E 1640-04, Test Method for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis (R)

ASTM E 1868-04, Test Method for Loss-On-Drying by Thermogravimetry (R)

ASTM E 927-04, Specification for Solar Simulation for Photovoltaic Testing (R)

ASTM E 2278-04, Guide for Use of Coal Combustion Products Ccps for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage

ASTM E 2324-04, Guide for PDD Paired Testing

ASTM E 2035-04, Terminology Relating to Forensic Psychophysiology (R)

ASTM F 2358-04, Guide for Measuring Characteristics of Sapphire Substrates

ASTM F 2405-04, Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer

ASTM F 1662-04, Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch (R)

ASTM F 2338-04, Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method (R)

ASTM F 2386-04, Guide for Preservation of Tissue Engineered Medical Products Temps

ASTM F 2392-04, Test Method for Burst Strength of Surgical Sealants

ASTM F 748-04, Practice for Selecting Generic Biological Test Methods for Materials and Devices (R)

ASTM F 763-04, Practice for Short-term Screening of Implant Materials (R)

ASTM F 981-04, Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone (R)

ASTM F 1635-04, Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants (R)

ASTM F 1881-04, Test Method for Measuring Baseball Bat Performance Factor (R)

ASTM F 1882-04, Specification for Residential Basketball Systems (R)

ASTM F 1890-04, Test Method for Measuring Softball Bat Performance Factor (R)

ASTM F 2075-04, Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment (R)

ASTM F 2219-04, Test Methods for Measuring High Speed Baseball Bat Performance Factor (R)

ASTM F 1193-04a, Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements (R)

ASTM F 2350-04, Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems

ASTM F 2411-04, Specification for Design and Performance of an Airborne Sense-and-Avoid System

ASTM G 67-04, Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid Namlt Test (R)

ASTM G 101-04, Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels (R)

BS PAS 60-1: 2004 – Equipment used in the controlled removal of asbestos-containing materials – Part 1: Controlled wetting of asbestos-containing materials – Specification £ 44.00

BS EN 302-1: 2004 – Adhesives for load-bearing timber structures – Test methods – Part 1: Determination of bond strength in longitudinal tensile shear strength £ 56.00

BS EN 302-3: 2004 – Adhesives for load-bearing timber structures – Test methods – Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength £ 44.00

BS ISO 513: 2004 – Classification and application of hard cutting materials for metal removal with defined cutting edges – Designation of the main groups and groups of application £ 44.00

BS EN 622-3: 2004 – Fibreboards – Specifications – Part 3: Requirement for medium boards £ 56.00

BS 903-5: 2004 – Physical testing of rubber – Part 5: Guide to the application of rubber testing to finite element analysis £ 108.00

BS EN 1011-7: 2004 – Welding – Recommendations for welding of metallic materials – Part 7: Electron beam welding £ 94.00

BS EN ISO 1135-4: 2004 – Transfusion equipment for medical use – Part 4: Transfusion sets for single use £ 80.00

BS EN ISO 1183-2: 2004 – Plastics – Methods for determining the density of non-cellular plastics – Part 2: Density gradient column method £ 56.00

BS EN 1218-4: 2004 – Safety of woodworking machines – Tenoning machines – Part 4: Edge banding machines fed by chain(s) £ 108.00

BS EN 1366-8: 2004 – Fire resistance tests for service installations – Part 8: Smoke extraction ducts £ 94.00

BS ISO 1832: 2004 – Indexable inserts for cutting tools – Designation £ 80.00

BS ISO 3093: 2004 – Wheat, rye and respective flours, durum wheat and durum wheat semolina – Determination of the falling number according to hagberg-perten £ 56.00

BS EN ISO 5366-1: 2004 – Anaesthetic and respiratory equipment – Tracheostomy tubes – Part 1: Tubes and connectors for use in adults £ 80.00

BS EN ISO 6157-2: 2004 – Fasteners – Surface discontinuities – Part 2: Nuts £ 56.00

BS PD 6662: 2004 – Scheme for the application of European standards for intruder and hold-up alarm systems £56.00

BS EN ISO 7823-3: 2004 – Plastics – Poly (methyl methacrylate) sheets – Types, dimensions and characteristics – Part 3: Continuous cast sheets £ 56.00

BS 7922: 2004 – Electric cables – Fluid-filled, paper-an PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) – Requirements and test methods £ 108.00

BS 7923: 2004 – Electric cables – Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV) – Requirements and test methods £ 80.00

BS ISO 8179-1: 2004 – Ductile iron pipes – External zinc-based coating – Part 1: Metallic zinc with finishing layer £ 44.00

BS EN ISO 8536-8: 2004 – Infusion equipment for medical use – Part 8: Infusion equipment for use with pressure infusion apparatus £ 56.00

BS EN ISO 9337-2: 2004 – Contact lenses – Determination of back vertex power – Part 3: Measurement of contact lenses immersed in saline £ 56.00

BS ISO 10002: 2004 – Quality management – Customer satisfaction – Guidelines for complaints handling in organizations £ 94.00

BS EN 10226-1: 2004 – Pipe threads where pressure tight joins are made on the threads – Part 1: Taper external threads and parallel internal threads – dimensions, tolerances and designation £ 56.00

BS EN ISO 10417: 2004 – Petroleum and natural gas industries – Subsurface safety valve systems – Design, installation, operation and redress £ 94.00

BS EN ISO 10434: 2004 – Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries £ 94.00

BS ISO 10542-5: 2004 – Technical systems and aids for disabled or handicapped persons – Wheelchair tiedown and occupant-restraint systems – Part 5: Systems for specific wheelchairs £ 56.00

BS ISO 10813-1: 2004 – Vibration generating machines – Guidance for selection – Part 1: Equipment for environmental testing £ 94.00

BS EN 12094-4: 2004 – Fixed firefighting systems – Components for gas extinguishing systems – Part 4: Requirements and test methods for container valve assemblies and their actuators £ 94.00

BS EN 12253: 2004 – Road transport and traffic telematics – Dedicated short-range communication – Physical layer using microwave at 5.8 GHz £ 56.00

BS EN 12269-2: 2003 – Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" – Part 2: Long term test £ 44.00

BS EN 12312-17: 2004 – Aircraft ground support equipment – Specific requirements – Part 17: Air conditioning equipment £ 56.00

BS EN 12326-1: 2004 – Slate and stone products for discontinuous roofing and cladding – Part 1: Product specification £ 94.00

BS EN 12369-2: 2004 – Wood-based panels – Characteristic values for structural design – Part 2: Plywood £ 44.00

BS EN 12516-2: 2004 – Industrial valves – Shell design strength – Part 2: Calculation method for steel valve shells £ 114.00

BS EN 12697-16: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 18: Abrasion by studded tyres £ 56.00

BS EN 12697-18: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 18: Binder drainage £ 56.00

BS EN 12697-19: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 19: Permeability of specimen £ 44.00

BS EN 12697-26: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 26: Stiffness £ 108.00

BS EN 12697-31: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 31: Specimen preparation by gyratory compactor £ 56.00

BS EN 12697-38: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 38: Common equipment and calibration £ 56.00

BS EN 13279-2: 2004 – Gypsum binders and gypsum plasters – Part 2: Test methods £ 80.00

BS ISO 13318-3: 2004 – Determination of particle size distribution by centrifugal liquid sedimentation methods – Part 3: Centrifugal X-ray method £ 56.00

BS EN 13372: 2004 – Road Transport and traffic telematics (RTTT) – Dedicated short-range communication – Profiles for RTTT applications £ 56.00

BS EN 13428: 2004 – Packaging – Requirements specific to manufacturing and composition – Prevention by source reduction £ 80.00

BS EN 13429: 2004 – Packaging – Reuse £ 80.00

BS EN 13430: 2004 – Packaging – Requirements for packaging recoverable by material recycling £ 80.00

BS EN 13431: 2004 – Packaging – Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value £ 56.00

BS EN 13453-1: 2004 – Furniture – Bunk beds and high beds for non-domestic use – Part 1: Safety, strength and durability requirements £ 44.00

BS EN 13636: 2004 – Cathodic protection of buried metallic tanks and related piping £ 108.00

BS EN 13705: 2004 – Welding of thermoplastics – Machines and equipment for hot gas welding (including extrusion welding) £ 44.00

BS EN 13775-5: 2004 – Railway applications – Measuring of new and modifies freight wagons – Part 5: Bogies with 3 wheelsets £ 80.00

BS EN 13775-6: 2004 – Railway applications – Measuring of new and modifies freight wagons – Part 6: Multiple and articulated freight wagons £ 56.00

BS EN 13842: 2004 – Oil fired forced convection air heaters – Stationary and transportable for space heating £ 94.00

BS EN 13880-5: 2004 – Hot applied joint sealants – Part 5: Test method for the determination of flow resistance £ 44.00

BS EN 13981-2: 2004 – Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 2: Plates and sheets £ 44.00

BS EN 14054: 2003 – Packaging – Paper and paperboard packaging – Design of cartons £ 56.00

BS EN 14202: 2004 – Blinds and shutters – Suitability for use of tubular and square motorizations – Requirements and test methods £ 44.00

BS EN 14227-1: 2004 – Hydraulically bound mixtures – Specifications – Part 1: Cement bound granular mixtures £ 80.00

BS EN 14227-3: 2004 – Hydraulically bound mixtures – Specifications – Part 3: Fly ash bound mixtures £ 94.00

BS EN 14267: 2004 – Irrigation techniques – Irrigation hydrants £ 94.00

BS EN 14290: 2004 – Zinc and zinc alloys – Secondary raw material £ 56.00

BS EN 14352: 2004 – Foodstuffs – Determination of fumonisin B1 and B2 in maize based foods – HPLC method with immunoaffinity column clean up £ 56.00

BS EN 14407: 2004 – Water quality– Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters £ 56.00

BS EN 14457: 2004 – General requirements for components specifically designed for use in trenchless construction of drains and sewers £ 56.00

BS EN 14526: 2004 – Foodstuffs – Determination of saxitoxin and dc-saxitoxin in mussels – HPLC method using pre-column derivatization with peroxide or periodate oxidation £ 56.00

BS ISO 14594: 2003 – Microbeam analysis – Electron probe microanalysis – Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy £ 80.00

BS PD CEN/TR 14699: 2004 – Office furniture – Terminology £ 56.00

BS EN 14776: 2004 – Space engineering – Ground systems and operations – Telemetry and telecommand packet utilization £ 168.00

BS EN 14777: 2004 – Space engineering – Multipaction design and test £ 126.00

BS EN 14869-1: 2004 – Structural adhesives – Determination of shear behaviour of structural bonds – Part 1: Torsion test method using butt-bonded hollow cylinders £ 56.00

BS EN 14869-2: 2004 – Structural adhesives – Determination of shear behaviour of structural bonds – Part 2: Thick adherends shear test £ 80.00

BS EN ISO 15103-1: 2004 – Plastics – Poly (phenylene ether) (PPE) moulding and extrusion materials – Part 1: Designation system and basis for specifications £ 56.00

BS EN ISO 15103-2: 2004 – Plastics – Poly (phenylene ether) (PPE) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties £ 56.00

BS ISO 15242-1: 2004 – Rolling bearings – Measuring methods for vibration – Part 1: Fundamentals £ 80.00

BS ISO/IEC 15415: 2004 – Information technology – Automatic identification and data capture techniques – Bar code print quality test specification – Two-dimensional symbols £ 114.00

BS ISO/IEC 15423: 2004 – Information technology – Automatic identification and data capture techniques – Bar code scanner and decoder performance testing £ 108.00

BS EN ISO 15526-1: 2004 – Plastics – Polyketone (PK) moulding and extrusion materials – Part 1: Designation system and basis specifications £ 56.00

BS EN ISO 15526-2: 2004 – Plastics – Polyketone (PK) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties £ 56.00

BS EN ISO 15609-4: 2004 – Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 4: Laser beam welding £ 56.00

BS EN ISO 15609-5: 2004 – Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 5: Resistance welding £ 56.00

BS EN ISO 15612: 2004 – Specification and qualification of welding procedures for metallic materials – Qualification by adoption of a standard welding procedure £ 44.00

BS EN ISO 15614-12: 2004 – Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 12: Spot, seam and projection welding £ 56.00

BS ISO 15859-4: 2004 – Space systems – Fluid characteristics, sampling and test methods – Part 4: Helium £56.00

BS ISO 15859-6: 2004 – Space systems – Fluid characteristics, sampling and test methods – Part 6: Monomethylhydrazine propellant £ 44.00

BS ISO 15859-9: 2004 – Space systems – Fluid characteristics, sampling and test methods – Part 9: Argon £ 44.00

BS ISO 16462: 2004 – Cubic boron nitride inserts, tipped or solid – Dimensions, types £ 80.00

BS EN ISO 16484-2: 2004 – Building automation and control systems (BACS) – Part 2: Hardware £ 114.00

BS EN ISO 17641-1: 2004 – Destructive tests on welds in metallic materials – Hot cracking tests for weldments – Arc welding processes – Part 1: General £ 44.00

BS EN ISO 17642-1: 2004 – Destructive tests on welds in metallic materials – Cold cracking tests for weldments – Arc welding processes – Part 1: General £ 44.00

BS EN ISO 19953: 2004 – Footwear – Test methods for heels – Resistance to lateral impact £ 44.00

BS EN ISO 20344: 2004 – Personal protective equipment – Test methods for footwear £ 126.00

BS EN ISO 20346: 2004 – Personal protective equipment – Protective footwear £ 94.00

BS ISO 22877: 2004 – Castors and wheels – Vocabulary, symbols and multilingual terminology £ 114.00

BS EN 50350: 2004 – Charging control systems for household electric room heating of the storage type – Methods for measuring performance £ 80.00

BS EN 50377-6-2: 2004 – Connector sets and interconnect components to be used in optical fibre communication systems – Product specifications – Part 6-2: Type SC-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre £ 94.00

BS EN 50406-1: 2004 – End user multi-pair cables used in high bit rate telecommunication networks – Part 1: Aerial cables £ 56.00

BS EN 60372: 2004 – Locking devices for ball and socket couplings of string insulator units – Dimensions and tests £ 56.00

BS EN 60512-25-6: 2004 – Connectors for electronic equipment – Tests and measurements – Part 25-6: Test 25f: Eye pattern and jitter £ 56.00

BS EN 60684-3-165: 2004 – Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving £ 44.00

BS EN 60745-2-18: 2004 – Hand-held motor-operated electric tools – Safety – Part 2-18: Particular requirements of strapping tools £ 44.00

BS EN 60793-2-50: 2004 – Optical fibres – Part 2-50: Product specifications – Sectional specification for class B single-mode fibres £ 80.00

BS EN 60893-2: 2004 – Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 2: Methods of test £ 94.00

BS EN 62199: 2004 – Bushings for d.c. application £ 80.00

DIN EN 13848-1: 2004 – Railway applications – Track – Track geometry quality – Part 1: Characterization of track geometry EURO 102.30

DIN EN 771-5: 2004 – Specification for masonry units – Part 5: Manufactured stone masonry units EURO 102.30

DIN EN 12001: 2004 – Conveying, spraying and placing machines for concrete and mortar – Safety requirements EURO 142.80

DIN EN 12217: 2004 – Doors – Operating forces – Requirements and classification EURO 51.00

DIN EN 12629-5-1: 2004 – Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-1: Pipe making machines manufacturing in the vertical axis EURO 102.30

DIN EN 12629-5-2: 2004 – Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-2: Pipe making machines manufacturing in the horizontal axis EURO 72.70

DIN EN 12629-5-3: 2004 – Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-3: Pipe pre stressing machines EURO 80.60

DIN EN 12629-5-4: 2004 – Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-4: Concrete pipe coating machines EURO 72.70

DIN EN 13141-1: 2004 – Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 1: Externally and internally mounted air transfer devices EURO 102.30

DIN EN 13200-1: 2004 – Spectator facilities – Part 1: Layout criteria for spectator viewing area – Specification EURO 94.70

DIN EN 13465: 2004 – Ventilation for buildings – Calculation methods for the determination of air flow rates in dwellings EURO 123.30

DIN EN 13872: 2004 – Methods of test for smoothing and/or levelling compounds – Determination of shrinkage EURO 80.60

DIN EN 14617-2: 2004 – Agglomerated stone – Test methods – Part 2: Determination of flexural strength (bending) EURO 72.70

DIN EN ISO 4126-1: 2004 – Safety devices for protection against excessive pressure – Part 1: Safety valves EURO 109.30

DIN EN ISO 4126-4: 2004 – Safety devices for protection against excessive pressure – Part 4: Pilot-operated safety valves EURO 116.00

DIN EN ISO 4126-6: 2004 – Safety devices for protection against excessive pressure – Part 6: Application, selection and installation of bursting disc safety devices EURO 130.10

DIN EN ISO 4126-7: 2004 – Safety devices for protection against excessive pressure – Part 7: Common data EURO 123.30

DIN EN ISO 5667-3: 2004 – Water quality – Sampling – Part 3: Guidance on the preservation and handling of water samples EURO 116.00

DIN EN ISO 6941: 2004 – Textile fabrics – Burning behaviour – Measurement of flame spread properties of vertically oriented specimens EURO 94.70

DIN EN ISO 9886: 2004 – Ergonomics – Evaluation of thermal strain by physiological measurements EURO 109.30

DIN EN 12873-1: 2004 – Influence of materials on water intended for human consumption – Influence due to migration – Part 1: Test method for non-metallic and non-cementitious factory-made products EURO 116.00

DIN EN 13076: 2004 – Devices to prevent pollution by backflow of potable water – Unrestricted air gap – Family A, type A EURO 72.70

DIN EN 13123-2: 2004 – Windows, doors and shutters – Explosion resistance – Requirements and classification – Part 2: Range test EURO 51.00

DIN EN 13124-2: 2004 – Windows, doors and shutters – Explosion resistance – Test method – Part 2: Range test EURO 87.90

DIN EN 13528-3: 2004 – Ambient air quality – Diffuse samplers for the determination of concentrations of gases and vapours – Part 3: Guide to selection, use and maintenance EURO 130.10

DIN EN 14325: 2004 – Protective clothing against chemicals – Test methods and performance classification of chemical protective clothing materials, seams, joints and assemblages EURO 94.70

DIN EN 14385: 2004 – Stationary source emissions – Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Ti and V EURO 123.30

DIN EN ISO 14698-1: 2004 – Clean rooms and associated controlled environments – Biocontamination control – Part 1: General principles and methods EURO 123.30

DIN EN ISO 16264: 2004 – Water quality – Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection EURO 80.60

DIN EN 14208: 2004 – Transportable gas cylinders – Specification for welded pressure drums up to 1 000 litre capacity for the transport of gases – Design and construction EURO 130.10

DIN EN ISO 12193: 2004 – Animal & vegetable fats and oils – Determination of lead by direct graphite furnace atomic absorption spectroscopy EURO 87.90

DIN EN 12331: 2004 – Food processing machinery – Mincing machines – Safety and hygiene requirements EURO 130.10

DIN EN ISO 14673-1: 2004 – Milk and milk products – Determination of nitrate and nitrite contents – Part 1: Method using cadmium reduction and spectrometry EURO 109.30

DIN EN ISO 14673-2: 2004 – Milk and milk products – Determination of nitrate and nitrite contents – Part 2: Method using segmented flow analysis (Routine method) EURO 109.30

DIN EN ISO 14673-3: 2004 – Milk and milk products – Determination of nitrate and nitrite contents – Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) EURO 102.30

DIN EN ISO 3766: 2004 – Construction drawings – Simplified representation of concrete reinforcement
Supersedes DIN ISO 3766 & DIN ISO 4066: 1996 Edns. EURO 116.00

DIN EN ISO 8980-1: 2004 – Ophthalmic optics – Uncut finished spectacle lenses – Part 1: Specifications for single-vision and multi focal lenses EURO 94.70

DIN EN ISO 8980-2: 2004 – Ophthalmic optics – Uncut finished spectacle lenses – Part 2: Specifications for progressive power lenses EURO 94.70

DIN EN ISO 9713: 2004 – Neurosurgical implants – Self-closing intracranial aneurysm clips EURO 87.90

DIN 2184-1: 2003 – Screwing taps and cold forming taps – Part 1: Basic dimensions of long shank taps EURO 65.60

DIN 2184-2: 2003 – Screwing taps and cold forming taps – Part 2: Basic dimensions of short shank taps EURO 65.60

DIN EN ISO 9018: 2004 – Destructive tests on welds in metallic materials – Tensile test on cruciform and lapped joints EURO 80.60

DIN EN 14612: 2004 – Space product assurance – Verification and approval of automatic machine wave soldering EURO 102.30

DIN 580: 2003 – Collar eyebolts for lifting purposes EURO 58.70

DIN 582: 2003 – Eyenuts for lifting purposes EURO 58.70

DIN EN ISO 7380: 2004 – Hexagon socket button head screws EURO 72.70

DIN EN ISO 23429: 2004 – Gauging of hexagon sockets EURO 65.60

DIN EN 13741: 2004 – Thermal performance acceptance testing of mechanical draught series wet cooling towers EURO 116.00

DIN EN ISO 8611-1: 2004 – Pallets for materials handling – Flat pallets – Part 1: Test methods EURO 123.30

DIN EN ISO 20623 – Petroleum and related products – Determination of the extreme-pressure and anti-wear properties of fluids – Four-ball method (European conditions) EURO 102.30

DIN EN ISO 20783-1: 2004 – Petroleum and related products – Determination of emulsion stability of fire-resistant fluids – Part 1: Fluids in category HFAE EURO 80.60

DIN EN ISO 20783-2: 2004 – Petroleum and related products – Determination of emulsion stability of fire-resistant fluids – Part 2: Fluids in category HFB EURO 94.70

DIN EN ISO 20843: 2004 – Petroleum and related products – Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC EURO 72.70

DIN 51517-1: 2004 – Type C lubricating oils – Requirements and testing EURO 58.70

DIN 51517-2: 2004 – Type CL lubricating oils – Requirements and testing EURO 65.60

DIN 51517-3: 2004 – Type CLP lubricating oils – Requirements and testing EURO 65.60

DIN 51603-1: 2003 – Type EL Fuel oils – Requirements and testing EURO 58.70

DIN 52025: 2004 – Determining the Kraemer-Sarnow softening point of fusible carbonaceous materials EURO 65.60

DIN EN ISO 2580-2: 2004 – Plastics – Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties EURO 87.90

DIN EN 14504: 2004 – Inland navigation vessels – Floating landing stages – Requirements, tests EURO 94.70

DIN EN 14413-2: 2004 – Recreational diving services – Safety-related minimum requirements for the training of scuba instructors – Part 2: Level 2 EURO 80.60

DIN EN 14278-2: 2004 – Textiles – Determination of cotton fibre stickiness – Part 2: Method using an automatic thermo detection plate device EURO 72.70

DIN EN 14278-3: 2004 – Textiles – Determination of cotton fibre stickiness – Part 3: Method using an automatic thermo detection rotating drum device EURO 72.70

DIN EN 12369-2: 2004 – Wood-based panels – Characteristic values for structural design – Part 2: Plywood EURO 65.60

DIN EN 12965: 2004 – Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety EURO 94.70

DIN EN 13135-1: 2004 – Cranes – Safety – Design – Requirements for equipment – Part 1: Electrotechnical equipment EURO 109.30

DIN EN ISO 15831: 2004 – Clothing – Physiological effects – Measurement of thermal insulation by means of a thermal manikin EURO 94.70

DIN 51083-8: 2003 – Determination of magnesium oxide in fine ceramic aluminosilicates by atomic absorption spectrometry EURO 58.70

IEC 60317-15 Ed. 3.0 (2004-08) - Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180
Specifies the requirements of enamelled round aluminium winding wire of class 180 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. Class 180 is a thermal class that requires a minimum temperature index of 180 and a heat shock temperature of at least 200 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor diameters covered by this standard is as follows:
- grade 1: 0,400 mm up to and including 1,600 mm;
- grade 2: 0,400 mm up to and including 5,000 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-3. The main changes with respect to the previous edition are listed below:
- new requirements for appearance, Subclause 3.2, added;
- springiness test, Clause 7, determined to be inappropriate;
- cut-through test, Clause 10, determined to be inappropriate;
- high temperature failure test, Clause 22, deleted;
- new pin hole test, Clause 23, added. SFr. 41.00

IEC 60317-18 Ed. 3.0 (2004-08) -Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
Specifies the requirements of enamelled rectangular copper winding wire of class 120 with a sole coating based on polyvinyl acetal resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. Class 120 is a thermal class that requires a minimum temperature index of 120 and a heat shock temperature of at least 155 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor dimensions covered by this standard is as follows:
- width:maximum 16,0 mm;
- thickness:maximum 5,60 mm.
Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified ratio width/ thickness are given in IEC 60317-0-2. The main changes with respect to the previous edition are listed below:
- new requirements for appearance, Subclause 3.2, added;
- new pin hole test, Clause 23, added. SFr. 41.00

IEC 60317-22 Ed. 3.0 (2004-08) - Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
Specifies the requirements of enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide resin. Class 180 is a thermal class that requires a minimum temperature index of 180 and a heat shock temperature of at least 200°C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor diameters covered by this standard is as follows:
- grade 1: 0,050 mm up to and including 3,150 mm;
- grade 2: 0,050 mm up to and including 5,000 mm;
- grade 3: 0,250 mm up to and including 1,600 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1. The main changes with respect to the previous edition are listed below:
- new requirements for appearance, Subclause 3.2, added;
- breakdown voltage values, former Table 3, replaced with a reference to IEC 60317-0-1;
- new pin hole test, Clause 23, added. SFr. 41.00

IEC 60317-3 Ed. 3.0 (2004-08) - Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155
Specifies the requirements of enamelled round copper winding wire of class 155 with a sole coating based on polyester resin, which may be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements. Class 155 is a thermal class that requires a minimum temperature index of 155 and a heat shock temperature of at least 175 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor diameters covered by this standard is as follows:
- grade 1: 0,020 mm up to and including 3,150 mm;
- grade 2: 0,020 mm up to and including 5,000 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1. The main changes with respect to the previous edition are listed below:
- new requirements for appearance, Subclause 3.2, added;
- the constant K, applied in calculating the number of revolutions for the peel test, Clause 8, increased from 130 mm to 150 mm;
- the test temperature for the cut-through test, Clause 10, increased from 240 °C to 270 °C;

• new pin hole test, Clause 23, added. SFr. 41.00

IEC 60921 Ed. 2.0 (2004-08) - Ballasts for tubular fluorescent lamps - Performance requirements
This standard specifies performance requirements for ballasts excluding resistance types for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with tubular fluorescent lamps with pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and characteristics as specified in IEC 60081 and 60901. It applies to complete ballasts and their component parts such as resistors, transformers and capacitors. SFr. 119.00

IEC 61241-18 Ed. 1.0 (2004-08) - Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation 'mD'
Applicable to electrical apparatus protected by encapsulation type of protection "mD" and surface temperature limitation for use in areas where combustible dust may be present in quantities which could lead to a fire or explosion hazard. Specifies requirements for design, construction and testing of electrical apparatus, parts of electrical apparatus and Ex components where the rated voltage does not exceed 10 kV. The application of electrical apparatus in atmospheres which may contain explosive gas as well as combustible dust, whether simultaneously or separately, requires additional protective measures. SFr. 119.00

IEC 61543 Amd.1 Ed. 1.0 (2004-08) - Amendment 1 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility SFr. 33.00

IEC 61800-3 Ed. 2.0 (2004-08) - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
Specifies electromagnetic compatibility (EMC) requirements for power drive systems (PDSs). A PDS is defined in 3.1. These are adjustable speed a.c. or d.c. motor drives. Requirements are stated for PDSs with converter input and/or output voltages (line-to-line voltage), up to 35 kV a.c. r.m.s. SFr. 249.00

IEC 61857-21 Ed. 2.0 (2004-08) - Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications
Describes a general-purpose model (GPM) and a tall channel alternative model (GPM-TC) which can be used for the evaluation of wire-wound EIS where specific electrotechnical products are not available or required. This edition constitutes a technical revision by merging Part 23 into Part 21. SFr. 59.00

IEC 60297-3-101 Ed. 1.0 (2004-08) - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units
Covers the basic dimensional relationship of a modular range of subracks and associated plug-in units in compliance with the IEC 60297 series. Specifies dimensions which will ensure dimensional interchangeability of subracks and associated plug-in units. SFr. 89.00

IEC 60297-3-102 Ed. 1.0 (2004-08) - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-102: Injector/extractor handle
Covers only the additional interface dimensions for injector/extractor devices used with subracks and plug-in units according to IEC 60297-3-101. May also be used in conjunction with IEC 60297-3-103. SFr. 53.00

IEC 60297-3-103 Ed. 1.0 (2004-08) - Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin
Covers only the additional interface dimensions for an alignment pin and a keying device used with subracks and plug-in units according to IEC 60297-3-101. May also be used in conjunction with IEC 60297-3-102. SFr. 65.00

IEC 60368-1 Amd.1 Ed. 4.0 (2004-08) - Amendment 1 - Piezoelectric filters of assessed quality - Part 1: Generic specification SFr. 37.00

IEC 62152 Ed. 1.0 (2004-08) - Background of terms and definitions of cascaded two-ports
Lays the foundation for agreement on the fundamental terms and definitions to be used world wide in describing the transmission properties of a two-port or quadripole end and builds a bridge between the classical quadripole theory and the scattering matrix presentation which is based on incident and reflecting square root of power waves at the input and output of a two-port. SFr. 149.00

IEC 62282-2 Ed. 1.0 (2004-07) - Fuel cell technologies - Part 2: Fuel cell modules
Provides the minimum requirements for safety and performance of fuel cell modules. Applies to fuel cell modules with the following electrolyte chemistry: alkaline; proton exchange membrane (including direct methanol fuel cells); phosphoric acid; molten carbonate; solid oxide fuel cell modules. SFr. 129.00

IEC 60335-2-2 Amd.1 Ed. 5.0 (2004-08) - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances SFr. 21.00

IEC 60335-2-21 Amd.1 Ed. 5.0 (2004-08) - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters SFr. 22.00

IEC 61817 Amd.1 Ed. 1.0 (2004-08) - Amendment 1 - Household portable appliances for cooking, grilling and similar use - Methods for measuring performance SFr. 29.00

IEC 61883-4 Ed. 2.0 (2004-08) - Consumer audio/video equipment - Digital interface - Part 4: MPEG2-TS data transmission
Describes the packetization and the transmission timing for MPEG2 transport streams for the IEEE 1394 digital interface. It describes the specifications for the IEEE 1394 packet, the CIP header and the transmission timing for use with the transport stream as specified in prETS 300 468. This explanation is based on the transport stream as specified in DVB. SFr. 53.00

IEC 60974-10 Amd.1 Ed. 1.0 (2004-08) - Amendment 1 - Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements SFr. 21.00

IEC 62380 Ed. 1.0 (2004-08) - Reliability data handbook - Universal model for reliability prediction of electronics components, PCBs and equipment
Provides elements to calculate the failure rate of mounted electronic components. It makes equipment reliability optimization studies easier to carry out, thanks to the introduction of influence factors. SFr. 229.00

IEC 61223-3-5 Ed. 1.0 (2004-08) - Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment
This standard
- defines the essential parameters which describe the performance of the CT scanners with regard to image quality, patient dose and positioning;
- defines the methods of testing the essential parameters;- evaluates compliance with the tolerances of the parameters specified by the accompanying documents.
These methods rely mainly on non-invasive measurements, using appropriate test equipment, performed during the installation or after it has been completed. Signed statements covering steps in the installation procedure may be used as part of the acceptance test report. This part of IEC 61223 is intended to assist in performing the acceptance tests on a CT scanner. The aim is to verify compliance of the installation with specifications affecting the image quality, patient dose and positioning. SFr. 119.00

IEC 60601-2-37 Amd.1 Ed. 1.0 (2004-08) -Amendment 1 - Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment SFr. 59.00

CISPR 29 Ed. 1.0 (2004-08) - Television broadcast receivers and associated equipment - Immunity characteristics - Methods of objective picture assessment
This Technical Report describes the algorithms used for objective picture assessment in immunity tests of analogue and digital TV broadcast receivers and associated equipment. SFr. 49.00

IEC 61300-2-5 Ed. 2.0 (2004-08) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion/Twist
Establishes a test to determine the ability of the cable attachment element of the device under test to withstand torsional loads, as might be experienced during installation and normal service, while under tension. The scope of the test also includes those elements designed for ribbon cables. SFr. 33.00

IEC 60050-141 Ed. 1.0 (2004-08) - International Electrotechnical Vocabulary - Part 141: Polyphase systems and circuits
Gives the general terminology used in polyphase circuits and systems. SFr. 109.00

IEC 60050-826 Ed. 2.0 (2004-08) - International Electrotechnical Vocabulary - Part 826: Electrical installations
Deals with electrical installations such as those of residential, industrial or commercial premises. SFr. 199.00

ISO 10075-3: 2004 – Ergonomic principles related to mental workload – Part 3: Principles and requirements concerning methods for measuring and assessing mental workload SFr. 79.00

ISO 15648: 2004 – Butter –Determination of salt content – Potentiometric method SFr. 54.00

ISO 21528-1: 2004 – Microbiology of food and animal fedding stuffs – Horizontal methods for the detection and enumeration of enterobacteriaceae – Part 1: Detection and enumeration by MPN technique with pre-enrichment SFr. 67.00

ISO 21528-2: 2004 – Microbiology of food and animal fedding stuffs – Horizontal methods for the detection and enumeration of enterobacteriaceae – Part 2: Colony-count method SFr. 61.00

ISO 19125-2: 2004 – Geographic information – Simple feature access – Part 2: SQL option SFr. 158.00

ISO/IEC TR 24704: 2004 – Information technology – Customer premises cabling for wireless access points SFr. 67.00

ISO 13347-2: 2004 – Industrial fans – Determination of fan sound power levels under standardized laboratory conditions – Part 2: Reverberant room method SFr. 97.00

ISO 13347-3: 2004 – Industrial fans – Determination of fan sound power levels under standardized laboratory conditions – Part 3: Enveloping surface methods SFr. 97.00

ISO 13347-4: 2004 – Industrial fans – Determination of fan sound power levels under standardized laboratory conditions – Part 4: Sound intensity method SFr. 104.00

ISO 19819: 2004 – Metallic materials – Tensile testing in liquid helium SFr. 67.00

ISO 15064: 2004 – Plastics – Aromatic isocyanates for use in the production of polyurethanes – Determination of the isomer ratio in toluenediisocyanate SFr. 61.00

ISO 16844-5: 2004 – Road vehicles – Tachograph systems – Part 5: Secured CAN interface SFr. 47.00

ISO 16844-6: 2004 – Road vehicles – Tachograph systems – Part 6: Diagnostics SFr. 79.00

ISO 16844-7: 2004 – Road vehicles – Tachograph systems – Part 7: Parameters SFr. 122.00

ISO 11726: 2004 – Solid mineral fuels – Guidelines for the validation of alternative methods of analysis SFr. 104.00

ISO 9328-4: 2004 – Steel flat products for pressure purposes – Technical delivery conditions – Part 4: Nickel-alloy steels with specified low temperature properties SFr. 73.00

ISO 9328-5: 2004 – Steel flat products for pressure purposes – Technical delivery conditions – Part 5: Weldable fine grain steels, thermomechanically rolled SFr. 79.00

ISO 9328-6: 2004 – Steel flat products for pressure purposes – Technical delivery conditions – Part 6: Weldable fine grain steels, quenched and tempered SFr. 73.00

ISO 8536-8: 2004 – Infusion equipment for medical use – Part 8: Infusion equipment for use with pressure infusion apparatus SFr. 67.00

Amendment No. 1 to ISO 5599-2: 2004 – Pneumatic fluid power – Five-port directional control valves – Part 2: Mounting interface surfaces with optional electrical connector SFr. 15.00

ISO 7369: 2004 – Pipework – Metal hoses and hose assemblies – Vocabulary SFr. 79.00

ISO 10497: 2004 – Testing of valves – Fire type-testing requirements SFr. 79.00

ISO 11223: 2004 – Petroleum and liquid petroleum products – Direct static measurements – Measurement of content of vertical storage tanks by hydrostatic tank gauging SFr. 150.00

ISO 14560: 2004 – Acceptance sampling procedures by attributes – specified quality levels in nonconforming items per million SFr. 91.00

ISO 14644-5: 2004 – Cleanrooms and associated controlled environments – Part 5: Operations SFr. 134.00

ISO 15609-5: 2004 – Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 5: Resistance welding SFr. 67.00

ISO 15864: 2004 – Space systems – General test methods for space craft, subsystems and units SFr. 116.00

ISO/TR 15931: 2004 – Designation system for cast irons and pig irons SFr. 61.00

JIS B 8266: 2003 – Alternative standard for construction of pressure vessels ¥ 66,300

JIS B 8274: 2003 (R) – Flat tubesheet for pressure vessels ¥ 6,000

JIS B 8277: 2003 (R) – Expansion joint for pressure vessels ¥ 6,300

JIS B 8278: 2003 (R) – Saddle supported horizontal pressure vessels ¥ 3,200

JIS B 8279: 2003 (R) – Jacket for pressure vessels ¥ 6,000

JIS B 8280: 2003 (R) – Pressure vessels of noncircular cross section ¥ 7,200

JIS B 8284: 2003 (R) – Quick closure for pressure vessels ¥ 9,000

JIS B 8285: 2003 (R) – Welding procedure qualification test for pressure vessels ¥ 8,700

JIS C 6691: 2003 (R) – Thermal-links – Requirements and application guide ¥ 6,000

JIS H 9303: 2004 – Recommended practice for cement sprayed coatings ¥ 3,200

JIS K 0306: 2004 – Measuring Method for volatile organic compounds in airborne by gas detector tube ¥ 2,800

JIS R 5210: 2003 (R) – Portland cement ¥ 3,600

JIS R 5211: 2003 (R) – Portland blast-furnace slag cement ¥ 2,400

JIS S 2303: 2003 (R) – Method of impact test for carbonated beverage bottles ¥ 2,000

JIS S 3024: 2004 (R) – Oil burning water heaters for domestic use ¥ 6,000

JIS T 0111-2: 1997 – Prosthetics – Structural testing of lower-limb prostheses – Part 2: Test samples ¥ 2,800

JIS T 0111-3: 1997 – Prosthetics – Structural testing of lower-limb