ASTM A 53/A 53M-04a, Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated, Welded and Seamless (R)

ASTM A 106/A 106M-04b, Specification for Seamless Carbon Steel Pipe for High-temperature Service (R)

ASTM A 350/A 350M-04a, Specification for Carbon and Low-alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components (R)

ASTM A 376/A 376M-04, Specification for Seamless Austenitic Steel Pipe for High-temperature Central-station Service (R)

ASTM A 213/A 213M-04b, Specification for Seamless Ferritic and Austenitic Alloy-steel Boiler, Superheater, and Heat-exchanger Tubes (R)

ASTM A 216/A 216M-04, Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service (R)

ASTM A 217/A 217M-04, Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service (R)

ASTM A 356/A 356M-04, Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines (R)

ASTM A 483-04, Specification for Silicomanganese (R)

ASTM A 568/A 568M-04, Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for (R)

ASTM A 353/A 353M-04, Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-normalized and Tempered (R)

ASTM A 844/A 844M-04, Specification for Steel Plates, 9 Nickel Alloy, for Pressure Vessels, Produced by the Direct-quenching Process (R)

ASTM B 33-04, Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes (R)

ASTM B 787/B 787M-04, Specification for 19 Wire Combination Unilay-stranded Copper Conductors for Subsequent Insulation (R)

ASTM B 366-04b, Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings (R)

ASTM B 407-04, Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube (R)

ASTM B 472-04a, Specification for Nickel Alloy Billets and Bars for Reforging (R)

ASTM B 622-04a, Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube (R)

ASTM B 591-04, Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar (R)

ASTM B 763-04, Specification for Copper Alloy Sand Castings for Valve Applications (R)

ASTM E 252-04, Test Method for Thickness of Thin Foil and Film by Mass Measurement (R)

ASTM B 317/B 317M-04, Specification for Aluminum-alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles for Electrical Purposes Bus Conductor (R)

ASTM B 243-04b, Terminology of Powder Metallurgy (R)

ASTM C 1513-04, Specification for Steel Tapping Screws for Cold-formed Steel Framing Connections (R)

ASTM C 1340-04, Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program (R)

ASTM C 1549-04, Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer (R)

ASTM C 1559-04 (Includes Change to Title), Test Method for Determining Wicking of Fibrous Glass Blanket Insulation Aircraft Type (R)

ASTM D 524-04, Test Method for Ramsbottom Carbon Residue of Petroleum Products (R)

ASTM D 974-04, Test Method for Acid and Base Number by Color-indicator Titration (R)

ASTM D 1265-04a, Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method (R)

ASTM D 2068-04, Test Method for Filter Plugging Tendency of Distillate Fuel Oils (R)

ASTM D 3339-04, Test Method for Acid Number of Petroleum Products by Semi-micro Color Indicator Titration (R)

ASTM D 246-04a, Test Method for Distillation of Creosote and Creosote-coal Tar Solutions (R)

ASTM D 5457-04a, Specification for Computing Reference Resistance of Wood-based Materials and Structural Connections for Load and Resistance Factor Design (R)

ASTM D 5869-04a, Practice for Dark Oven Heat Exposure of Bituminous Materials (R)

ASTM D 6757-04a (Includes Change to Title), Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing (R)

ASTM D 2860/D 2860M-04, Test Method for Adhesion of Pressure-sensitive Tape to Fiberboard at 90° Angle and Constant Stress (R)

ASTM D 3330/D 3330M-04, Test Method for Peel Adhesion of Pressure-sensitive Tape (R)

ASTM D 4169-04a, Practice for Performance Testing of Shipping Containers and Systems (R)

ASTM D 5330/D 5330M-04, Specification for Pressure-sensitive Tape for Packaging, Filament-reinforced (R)

ASTM D 5486/D 5486M-04, Specification for Pressure-sensitive Tape for Packaging, Box Closure, and Sealing (R)

ASTM D 1871-04, Test Method for Adhesion Between Tire Bead Wire and Rubber (R)

ASTM D 2229-04, Test Method for Adhesion Between Steel Tire Cords and Rubber (R)

ASTM D 2692-04, Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns (R)

ASTM D 2969-04, Test Methods for Steel Tire Cords (R)

ASTM D 2970/D 2970M-04, Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made from Glass Filaments (R)

ASTM D 4393-04, Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds (R)

ASTM D 4776-04, Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-test Procedure (R)

ASTM D 4974-04, Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven (R)

ASTM D 4975-04, Test Methods for Single-filament Tire Bead Wire Made from Steel (R)

ASTM D 5591-04, Test Method for Thermal Shrinkage Force of Yarn and Cord with a Thermal Shrinkage Force Tester (R)

ASTM D 6320-04, Test Methods for Single Filament Hose Reinforcing Wire Made from Steel (R)

ASTM D 6477-04, Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics (R)

ASTM D 1384-04, Test Method for Corrosion Test for Engine Coolants in Glassware (R)

ASTM D 653-04, Terminology Relating to Soil, Rock, and Contained Fluids (R)

ASTM D 1238-04b, Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer (R)

ASTM D 1621-04a, Test Method for Compressive Properties of Rigid Cellular Plastics (R)

ASTM D 1709-04, Test Methods for Impact Resistance of Plastic Film by the Free-falling Dart Method (R)

ASTM D 2673-04, Specification for Oriented Polypropylene Film (R)

ASTM D 3895-04, Test Method for Oxidative-induction Time of Polyolefins by Differential Scanning Calorimetry (R)

ASTM D 3965-04, Specification for Rigid Acrylonitrile-butadiene-styrene (ABS) Materials for Pipe and Fittings (R)

ASTM D 4634-04, Specification for Styrene-maleic Anhydride Materials (S/ma) (R)

ASTM D 5523-04, Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates (R)

ASTM D 6400-04, Specification for Compostable Plastics (R)

ASTM D 5926-04, Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems (R)

ASTM D 5578-04, Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBR Derivatization Method) (R)

ASTM D 3849-04, Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy (R)

ASTM D 6556-04, Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption (R)

ASTM E 2394-04, Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products

ASTM E 72-04, Test Methods of Conducting Strength Tests of Panels for Building Construction (R)

ASTM E 833-04, Terminology of Building Economics (R)

ASTM E 1057-04, Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems (R)

ASTM E 874-04, Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels (R)

ASTM E 1509-04, Specification for Room Heaters, Pellet Fuel-burning Type E 1644-04, Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead (R)

ASTM E 1979-04 (Includes Change to Title), Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead (R)

ASTM E 2136-04, Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—durability (R)

ASTM E 2150-04, Classification for Life-cycle Environmental Work Elements —environmental Cost Element Structure (R)

ASTM E 2156-04, Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-family Attached and Detached Dwellings (R)

ASTM E 2174-04, Practice for On-site Inspection of Installed Fire Stops (R)

ASTM E 2267-04, Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—indoor Air Quality (R)

ASTM E 2351-04a, Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality (R)

ASTM E 1925-04, Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures (R)

ASTM E 606-04, Practice for Strain-controlled Fatigue Testing (R)

ASTM E 1064-04a, Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration (R)

ASTM E 2193-04, Test Method for Ultraviolet Transmittance of Monoethylene Glycol Ultraviolet Spectrophotometric Method (R)

ASTM E 2313-04 (Includes Change to Title), Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol Spectrophotometric Method (R)

ASTM E 1885-04, Test Method for Sensory Analysis –Triangle Test (R)

ASTM E 2407-04, Test Method for Effectiveness of Defoaming Agents

ASTM E 2408-04, Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes

ASTM E 2362-04, Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection

ASTM E 1482-04, Test Method for Neutralization of Virucidal Agents in Virucidal Efficacy Evaluations (R)

ASTM E 1910-04 (Includes Change to Title), Test Method for Agricultural pH Control Agents (R)

ASTM F 648-04, Specification for Ultra-High-Molecular Weight Polyethylene Powder and Fabricated Form for Surgical Implants (R)

ASTM F 746-04, Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials (R)

ASTM F 1635-04a, Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants (R)

ASTM F 2083-04, Specification for Total Knee Prosthesis (R)

ASTM F 2211-04, Classification for Tissue Engineered Medical Products (TEMPs) (R)

ASTM F 1818-04, Specification for Foot Protection for Chain Saw Users (R)

ASTM F 1897-04, Specification for Leg Protection for Chain Saw Users (R)

ASTM F 939-04, Practice for Selection of Release Torque Values for Alpine Ski Bindings (R)

ASTM F 2431-04, Specification for Ring Bearing, Inner: for Needle Roller Bearing with Thick Outer Ring

PD ISO/IEC Guide 67: 2004 – Conformity assessment – Fundamentals of product certification
£ 60.00

BS ISO 129-1: 2004 – Technical drawings – Indication of dimensions and tolerances – Part 1: General principals £100.00

BS EN ISO 340: 2004 – Conveyor belts – Laboratory scale flammability characteristics – Requirements and test method £ 60.00

BS EN ISO 376: 2004 – Metallic materials – Calibration of force-proving instruments used for the verification of uniaxial testing machines £ 86.00

BS EN 520: 2004 – Gypsum plasterboards – Definitions, requirements and test methods £ 122.00

BS EN 573-1: 2004 – Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 1: Numerical designation system £ 48.00

BS EN 748: 2004 – Playing field equipment – Football goals – Functional and safety requirements, test methods £ 60.00

BS EN 750: 2004 – Playing field equipment – Hockey goals – Functional and safety requirements, test methods £ 48.00

BS ISO 806: 2004 – Aluminium oxide primarily used for the production of aluminium – Determination of loss of mass at 300 ° C and 1 000 ° C £ 60.00

BS EN 885: 2004 – Chemicals used for treatment of water intended for human consumption – Polyaluminium chloride hydroxide silicate £ 60.00

BS EN 886: 2004 – Chemicals used for treatment of water intended for human consumption – Polyaluminium hydroxide silicate sulfate £ 60.00

BS EN 887: 2004 – Chemicals used for treatment of water intended for human consumption – Aluminium iron (III) sulfate £ 60.00

BS EN 888: 2004 – Chemicals used for treatment of water intended for human consumption – Iron (III) chloride £ 100.00

BS EN 889: 2004 – Chemicals used for treatment of water intended for human consumption – Iron (II) sulfate £ 100.00

BS EN 890: 2004 – Chemical used for treatment of water intended for human consumption – Iron (III) sulfate liquid £ 100.00

BS EN 1011-8: 2004 – Welding – Recommendations for welding of metallic materials – Part 8: Welding of cast irons £ 86.00

BS EN ISO 1181: 2004 – Fibre ropes – Manila and sisal – 3-, 4- and 8-strand ropes £ 60.00

BS EN 1271: 2004 – Playing field equipment – Volleyball equipment – Functional and safety requirements, test methods £ 60.00

BS EN ISO 1346: 2004 – Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) – 3-, 4- and 8-strand ropes £ 60.00

BS EN 1365-6: 2004 – Fire resistance tests for loadbearing elements – Part 6: Stairs £ 60.00

BS EN 1366-6: 2004 – Fire resistance tests for service installations – Part 6: Raised access and hollow core floors £ 60.00

BS EN 1504-8: 2004 – Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 8: Quality control and evaluation of conformity £ 48.00

BS EN 1509: 2004 – Playing field equipment – Badminton equipment – Functional and safety requirements, test methods £ 48.00

BS EN 1510: 2004 – Playing field equipment – Tennis equipment – Functional and safety requirements, test methods £ 48.00

BS EN 1514-8: 2004 – Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 8: Polymeric O-Ring gaskets for grooved flanges £ 48.00

BS EN 13523-19: 2004 – Coil coated metals – Test methods – Part 19: Panel design and method of atmospheric exposure testing £ 60.00

BS EN 13523-20: 2004 – Coil coated metals – Test method – Part 20: Foam adhesion £ 48.00

BS EN 13523-24: 2004 – Coil coated metals –Test methods – Part 24: Resistance to blocking and pressure marking £ 48.00

BS ISO 13555-3: 2004 – Diesel engines – Procedure for checking the dynamic timing of diesel fuel injection equipment – Part 3: Validation of timing measurement devices £ 60.00

BS EN 13617-4: 2004 – Petrol filling stations – Part 4: Safety and environmental requirements for construction and performance of swivels for use on metering pumps and dispensers £ 60.00

BS EN 13742-1: 2004 – Irrigation technique – Solid set sprinkler systems – Part 1: Selection, design, planning and installation £ 60.00

BS EN 13742-2: 2004 – Irrigation technique – Solid set sprinkler systems – Part 2: Test methods £ 48.00

BS EN 13775-4: 2004 – Railway applications – Measuring of new and modified freight wagons – Part 4: Bogies with 2 wheelsets £ 100.00

BS EN 13863-4: 2004 – Concrete pavements – Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres £ 48.00

BS EN ISO 14001: 2004 – Environmental management systems – Requirements with guidance for use £ 96.00

BS ISO 14004: 2004 – Environmental management systems – General guidelines on principles, systems and support techniques £ 116.00

BS EN 14129: 2004 – Pressure relief valves for LPG tanks £ 60.00

BS EN 14258: 2004 – Structural adhesives – Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature £ 48.00

BS EN 14291: 2004 – Foam producing solutions for leak detection on gas installations £ 48.00

BS EN 14344: 2004 – Child use and care articles – Child seats for cycles – Safety requirements and test methods £ 100.00

BS EN 14350-1: 2004 – Child use and care articles – Drinking equipment – Part 1: General and mechanical requirements and tests £ 86.00

BS EN 14350-2: 2004 – Child use and care articles – Drinking equipment – Part 2: Chemical requirements and tests £ 86.00

BS EN 14366: 2004 – Laboratory measurement of noise from waste water installations £ 86.00

BS EN 14370: 2004 – Surface active agents – Determination of surface tension £ 60.00

BS EN 14372: 2004 – Child use and care articles – Cutlery and feeding utensils – Safety requirements and tests £ 86.00

BS EN 14499: 2004 – Textile floor coverings – Minimum requirements for carpet underlays £ 48.00

BS EN 14602: 2004 – Footwear – Test methods for the assessment of ecological criteria £ 60.00

BS EN 14610: 2004 – Welding and allied processes – Definitions of metal welding processes £ 134.00

BS EN 14664: 2004 – Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate, solid £ 100.00

BS EN 14684: 2004 – Polyester fibre ropes – Double braid construction £ 48.00

BS EN 14685: 2004 – Polyamide fibre ropes – Double braid construction £ 48.00

BS EN 14687: 2004 – Mixed polyolefin fibre ropes £ 48.00

DD CEN/TS 14751: 2004 – Welding – Use of time-of-flight diffraction technique (TOFD) for examination of welds £ 60.00

PD CEN/TR 14819-1: 2004 – Safety recommendations for cableway installations designed to carry persons – Prevention and fight against fire – Part 1: Funicular railways in tunnels £ 86.00

DD CEN/TS 14826: 2004 – Postal services – Automatic identification of items –Two dimensional bar code symbol print quality specification for machine readable Digital – Postage Marks £ 60.00

BS EN ISO 15187: 2002 – Manipulating industrial robots – Graphical user interfaces for programming and operation of robots (GUI-R) £ 100.00

BS ISO/IEC 15504-1: 2004 – Information technology – Process assessment – Part 1: Concepts and vocabulary £ 86.00

BS ISO 15552: 2004 – Pneumatic fluid power – Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm – Basic, mounting and accessories dimensions £ 86.00

BS ISO 15825: 2004 – Rubber compounding ingredients – Carbon black – Determination of aggregate size distribution by disc centrifuge photosedimentometry £ 48.00

BS ISO 15838: 2003 – Ships and marine technology – Fittings for use with gasketed mechanical couplings used in piping applications – Performance specification £ 48.00

BS ISO 15885: 2002 – Milk fat – Determination of the fatty acid composition by gas-liquid chromatography £ 60.00

BS ISO 15886-3: 2004 – Agricultural irrigation equipment – Part 3: Sprinklers – Characterization of distribution and test methods £ 60.00

BS ISO/IEC 15961: 2004 – Information technology – Radio frequency identification (RFID) for item management – Data protocol: application interface £ 134.00

BS ISO/IEC 15962: 2004 – Information technology – Radio frequency identification (RFID) for item management – Data protocol: data encoding rules and logical memory functions £ 134.00

BS ISO 16200-1: 2001 – Workplace air quality – Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography – Part 1: Pumped sampling method £ 100.00

BS ISO 16200-2: 2000 – Workplace air quality – Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography – Part 2: Diffusive sampling method £ 100.00

BS ISO 16656: 2004 – Hydraulic fluid power – Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) – Mounting dimensions £ 48.00

BS ISO 16703: 2004 – Soil quality – Determination of content of hydrocarbon in the range C₁₀ to C₄₀ by gas chromatography £ 86.00

BS EN ISO/IEC 17000: 2004 – Conformity assessment – Vocabulary and general principles £ 122.00

BS ISO 17058: 2004 – Steel and iron – Determination of arsenic content – Spectrophotometric method £ 60.00

BS ISO 17081: 2004 – Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique £ 86.00

BS ISO 17240: 2004 – Fruit and vegetable products – Determination of tin content – Method using flame atomic absorption spectrometry £ 48.00

BS EN ISO 17294-1: 2004 – Water quality – Application of inductively coupled plasma mass spectrometry (ICP-MS) – Part 1: General guidelines £ 86.00

BS EN ISO 17294-2: 2004 – Water quality – Application of inductively coupled plasma mass spectrometry (ICP-MS) – Determination of 62 elements £ 86.00

DIN EN 12697-17: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 17: Particle loss of porous asphalt specimen EURO 59.90

DIN EN 12697-19: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 19: Permeability of specimen EURO 66.90

DIN EN 12697-31: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 31: Specimen preparation by gyratory compactor EURO 89.70

DIN EN 12697-34: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 34: Marshall test EURO 74.20

DIN EN 12812: 2004 – Falsework – Performance requirements and general design
Supersedes DIN 4421: 1982 Edn. EURO 132.70

DIN EN 12813: 2004 – Temporary works equipment – Loadbearing towers of prefabricated components – Particular methods of structural design EURO 89.70

DIN EN 13055-2: 2004 – Lightweight aggregates – Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications EURO 132.70

DIN EN 13141-2: 2004 – Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 2: Exhaust and supply air terminal devices
Supersedes DIN 4797: 1986 Edn. EURO 104.30

DIN EN 13369: 2004 – Common rules for precast concrete products EURO159.40

DIN EN 13561: 2004 – External blinds – Performance requirements including safety EURO 132.70

DIN EN ISO 13790: 2004 – Thermal performance of buildings – Calculation of energy use for space heating
This standard, together with DIN EN 832: 2003 Edn., supersedes DIN EN 832: 1998 Edn. EURO 167.20

DIN EN 14019: 2004 – Curtain walling – Impact resistance – Performance requirements EURO 59.90

DIN EN 12235: 2004 – Surfaces for sports areas – Determination of vertical ball behaviour EURO 59.90

DIN EN 13864: 2004 – Surfaces for sports areas – Determination of tensile strength of synthetic yarns EURO 66.90

DIN EN 1300: 2004 – Secure storage units – Classification for high security locks according to their resistance to unauthorized opening
Supersedes DIN V ENV 1300: 1999 Edn. EURO 125.80

DIN EN 1366-7: 2004 – Fire resistance tests for service installations – Part 7: Conveyor systems and their closures EURO 145.70

DIN EN ISO 6878: 2004 – Water quality – Determination of phosphorus – Ammonium molybdate spectrometric method
Supersedes DIN EN 1189: 1996 Edn. EURO 89.70

DIN EN 12697-24: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 24: Resistance to fatigue EURO 145.70

DIN EN 12697-30: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 30: Specimen preparation by impact compactor EURO 89.70

DIN EN 13374: 2004 – Temporary edge protection systems – Product specification and test methods EURO 111.50

DIN EN 14181: 2004 – Stationary source emissions – Quality assurance of automated measuring systems EURO 151.90

DIN EN 12560-7: 2004 – Flanges and their joints – Gaskets for class-designated flanges – Part 7: Covered metal jacketed gaskets for use with steel flanges EURO 96.60

DIN EN 13616: 2004 – Overfill prevention devices for static tanks for liquid petroleum fuels
EURO 159.40

DIN EN 13786: 2004 – Automatic changeover valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures EURO 241.30

DIN EN 14427: 2004 – Transportable refillable fully wrapped composite cylinders for liquefied petroleum gas (LPG) – Design and construction EURO 145.70

DIN EN 10168: 2004 – Steel products – Inspection documents – List of information and description EURO 82.20

DIN EN 13617-1: 2004 – Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units EURO 138.50

DIN EN 14227-2: 2004 – Hydraulically bound mixtures – Specifications – Part 2: Slag bound mixtures EURO 118.30

DIN EN 572-3: 2004 – Glass in building – Basic soda lime silicate glass products – Part 3: Polished wire glass EURO 66.90

DIN EN 572-4: 2004 – Glass in building – Basic soda lime silicate glass products – Part 4: Drawn sheet glass EURO 66.90

DIN EN 572-6: 2004 – Glass in building – Basic soda lime silicate glass products – Part 6: Wired patterned glass EURO 66.90

DIN EN 572-7: 2004 – Glass in building – Basic soda lime silicate glass products – Part 7: Wired or unwired channel shaped glass EURO 66.90

DIN EN 13035-4: 2004 – Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 4: Tilting tables EURO 89.70

DIN EN 1639: 2004 – Dentistry – Medical devices for dentistry – Instruments EURO 89.70

DIN EN 1640: 2004 – Dentistry – Medical devices for dentistry – Equipment EURO 82.20

DIN EN 1641: 2004 – Dentistry – Medical devices for dentistry – Materials EURO 74.20

DIN EN 1642: 2004 – Dentistry – Medical devices for dentistry – Dental implants EURO74.20

DIN EN ISO 6360-4: 2004 – Dentistry – Number coding system for rotary instruments – Part 4: Specific characteristics of diamond instruments
Supersedes parts of DIN EN 26360-2: 1991 Edn. EURO 66.90

DIN EN ISO 6360-6: 2004 – Dentistry – Number coding system for rotary instruments – Part 6: Specific characteristics of abrasive instruments
Supersedes parts of DIN EN 26360-2: 1991 Edn. EURO 82.20

DIN EN 13060: 2004 – Small steam sterilizers
This standard supersedes DIN 58946-8: 1986 Edn., and, together with DIN 58946-7: 2004 Edn., supersedes DIN 58946-5: 1987 Edn. EURO 182.10

DIN EN 13544-1: 2004 – Respiratory therapy equipment – Part 1: Nebulizing systems and their components EURO 145.70

DIN EN ISO 13897: 2004 – Dentistry – Amalgam capsules EURO 74.20

DIN EN ISO 16408: 2004 – Dentistry – Oral hygiene products – Oral rinses EURO 82.20

DIN EN 13705: 2004 – Welding of thermoplastics – Machines and equipment for hot gas welding (including extrusion welding) EURO 74.20

DIN EN ISO 15613: 2004 – Specification and qualification of welding procedures for metallic materials – Qualification based on pre-production welding test
Supersedes DIN EN 288-8: 1995 Edn. EURO 66.90

DIN EN 485-2: 2004 – Aluminum and aluminum alloys – Sheet, strip and plate – Part 2: Mechanical properties EURO 145.70

DIN EN 10223-2: 2004 – Steel wire and wire products for fences – Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes EURO 82.20

DIN EN 10326: 2004 – Continuously hot-dip coated strip and sheet of structural steels – Technical delivery conditions
Supersedes DIN EN 10147: 2000 Edn., and, together with DIN EN 10327: 2004 Edn., supersedes DIN EN 10154: 2002 Edn., and DIN EN 10214 and DIN EN 10215: 1995 Edns. EURO 104.30

DIN EN 10327: 2004 – Continuously hot-dip coated strip and sheet of low carbon steels for cold forming – Technical delivery conditions
Supersedes DIN EN 10142: 2000 Edn., and, together with DIN EN 10326: 2004 Edn., supersedes DIN EN 10154: 2002 Edn., and DIN EN 10214 and DIN EN 10215: 1995 Edns. EURO 111.50

DIN EN 13675: 2004 – Safety of machinery – Safety requirements for tube forming and rolling mills and their finishing line equipment EURO 145.70

DIN EN 14287: 2004 – Aluminium and aluminium alloys – Specific requirements on the chemical composition of products intended to the used for the manufacture of packaging and packaging components EURO 66.90

DIN EN ISO 7143: 2004 – Paints, varnishes and binders – Methods of test for characterizing water-based coating materials and binders
Supersedes DIN ISO 7143: 2000 Edn. EURO 66.90

DIN EN 12206-1: 2004 – Paints & varnishes – Coatings of aluminium and aluminium alloys for architectural purposes – Part 1: Coatings prepared from coating powder EURO 111.50

DIN EN ISO 15181-1: 2004 – Paints & varnishes – Determination of release rate of biocides from antifouling paints – Part 1: General method for extraction of biocides EURO 74.20

DIN EN ISO 15880: 2004 – Paints, varnishes and binders – Determination of MEQ value of water-based coating materials and binders
Supersedes DIN ISO 15880: 2002 Edn. EURO 66.90

DIN EN ISO 75-2: 2004 – Plastics – Determination of temperature of deflection under load – Part 2: Plastics and ebonite EURO 89.70

DIN EN ISO 75-3: 2004 – Plastics – Determination of temperature of deflection under load – Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics EURO 82.20

DIN EN ISO 11337: 2004 – Plastics – Polyamides – Determination of e-caprolactam and w -laurolactam by gas chromatography EURO 96.60

DIN EN ISO 15749-1: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 1: Sanitary drainage-system design
Supersedes DIN 86280-1: 1999 Edn. EURO 111.50

DIN EN ISO 15749-2: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 2: Sanitary drainage, drain piping for gravity systems
Supersedes DIN 86280-2: 1999 Edn. EURO 82.20

DIN EN ISO 15749-3: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 3: Sanitary drainage, drain piping for vacuum systems
Supersedes DIN 86280-3: 1999 Edn. EURO 111.50

DIN EN ISO 15749-4: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 4: Sanitary drainage, sewage disposal pipes
Supersedes DIN 86280-4: 1999 Edn. EURO 96.60

DIN EN ISO 15749-5: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 5: Drainage of decks, cargo spaces and swimming pools
Supersedes DIN 86280-5: 1999 Edn. EURO 82.20

DIN EN 13746: 2004 – Surfaces for sports areas – Determination of dimensional changes due to the effect of varied water, frost and heat conditions EURO 59.90

DIN EN ISO 15496: 2004 – Textiles – Measurement of water vapour permeability of textiles for the purpose of quality control EURO 89.70

DIN 53362: 2003 – Determining the flexural rigidity of plastic film and woven textile fabrics with or without plastic coating by the cantilever method EURO 66.90

DIN EN 878: 2004 – Chemicals used for treatment of water intended for human consumption –Aluminium sulfate EURO 96.60

DIN EN 975-2: 2004 – Sawn timber – Apperance grading of hardwoods – Part 2: Poplars EURO 59.90

DIN EN 1492-4: 2004 – Textile slings – Safety – Part 4: Lifting slings for general service made from natural and man-made fibre ropes
Supersedes DIN 83302: 1990 Edn. EURO 132.70

DIN EN 1501-1: 2004 – Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements – Part 1: Rear-end loaded refuse collection vehicles EURO 145.70

DIN EN ISO 5534: 2004 – Cheese and processed cheese – Determination of the total solids content (Reference method)
Supersedes DIN 10314: 1988 Edn. EURO 82.20

DIN EN 12952-14: 2004 – Water-tube boilers and auxiliary installations – Part 14: Requirements for flue gas DENOX systems using liquefied pressurized ammonia and ammonia water solution EURO 111.50

DIN EN 13684: 2004 – Garden equipment – Pedestrian controlled lawn aerators and scarifiers - Safety EURO 138.50

DIN EN 14736: 2004 – Space product assurance – Quality assurance fort test centres EURO 125.80

DIN EN ISO 17994: 2004 – Water quality – Criteria for establishing equivalence between microbiological methods EURO 96.60

DIN 53107: 2003 – Determining the smoothness of paper and board by the bekk method EURO 66.90

IEC 60825-12 Ed. 1.0 (2005-01) - Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
This part of IEC 60825 provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission. This standard only addresses the open beam portion of the system. If portions of the equipment or system incorporate optical fibre that extends from the confinements of the enclosure(s), the manufacturing and safety requirements under IEC 60825-1 apply to those portions only. This standard does not apply to systems designed for purposes of transmitting optical power for applications such as material processing or medical treatment. This standard also does not apply to the use of systems in explosive atmospheres. The objective of this part of IEC 60825 is to:
- provide information to protect people from potentially hazardous optical radiation produced by free space optical communication systems (FSOCS) by specifying engineering controls and requirements, administrative controls and work practices according to the degree of the hazard;
- specify requirements for manufacturing, installation, service and operating organisations in order to establish procedures and provide written information so that proper precautions can be adopted. SFr. 129.00

IEC 61249-2-1 Ed. 1.0 (2005-01) - Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad
This part of IEC 61249 gives requirements for properties of phenolic cellulose paper reinforced copper-clad laminated sheets, economic grade in thicknesses of 0,8 mm up to 3,2 mm. This standard covers materials with different requirements on flammability, designated according to the following: Material 61249-2-1-1: general purpose grade, requirement on flammability not specified; and Material 61249-2-1-2: materials of defined flammability (vertical burning test). These grades of material cover one of two flammability requirements, designated at FV0 or FV1. SFr. 59.00

IEC 61249-2-22 Ed. 1.0 (2005-01) - Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
This part of IEC 61249 gives requirements for properties of modified non-halogenated epoxide woven E-glass laminated sheet 0,05 mm up to 3,2 mm, of defined flammability (vertical burning test), copper-clad. The flammability rating is achieved through the use of phosphorus compounds and/or aluminium hydroxide fire retardants contained as part of the polymeric structure. The glass transition temperature is defined to be between 150 °C to 190 °C. SFr. 99.00

IEC 61249-2-23 Ed. 1.0 (2005-01) - Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad
This part of IEC 61249 gives requirements for properties of non-halogenated phenolic cellulose paper copper-clad laminated sheets, economic grade, in thicknesses of 0,8 mm up to 3,2 mm. This standard covers materials with different requirements on flammability and are designated according to the following: Material 61249-2-23-1: general purpose grade, requirement on flammability not specified; Material 61249-2-23-2: materials of defined flammability (vertical burning test). These grades of material provide for one of two flammability requirements and designated as FV0 or FV1 in Table 8. SFr. 73.00

IEC 61249-2-26 Ed. 1.0 (2005-01) - Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
This part of IEC 61249 gives requirements for properties of non-halogenated epoxide non-woven/woven reinforced E-glass laminated sheets of defined flammability (vertical burning test), copper-clad in thicknesses of 0,80 mm up to 1,60 mm. The flammability rating is achieved through the use of non-halogenated inorganic and/or organic compounds acting as fire retardants. These fire retardants are contained as part of polymeric structure or in addition to it. The glass transition temperature is defined to be 95 °C minimum. SFr. 89.00

IEC 60335-2-3 Ed. 5.1 (2005-01) - Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
Deals with the safety of electric dry irons and steam irons. It includes those with a separate water reservoir or boiler with a capacity less than 5 l. It covers household use, use by laymen in shops, in light industry and on farms. For ironers, see IEC 60335-2-44. SFr. 81.00

IEC 60335-2-60 Ed. 3.1 (2005-01) - Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas
Deals with the safety of electric whirlpool baths for indoor use, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard also applies to appliances for circulating air or water in conventional baths. Appliances not intended for normal household use, such as appliances intened to be used by layman in hotels, fitness centers and similar places, are within the scope of this standard. SFr. 65.00

IEC 60335-2-75 Ed. 2.1 (2005-01) - Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
Deals with the safety of electric commercial dispensing appliances and vending machines for preperation or delivery of food, drinks and consumer products, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Examples of appliances that are within the scope of this standard are bulk tea or coffee brewing machines, cigarette, hot and cold beverage, newspaper, audio or video tape or disc vending machines, ice cream, whipped cream and ice dispensers, commercial liquid heaters, espresso coffee appliances and packaged food and drink vending machines. SFr. 109.00

IEC 60335-2-79 Ed. 2.1 (2005-01) - Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
Deals with the safety of high pressure cleaners for household, industrial and commercial use having a pressure not less than 2,5 MPa and not more than 25 MPa and with an input to the drive for the high pressure pump not exceeding 10 kW, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. It also applies to industrial and commercial steam cleaners even if the pressure is less than 2,5 MPa. It is also applicable to appliances making use of other forms of energy for the motor, but it is necessary that their influence is taken into consideration. SFr. 119.00

IEC 60335-2-95 Ed. 2.1 (2005-01) - Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
Deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase and 480 V for other appliances. The hazards associated with the movement of these electrically driven garage doors is included. SFr. 89.00

IEC 60335-2-97 Ed. 2.1 (2005-01) - Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
Deals with the safety of electric drives for rolling equipment such as shutters, blinds, and awnings, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Examples of rolling equipment that can be driven are awnings; blinds; grilles; projection screens; shutters for doors and windows. Drives for equipment with a spring-controlled driven part, such as a folding arm awning, are also within the scope of this standard. SFr. 73.00

IEC 60335-2-98 Ed. 2.1 (2005-01) - Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
Deals with the safety of electric humidifiers for household and similar use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Examples of appliances that are within the scope of this standard are appliances that atomize water; appliances that evaporate water by heating and appliances that blow air through a moist element. SFr. 53.00

IEC 61477 Ed. 1.2 (2005-01) - Live working - Minimum requirements for the utilization of tools, devices and equipment
Gives the minimum requirements relative to specification, manufacture, selection, application and maintenance of tools, devices and equipment for live working. It provides the type of information which is useful to skilled persons in order to make the use of tools, devices and equipment safer. SFr. 53.00

IEC 60728-11 Ed. 2.0 (2005-01) - Cable networks for television signals, sound signals and interactive services - Part 11: Safety
Deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans.It provides specifically for the safety of the system, personnel working on it, subscribers and subscriber equipment. It deals only with safety aspects and is not intended to define a standard for the protection of the equipment used in the system. SFr. 149.00

ISO 10052: 2004 – Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method SFr. 118.00

ISO 21647: 2004 – Medical electrical equipment – Particular requirements for the basic safety and essential performance or respiratory gas monitors SFr. 130.00

ISO 13007-3: 2004 – Ceramic tiles – Grouts and adhesives – Part 3: Terms, definitions and specifications for grouts SFr. 56.00

ISO 23853: 2004 – Cranes – Training of slingers and signallers SFr. 93.00

ISO 14004: 2004 – Environmental management systems – General guidelines on principles, systems and support techniques SFr. 130.00

ISO/TS 19706: 2004 – Guidelines for assessing the fire threat to people SFr. 70.00

ISO 2911: 2004 – Sweetened condensed milk – Determination of sucrose content – Polarimetric method SFr. 56.00

ISO 5538: 2004 – Milk and milk products – sampling – Inspection by attributes SFr. 93.00

ISO 5543: 2004 – Caseins and caseinates – Determination of rat content – Gravimetric method (Reference method) SFr. 75.00

ISO 5943: 2004 – Cheese and processed cheese products – Determination of chloride content – Potentiometric titration method SFr. 48.00

ISO 7238: 2004 – Butter – Determination of pH of the serum – Potentionmetric method SFr. 48.00

ISO 8086: 2004 – Dairy plant – Hygiene conditions – General guidance on inspection and sampling procedures SFr. 64.00

ISO 9116: 2004 – Green coffee – Guidelines on methods of specification SFr. 40.00

ISO 21187: 2004 – Milk – Quantitative determination of bacteriological quality – Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results SFr. 75.00

ISO 20863: 2004 – Footwear – Test methods for stiffeners and toepuffs – Bondability SFr. 48.00

ISO 22774: 2004 – Footwear – Test methods for accessories: Shoe laces – Abrasion resistance SFr. 56.00

ISO 22775: 2004 – Footwear – Test methods for accessories: Mettalic accessories – Corrosion resistance SFr. 40.00

ISO 22776: 2004 – Footwear – Test methods for accessories: Touch and close fasteners – Shear strength before and after repeated closing SFr. 64.00

ISO 3864-2: 2004 – Graphical symbols – Safety colours and safety signs – Part 2: Design principles for product safety labels SFr. 99.00

ISO 16069: 2004 – Graphical symbols – Safety signs – Safety way guidance systems (SWGS) SFr. 152.00

ISO 14649-10: 2004 – Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 10: General process data SFr.188.00

ISO 14649-11: 2004 – Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 11: Process data for milling SFr.118.00

ISO/IEC 5218: 2004 – Information technology – Codes for the representation of human sexes SFr. 87.00

ISO/IEC 8825-5: 2004 – Information technology – ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 SFr. 152.00

ISO/IEC 13335-1: 2004 – Information technology – Security techniques – Management of information and communications technology security – Part 1: Concepts and models for information and communications technology security management SFr. 112.00

ISO/IEC 14496-1: 2004 – Information technology – Coding of audio-visual objects – Part 1: Systems SFr. 212.00

ISO/IEC 14776-115: 2004 – Information technology – Small computer system interface (SCSI) – Part 115: Parallel Interface-5 (SPI-5) SFr. 278.00

ISO/IRV 14776-150: 2004 – Information technology – Small computer system interface (SCSI) – Part 150: Serial attached SCSI (SAS) SFr. 326.00

ISO/IEC TR 15938-8: 2004 – Information technology – Multimedia content description interface – Part 8: Extraction and use of MPEG-7 descriptions – Amendment 1: Extensions of extraction and use of MPEG-7 descriptions SFr. 112.00

ISO/IEC TR 18047-4: 2004 – Information technology – Radio frequency identification device conformance test methods – Part 4: Test methods for air interface communications at 2,45 GHz SFr. 70.00

ISO/IEC 18056: 2004 – Information technology – Telecommunications and information exchange between systems –XML – Protocol for computer supported telecommunications applications (CSTA) phase III SFr. 296.00

ISO/IEC TR 21000-11: 2004 – Information technology – Multimedia framework (MPEG-21) – Part 11: Evaluation tools for persistent association technologies SFr. 118.00

ISO 10426-5: 2004 – Petroleum and natural gas industries – Cements and materials for well cementing – Part 5: Determination of shrinkage and expansion of well cement formulations at atomospheric pressure SFr. 75.00

ISO 10432: 2004 – Petroleum and natural gas industries – Downhole equipment – Subsurface safety valve equipment SFr. 176.00

ISO 17078-1: 2004 – Petroleum and natural gas industries – Drilling and production equipment – Part 1: Side-pocket mandrels SFr. 130.00

ISO 1514: 2004 – Paints and varnishes – Standard panels for testing SFr. 81.00

ISO 4630-1: 2004 – Clear liquids – Estimation of colour by the gardner colour scale – Part 1: Visual method SFr. 56.00

ISO 4630-2: 2004 – Clear liquids – Estimation of colour by the gardner colour scale – Part 2: Spectrophotometric method SFr. 48.00

ISO 6271-1: 2004 – Clear liquids – Estimation of colour by the platinum-cobalt scale – Part 1: Visual method SFr. 40.00

ISO 6271-2: 2004 – Clear liquids – Estimation of colour by the platinum-cobalt scale – Part 2: Spectrophotometric method SFr. 40.00

ISO 13982-2: 2004 – Protective clothing for use against solid particulates – Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits SFr. 70.00

ISO 15989: 2004 – Plastics – Film and sheeting – Measurement of water-contact angle of corona-treated films SFr. 70.00

ISO 17744: 2004 – Plastics – Determination of specific volume as a function of temperature and pressure (pvT diagram) – Piston apparatus method SFr. 87.00

ISO 13216-2: 2004 – Road vehicles – Anchorages in vehicles and attachments to anchorages for child restraint systems – Part 2: Top tether anchorages and attachments SFr. 99.00

ISO 16844-3: 2004 – Road vehicles – Tachograph systems – Part 3: Motion sensor interface SFr. 124.00

ISO 21069-1: 2004 – Road vehicles – Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 using a roller brake tester – Part 1: Pneumatic braking systems SFr. 70.00

ISO 10889-2: 2004 – Tool holders with cylindrical shank – Part 2: Type A, shanks for tool holders of special designs SFr. 40.00

ISO 10889-6: 2004 – Tool holders with cylindrical shank – Part 6: Type E with cylindrical seat SFr. 64.00

ISO 10889-7: 2004 – Tool holders with cylindrical shank – Part 7: Type F with taper seat SFr. 40.00

ISO 22917: 2004 – Superabrasives – Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride SFr. 87.00

ISO 14617-14: 2004 – Graphical symbols for diagrams – Part 14: Devices for transport and handling of material SFr. 56.00

ISO 1141: 2004 – Fibre ropes – Polyester – 3-, 4- and 8-strand ropes SFr. 48.00

ISO 22867: 2004 – Forestry machinery – Vibration test code for portable hand-held machines with internal combustion engine – Vibration at the handles SFr. 87.00

ISO 4249-3: 2004 – Motorcycle tyres and rims (code-designated series) – Part 3: Rims SFr. 70.00

ISO 5751-1: 2004 – Motorcycle tyres and rims (metric series) – Part 1: Design guides SFr. 75.00

ISO 5751-2: 2004 – Motorcycle tyres and rims (metric series) – Part 2: Tyre dimensions and load-carrying capacities SFr. 118.00

ISO 5751-3: 2004 – Motorcycle tyres and rims (metric series) – Part 3: Range of approved rim contours SFr. 48.00

ISO 15012-1: 2004 – Health and safety in welding and allied processes – Requirements t