Standards News Bulletin – July 2004

Steel, Stainless Steel and Related Alloys

ASTM A 193/A 193M-04, Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service, has been replaced by A 193/A 193M-04a.
Corrections were made in Sections 9, 16, and S5 and Tables 1, 4, and 5.

ASTM A 182/A 182M-04, Specification for Forged or Rolled Alloy-steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service (R)

ASTM A 790/A 790M-04, Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe (R)

ASTM A 928/A 928M-04, Specification for Ferritic/Austenitic Duplex Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal (R)

ASTM A 106/A 106M-04, Specification for Seamless Carbon Steel Pipe for High-temperature Service (R)

ASTM A 139/A 139M-04, Specification for Electric-fusion Arc-Welded Steel Pipe Nps 4 and Over (R)

ASTM A 213/A 213M-04, Specification for Seamless Ferritic and Austenitic Alloy-steel Boiler, Superheater, and Heat-exchanger Tubes (R)

ASTM A 250/A 250M-04, Specification for Electric-resistance-welded Ferritic Alloy-steel Boiler and Superheater Tubes (R)

ASTM A 269-04, Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service (R)

ASTM A 312/A 312M-04 (Includes Change to Title), Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes (R)

ASTM A 334/A 334M-04, Specification for Seamless and Welded Carbon and Alloy-steel Tubes for Low-temperature Service (R)

ASTM A 350/A 350M-04, Specification for Carbon and Low-alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components (R)

ASTM A 358/A 358M-04 (Includes Change to Title), Specification for Electric-fusion-welded Austenitic Chromium-nickel Stainless Steel Pipe for High-temperature Service and General Applications (R)

ASTM A 960/A 960M-04, Specification for Common Requirements for Wrought Steel Piping Fittings (R)

ASTM A 1008/A 1008M-04a, Specification for Steel, Sheet, Cold-rolled, Carbon, Structural, High-strength Low-alloy and High-strength Low-alloy with Improved Formability (R)

ASTM A 1011/A 1011M-04, Specification for Steel, Sheet and Strip, Hot-rolled, Carbon, Structural, High-strength Low-alloy and High-strength Low-alloy with Improved Formability (R)

ASTM A 706/A 706M-04a, Specification for Low-alloy Steel Deformed and Plain Bars for Concrete Reinforcement (R)

ASTM A 955/A 955M-04a, Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement (R)

ASTM A 996/A 996M-04, Specification for Rail-steel and Axle-steel Deformed Bars for Concrete Reinforcement (R)

ASTM A 36/A 36M-04, Specification for Carbon Structural Steel (R)

ASTM A 131/A 131M-04, Specification for Structural Steel for Ships (R)

ASTM A 242/A 242M-04, Specification for High-strength Low-alloy Structural Steel (R)

ASTM A 529/A 529M-04, Specification for High-strength Carbon-manganese Steel of Structural Quality (R)

ASTM A 572/A 572M-04, Specification for High-strength Low-alloy Columbium-vanadium Structural Steel (R)

ASTM A 588/A 588M-04, Specification for High-strength Low-alloy Structural Steel with 50 Ksi 345 Mpa Minimum Yield Point to 4 Ndash;in. 100–mm Thick (R)

ASTM A 709/A 709M-04, Specification for Carbon and High-strength Low-alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-tempered Alloy Structural Steel Plates for Bridges (R)

ASTM A 775/A 775M-04, Specification for Epoxy-coated Steel Reinforcing Bars (R)

ASTM A 913/A 913M-04, Specification for High-strength Low-alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-tempering Process (Qst) (R)

ASTM A 992/A 992M-04, Specification for Structural Steel Shapes (R)

ASTM A 304-04, Specification for Carbon and Alloy Steel Bars Subject to End-quench Hardenability Requirements (R)

ASTM A 434-04, Specification for Steel Bars, Alloy, Hot-wrought or Cold-finished, Quenched and Tempered (R)

ASTM A 534-04, Specification for Carburizing Steels for Anti-friction Bearings (R)

ASTM A 541/A 541M-04, Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components (R)

ASTM A 711-04, Specification for Steel Forging Stock (R)

ASTM A 29/A 29M-04 (Includes Change to Title), Specification for Steel Bars, Carbon and Alloy, Hot-wrought, General Requirements for (R)

ASTM A 788-04, Specification for Steel Forgings, General Requirements (R)

ASTM B 8-04, Specification for Concentric-lay-stranded Copper Conductors, Hard, Medium-hard, or Soft (R)

ASTM B 231/B 231M-04, Specification for Concentric-lay-stranded Aluminum 1350 Conductors (R)

ASTM B 263-04, Test Method for Determination of Cross-sectional Area of Stranded Conductors (R)

ASTM B 279-04, Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication (R)

ASTM B 400-04, Specification for Compact Round Concentric-lay-stranded Aluminum 1350 Conductors (R)

ASTM B 496-04, Specification for Compact Round Concentric-lay-stranded Copper Conductors (R)

ASTM B 901-04, Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction (R)

ASTM B 902-04, Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-hard, or Soft Using Single Input Wire Construction (R)

ASTM B 226-04, Specification for Cored, Annular, Concentric-lay-stranded Copper Conductors (R)

ASTM B 227-04, Specification for Hard-drawn Copper-clad Steel Wire (R)

ASTM B 228-04, Specification for Concentric-lay-stranded Copper-clad Steel Conductors (R)

ASTM B 229-04, Specification for Concentric-lay-stranded Copper and Copper-clad Steel Composite Conductors (R)

ASTM B 566-04, Specification for Copper-clad Aluminum Wire (R)

ASTM B 869-04, Specification for Copper-clad Steel Electrical Conductor for Catv Drop Wire (R)

ASTM B 176-04, Specification for Copper-alloy Die Castings (R)

ASTM B 283-04, Specification for Copper and Copper-alloy Die Forgings Hot-pressed (R)

ASTM B 764-04 (Includes Change to Title), Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit Step Test (R)

ASTM B 839-04, Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod --inclined Wedge Method (R)

ASTM B 727-04, Practice for Preparation of Plastics Materials for Electroplating

ASTM B 933-04, Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials

ASTM B 934-04, Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

ASTM B 243-04, Terminology of Powder Metallurgy (R)

ASTM B 438/B 438M-04, Specification for Sintered Bronze Bearings Oil-Impregnated (R)

ASTM C 425-04, Specification for Compression Joints for Vitrified Clay Pipe and Fittings (R)

ASTM C 479-04, Specification for Vitrified Clay Liner Plates (R)

ASTM C 1497-04, Specification for Cellulosic Fiber Stabilized Thermal Insulation (R)

ASTM C 1242-03b, Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems (R)

ASTM C 1572-04, Guide for Dry Lead Glass and Oil-filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities

Erratum

ASTM D 4239-02a Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods has been replaced by D 4239-04. Corrections were made to Tables 2 and 3.

ASTM D 346-04, Practice for Collection and Preparation of Coke Samples for Laboratory Analysis (R)

ASTM D 4916-04, Practice for Mechanical Auger Sampling (R)

ASTM D 5055-04, Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-joists (R)

ASTM D 6782-04, Test Methods for Standardization and Calibration of In-line Dry Lumber Moisture Meters (R)

ASTM D 3664-04, Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment (R)

ASTM D 7030-04, Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine

ASTM D 7024-04, Test Method for Steady State and Dynamic Thermal Performance of Textile Materials

ASTM D 4522-04 (Includes Change to Title), Performance Specification for Feather and Down Fillings for Textile Products (R)

ASTM D 6673-04, Practice for Sewn Products Pattern Data Interchange--Data Format (R)

ASTM D 6962-04, Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings (R)

ASTM D 896-04 (Includes Change to Title), Practice for Resistance of Adhesive Bonds to Chemical Reagents (R)

ASTM D 907-04, Terminology of Adhesives (R)

ASTM D 1337-04 (Includes Change to Title), Practice for Storage Life of Adhesives by Viscosity and Bond Strength (R)

ASTM D 5656-04, Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading (R)

ASTM D 6004-04, Test Method for Determining Adhesive Shear Strength of Carpet Adhesives (R)

ASTM D 6105-04, Practice for Application of Electrical Discharge Surface Treatment Activation of Plastics for Adhesive Bonding (R)

ASTM D 6994-04, Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with Uv Detection

ASTM D 6865-04, Classification System for Acrylonitrile-styrene-acrylate Asa and Acrylonitrile-epdm-styrene Aes Plastics and Alloys Molding and Extrusion Materials

ASTM D 4877-04, Test Method for Polyurethane Raw Materials: Determination of Apha Color in Isocyanates (R)

ASTM D 6110-04, Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics (R)

ASTM D 4642-04, Test Method for Platinum in Reforming Catalysts by Wet Chemistry (R)

ASTM D 5153-04, Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption (R)

ASTM E 2307-04, Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-scale, Multi-story Test Apparatus

ASTM E 2336-04, Test Methods for Fire Resistive Grease Duct Enclosure Systems

ASTM E 1354-04, Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (R)

ASTM E 1354-04a, Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (R)

ASTM E 1474-04, Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter (R)

ASTM E 1623-04, Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter ICAL (R)

ASTM E 1995-04a, Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, with the Test Specimen Oriented Horizontally (R)

ASTM E 2102-04a, Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater (R)

ASTM E 2354-04, Guide for Assessing the Durability of Absorptive Electrochromic Coatings Within Sealed Insulating Glass Units

ASTM E 2355-04, Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface

ASTM E 405-04, Test Methods for Wear Testing Rotary Operators for Windows (R)

ASTM E 2271-04, Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-family Dwellings and Child-occupied Facilities (R)

ASTM E 2255-04, Practice for Conducting Visual Assessments for Lead Hazards in Buildings (R)

ASTM E 1212-04 (Includes Change to Title), Practice for Quality Management Systems for Nondestructive Testing Agencies (R)

ASTM E 1476-04, Guide for Metals Identification, Grade Verification, and Sorting (R)

ASTM E 460-04, Practice for Determining Effect of Packaging on Food and Beverage Products During Storage (R)

ASTM E 679-04, Practice for Determination of Odor and Taste Thresholds by a Forced-choice Ascending Concentration Series Method of Limits (R)

ASTM E 2352-04, Practice for Aerospace Cleanrooms and Associated Controlled Environments--Cleanroom Operations

ASTM E 2331-04, Guide for Examination of Altered Documents

ASTM E 413-04, Classification for Rating Sound Insulation (R)

ASTM E 966-04, Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements (R)

ASTM E 2235-04, Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods (R)

ASTM E 1687-04, Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids (R)

ASTM E 1972-04, Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment (R)

ASTM E 2360-04, Specification for Cryptolaemus Montrouzieri Mulsant (Coleoptera: Coccinellidae)

ASTM E 2361-04, Guide for Testing Leave-on Products Using In-Situ Methods

ASTM E 2039-04, Test Method for Determining and Reporting Dynamic Dielectric Properties (R)

ASTM F 1108-04, Specification for Titanium-6aluminum-4vanadium Alloy Castings for Surgical Implants UNS R56406 (R)

ASTM F 1717-04, Test Methods for Spinal Implant Constructs in a Vertebrectomy Model (R)

ASTM F 1800-04, Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements (R)

ASTM F 2267-04, Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression (R)

ASTM F 1544-04, Specification for Determining the Rating Velocities of an Archery Bow (R)

ASTM F 1918-04, Safety Performance Specification for Soft Contained Play Equipment (R)

ASTM F 1056-04, Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings (R)

ASTM F 1673-04, Specification for Polyvinylidene Fluoride (Pvdf) Corrosive Waste Drainage Systems (R)

ASTM F 1807-04, Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for Sdr9 Cross-linked Polyethylene (PEX) Tubing (R)

ASTM F 1947-04, Practice for Installation of Folded Poly Vinyl Chloride PVC Pipe Into Existing Sewers and Conduits (R)

ASTM F 2023-04, Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water (R)

ASTM F 2300-04, Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing

ASTM F 1790-04, Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing (R)

ASTM F 1819-04, Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique (R)

ASTM F 2374-04, Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices

ASTM F 853-04, Practice for Maintenance Procedures for Amusement Rides and Devices (R)

ASTM F 893-04, Guide for Inspection of Amusement Rides and Devices (R)

ASTM F 1193-04, Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements (R)

ASTM F 2291-04, Practice for Design of Amusement Rides and Devices (R)

ASTM F 2379-04, Test Method for Energy Performance of Powered Open Warewashing Sinks

ASTM F 2380-04, Test Method for Performance of Conveyor Toasters

ASTM F 859-04, Specification for Heat-sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type (R)

ASTM F 1047-04, Specification for Frying and Braising Pans, Tilting Type (R)

ASTM F 1371-04, Specification for Vegetable Peeling Machines, Electric (R)

ASTM F 1484-04, Test Methods for Performance of Steam Cookers (R)

ASTM G 178-03, Practice for Determining the Activation Spectrum of a Material Wavelength Sensitivity to an Exposure Source Using the Sharp Cut-on Filter or Spectrographic Technique

BS EN ISO 75-1: 2004 – Plastics – Determination of temperature of deflection under load – Part 1: General test method £ 56.00

BS EN ISO 75-2: 2004 – Plastics – Determination of temperature of deflection under load – Part 2: Plastics, ebonite and long-fibre-reinforced composites £ 56.00

BS EN ISO 75-3: 2004 – Plastics – Determination of temperature of deflection under load – Part 3: High-strength thermosetting laminates £ 56.00

BS 350: 2004 – Conversion factors for units £ 138.00

BS EN ISO 389-8: 2004 – Acoustics – Reference zero for the calibration of audiometric equipment – Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaral earphones £ 56.00

BS EN 403: 2004 – Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking £ 94.00

BS 476-3: 2004 – Fire tests on building materials and structures – Part 3: Classification and method of test for external fire exposure to roofs £ 56.00

BS EN 572-8: 2004 – Glass in building – Basic soda lime silicate glass products – Part 8: Supplied and final cut sizes £ 80.00

BS EN 703: 2004 – Agricultural machinery – Silage loading, mixing and/or chopping and distributing machines – Safety £ 94.00

BS EN 764-1: 2004 – Pressure equipment – Part 1: Terminology – Pressure, temperature, volume, nominal size £ 56.00

BS EN 878: 2004 – Chemicals used for treatment of water intended for human consumption – Aluminium sulfate £ 80.00

BS EN 957-9: 2003 – Stationary training equipment – Part 9: Elliptical trainers, additional specific safety requirements and test methods £ 56.00

BS EN 1062-1: 2004 – Paints and varnishes – Coating materials and coating materials and coating systems for exterior masonry and concrete – Part 1: Classification £ 56.00

BS EN 1062-7: 2004 – Paints and varnishes – Coating materials and coating materials and coating systems for exterior masonry and concrete – Part 7: Determination of crack bridging properties £ 94.00

BS ISO 1268-8: 2004 – Fibre-reinforced plastics – Methods of producing test plates – Part 8: Compression moulding of SMC and BMC £ 56.00

BS 1339-3: 2004 – Humidity – Part 3: Guide to the measurement of humidity £ 94.00

BS EN 1466: 2004 – Child care articles – Carry cots and stands – Safety requirements and test methods £ 80.00

BS EN 1492-4: 2004 – Textiles slings – Safety – Part 4: Lifting slings for general service made from natural and man-made fibre ropes £ 94.00

BS EN 1514-7: 2004 – Flanges and their joints – Gaskets for PN-designated flanges – Part 7: Covered metal jacketed gaskets for use with steel flanges £ 56.00

BS EN ISO 1628-3: 2003 – Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 3: Polyethylenes and polypropylenes £ 56.00

BS EN 1639: 2004 – Dentistry – Medical devices for dentistry – Instruments £ 56.00

BS EN 1640: 2004 – Dentistry – Medical devices for dentistry – Equipment £ 56.00

BS EN 1641: 2004 – Dentistry – Medical devices for dentistry – Materials £ 44.00

BS EN 1642: 2004 – Dentistry – Medical devices for dentistry – Dental implants £ 44.00

BS EN 1762: 2003 – Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification £ 56.00

BS ISO 3045: 2004 – Oil of bay {Pimenta racemosa (Mill.) J.W. Moore} £ 44.00

BS 3388: 2004 – Forks, shovels and spades – Requirements and test methods £ 114.00

BS ISO 3809: 2004 – Oil of lime (cold pressed), Mexican type {Citrus aurantifolia (Christm.) Swingle}, obtained by mechanical means £ 56.00

BS ISO 3858: 2004 – Rubber compounding ingredients – Carbon Black – Determination of light transmittance of toluene extract £ 44.00

BS EN ISO 4126-1: 2004 – Safety devices for protection against excessive pressure – Part 1: Safety valves £ 94.00

BS ISO 4718: 2004 – Oil of lemongrass {Cymbopogon flexuosus (Nees ex Steudel) J.F. Watson} £ 44.00

BS ISO 4725: 2004 – Oil of cedarwood, Texas (Juniperus mexicana Schiede) £ 44.00

BS EN ISO 5356-1: 2004 – Anaesthetic and respiratory equipment – Conical connectors – Part 1: Cones and sockets £ 80.00

BS EN ISO 5534: 2004 – Cheese and processed cheese – Determination of the total solids content (Reference method) £ 56.00

BS EN ISO 5667-19: 2004 – Water quality – Sampling – Part 19: Guidance on sampling in marine sediments £ 80.00

BS 5867-1: 2004 – Textiles and textile products – Curtains and drapes – Part 1: General requirements £ 44.00

BS EN ISO 6272-1: 2004 – Paints and varnishes – Rapid-deformation (impact resistance) tests – Part 1: Falling-weight test, large-area indenter £ 56.00

BS ISO 6489-3: 2004 – Agricultural vehicles – Mechanical connections between towed and towing vehicles – Part 3: Tractor drawbar £ 44.00

BS 6701: 2004 – Telecommunications equipment and telecommunications cabling – Specification for installation, operation and maintenance £ 56.00

BS PD 6682-8: 2004 – Aggregates – Part 8: Aggregates for railway ballast – Guidance on the use of BS EN 13450 £ 56.00

BS EN ISO 6878: 2004 – Water quality – Determination of phosphorus – Ammonium molybdate spectrometric method £ 80.00

BS EN ISO 7142: 2004 – Binders for paints and varnishes – Epoxy resins – General methods of test £ 44.00

BS ISO 7862: 2004 – Road vehicles – Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions £ 56.00

BS EN ISO 8130-14: 2004 – Coating powders – Part 14: terminology £ 44.00

BS 8412: 2004 – Equipment for crop protection – Performance requirements for application systems used to make spatially variable applications to field crops – Specification £ 44.00

BS ISO 8573-8: 2004 – Compressed air – Part 8: Test methods for solid particle content by mass concentration £ 56.00

BS EN ISO 8835-5: 2004 – Inhalational anaesthesia systems – Part 5: Anaesthesia ventilators £ 80.00

BS EN ISO 8847: 2004 – Small craft – Steering gear – Cable and pulley systems £ 56.00

BS EN ISO 8871: 2004 – Elastomeric parts for parenterals and for devices for pharmaceuticals use – Part 3: Determination of released-particle count £ 56.00

BS ISO 10110-17: 2004 – Optics and photonics – Preparation of drawings for optical elements and systems – Part 17: Laser irradiation damage threshold £ 44.00

ISO EN 10168: 2004 – Steel products – Inspection documents – List of information and description £ 56.00

BS EN ISO 10427-2: 2004 – Petroleum and natural gas industries – Equipment for well cementing – Part 2: Centralizer placement and stop-collar testing £ 80.00

BS EN ISO 11337: 2004 – Plastics – Polyamides – Determination of Î -caprolactam and w -laurolactam by gas chromatography £ 80.00

BS EN 12560-7: 2004 – Flanges and their joints – Gaskets for class-designated flanges – Part 7: Covered metal jacketed gaskets for use with steel flanges £ 56.00

BS EN 12810-1: 2003 – Facade scaffolds made of prefabricated components – Part 1: Products specifications £ 80.00

BS EN 12810-2: 2003 – Facade scaffolds made of prefabricated components – Part 2: Particular methods of structural design £ 80.00

BS EN 12811-1: 2003 – Temporary works equipment – Part 1: Scaffolds – Performance requirements and general design £ 114.00

BS EN 12952-14: 2004 – Water-tube boilers and auxiliary installations – Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammo9nia and ammonia water solution £

BS EN 13120: 2004 – Internal blinds – Performance requirements including safety £ 80.00

BS ISO 13372: 2004 – Condition monitoring and diagnostics of machines – Vocabulary £ 56.00

BS EN 13561: 2004 – External blinds – Performance requirements including safety £ 108.00

BS EN 13586: 2004 – Cranes – Access £ 80.00

BS EN 13617-1: 2004 – Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units £ 114.00

BS EN 13630-9: 2004 – Explosives for civil uses – Detonating cords and safety fuses – Part 9: Determination of transmission of detonation from detonating cord to detonating cord £ 44.00

BS EN 13675: 2004 – Safety of machinery – Safety requirements for tube forming and rolling mills and their finishing line equipment £ 114.00

BS EN 13748-1: 2004 – Terrazzo tiles – Part 1: Terrazzo tiles for internal use £ 94.00

BS ISO 13887: 2004 – Cold-reduced steel sheet of higher yield strength with improved formability £ 56.00

BS EN 13892-3: 2004 – Methods of test for screed materials – Part 3: Determination of wear resistance –

Bohme £ 44.00

BS EN ISO 13897: 2004 – Dentistry – Amalgam capsules £ 56.00

BS EN 14136: 2004 – Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures £ 44.00

BS EN 14216: 2004 – Cement – Composition, specifications and conformity criteria for very low heat special cements £ 80.00

BS EN 14299: 2004 – Non active surgical implants – Particular requirements for cardiac and vascular implants – Specific requirements for arterial stents £ 94.00

BS EN ISO 14327: 2004 – Resistance welding – Procedures for determining the weldability lobe for resistance spot, projection and seam welding £ 56.00

BS EN 14329: 2004 – Inland navigation vessels – Installation of berths and loading areas £ 56.00

BS EN 14414: 2004 – Geosynthetics – Screening test method for determining chemical resistance for landfill applications £ 44.00

BS EN 14415: 2004 – Geosynthetic barriers – Test method for determining the resistance to leaching £ 44.00

BS EN 14469-1: 2004 – Pigments and extenders – Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) – Part 1: Composition and preparation of basic mixtures £ 44.00

BS ISO/IEC 14496-8: 2004 – Information technology – Coding of audio-visual objects – Part 8: Carriage of ISO/IEC 14496 contents over IP networks £ 56.00

BS EN 14511-1: 2004 – Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 1: Terms and definitions £ 56.00

BS EN 14511-2: 2004 – Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 2: Test conditions £ 56.00

BS EN 14511-3: 2004 – Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 3: Test methods £ 108.00

BS EN 14511-4: 2004 – Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 4: Requirements £ 56.00

BS EN 14608: 2004 – Windows – Determination of the resistance to racking £ 44.00

BS ISO/IEC 14662: 2004 – Information technology – Open-edi reference model £ 108.00

BS ISO 15117-1: 2004 – Coal flow properties – Part 1: Bin flow £ 80.00

BS ISO 15175: 2004 – Soil quality – Characterization of soil related to groundwater protection £ 114.00

BS EN ISO 15236-2: 2004 – Steel cord conveyor belts – Part 2: Preferred belt types £ 44.00

BS EN ISO 15236-4: 2004 – Steel cord conveyor belts – Part 4: Vulcanized belt joints £ 44.00

BS ISO 15243: 2004 – Rolling bearings – Damage and failures – Terms, characteristics and causes £ 108.00

BS ISO/IEC 15444-2: 2004 – Information technology – JPEG 2000 image coding system – Part 2: Extensions £ 196.00

BS EN ISO 15465: 2004 – Pipework – Stripwound metal hoses and hose assemblies £ 80.00

BS EN ISO 15496: 2004 – Textiles – Measurement of water vapour permeability of textiles for the purpose of quality control £ 56.00

BS EN ISO 15605: 2004 – Adhesives – Sampling £ 56.00

BS EN ISO 15613: 2004 – Specification and qualification of welding procedures for metallic materials – Qualification based on pre-production welding test £ 44.00

BS EN ISO 15614-1: 2004 – Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys £ 94.00

BS EN ISO 15749-1: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 1: Sanitary drainage-system design £ 80.00

BS EN ISO 15749-2: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 2: Sanitary drainage, drain piping for gravity system £ 56.00

BS EN ISO 15749-3: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 3: Sanitary drainage, drain piping for vacuum system £ 80.00

BS EN ISO 15749-5: 2004 – Ships and marine technology – Drainage systems on ships and marine structures – Part 5: Drainage of decks, cargo spaces and swimming pools £ 56.00

BS ISO 15828: 2004 – Road vehicles – Offset frontal impact test procedure £ 56.00

BS EN ISO 15874-1: 2003 – Plastics piping systems for hot and cold water installations - Polypropylene (PP) – Part 1: General £ 56.00

BS EN ISO 15874-2: 2003 – Plastics piping systems for hot and cold water installations - Polypropylene (PP) – Part 2: Pipes £ 80.00

BS EN ISO 15874-5: 2003 – Plastics piping systems for hot and cold water installations - Polypropylene (PP) – Part 5: Fitness for purpose of the system £ 56.00

BS EN ISO 15875-1: 2003 – Plastics piping systems for hot and cold water installations – Crosslinked polypropylene (PE-X) – Part 1: General £ 56.00

BS EN ISO 15875-3: 2003 – Plastics piping systems for hot and cold water installations – Crosslinked polypropylene (PE-X) – Part 3: Fittings £ 56.00

BS EN ISO 15875-5: 2003 – Plastics piping systems for hot and cold water installations – Crosslinked polypropylene (PE-X) – Part 5: Fitness for purposes of the system £ 56.00

BS EN ISO 15876-1: 2003 – Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 1: General £ 56.00

BS EN ISO 15876-2: 2003 – Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 2: Pipes £ 56.00

BS EN ISO 15876-3: 2003 – Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 3: Fittings £ 56.00

BS EN ISO 15876-5: 2003 – Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 5: Fitness for purpose of the system £ 56.00

BS EN ISO 15877-1: 2003 – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) – Part 1: General £ 56.00

BS EN ISO 15877-2: 2003 – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) – Part 2: Pipes £ 56.00

BS EN ISO 15877-3: 2003 – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) – Part 3: Fittings £ 80.00

BS EN ISO 15877-5: 2003 – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) – Part 5: Fitness for purpose of the system £ 56.00

BS ISO 15902: 2004 – Optics and photonics – Diffractive optics – Vocabulary £ 80.00

BS ISO 16002: 2004 – Stored cereal grains and pulses – Guidance on the detection of infestation by live invertebrates by trapping £ 80.00

BS ISO 17101: 2004 – Agricultural machinery – Rotary and flail mowers – Thrown-object test and acceptance criteria £ 80.00

BS EN ISO 17994: 2004 – Water quality – Criteria for establishing equivalence between microbiological methods £ 80.00

BS ISO 18054: 2004 – Oils of orris rhizome (Iris pallida Lam, or Iris germanica L.) – Determination of irone content – Method using gas chromatography on a capillary column £ 56.00

BS ISO 18073: 2004 – Water quality – Determination of tetra-to octa-chlorinated dioxins and furans – Method using isotope dilution HRGC/HRMS £ 114.00

BS ISO 18593: 2004 – Microbiology of food and animal feeding stuffs – Horizontal methods for sampling techniques from surfaces using contact plates and swabs £ 56.00

BS ISO 19739: 2004 – Natural gas – Determination of sulfur compounds using gas chromatography £ 114.00

BS ISO/IEC 21000-6: 2004 – Information technology – Multimedia framework (MPEG-21) – Part 6: Rights Data Dictionary £ 176.00

BS EN ISO 21549-2: 2004 – Health informatics – Patient healthcard data – Part 2: Common objects £ 80.00

BS EN ISO 21549-3: 2004 – Health informatics – Patient healthcard data – Part 3: Limited clinical £ 56.00

BS DD ISO/TS 21667: 2004 – Health informatics – Health indicators conceptual framework £ 44.00

BS ISO 22090-2: 2004 – Ships and marine technology – Transmitting heading devices (THDS) – Part 2: Geomagnetic principles £ 56.00

BS ISO 22972: 2004 – Essential oils – Analysis by gas chromatography on chiral capillary – Columns – General method £ 44.00

BS EN 60286-5: 2004 – Packaging of components for automatic handling – Part 5: Matrix trays £ 80.00

BS EN 60300-2: 2004 – Dependability management – Part 2: Guidelines for dependability management £ 114.00

BS EN 60300-3-14: 2004 – Dependability management – Part 3-14: Application guide – Maintenance and maintenance support £ 108.00

BS EN 60539-2: 2004 – Directly heated negative temperature coefficient thermistors – Part 2: Sectional specification – Surface mount negative temperature coefficient thermistors £ 80.00

BS DD IEC TS 60695-7-3: 2004 – Fire hazard testing – Part 7-3: Toxicity of fire effluent – Use and interpretation of test results £ 56.00

BS EN 60749-23: 2004 – Semiconductor devices – Mechanical and climatic test methods – Part 23: High temperature operating life £ 44.00

BS EN 60749-24: 2004 – Semiconductor devices – Mechanical and climatic test methods – Part 24: Accelerated moisture resistance – Unbiased HAST £ 44.00

BS EN 60749-34: 2004 – Semiconductor devices – Mechanical and climatic test methods – Part 34: Power cycling £ 44.00

BS EN 60825-12: 2004 – Safety of laser products – Part 12: Safety of free space optical communication systems used for transmission of information £ 94.00

BS EN 60998-1: 2004 – Connecting devices for low-voltage circuits for household and similar purposes – Part 1: General requirements £ 80.00

BS EN 60998-2-1: 2004 – Connecting devices for low-voltage circuits for household and similar purposes – Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units £ 80.00

BS EN 60998-2-2: 2004 – Connecting devices for low-voltage circuits for household and similar purposes – Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units £ 80.00

BS EN 60998-2-3: 2004 – Connecting devices for low-voltage circuits for household and similar purposes – Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units £ 80.00

BS EN 61006: 2004 – Electrical insulating materials – Methods of test for the determination of the glass transition temperature £ 80.00

BS EN 61076-2-103: 2004 – Connectors for electronic equipment – Part 2-103: Circular connectors –Detail specification for a range of multipole connectors (Type "XLR") £ 94.00

BS EN 61086-1: 2004 – Coatings for loaded printed wire boards (conformal coatings) – Part 1: Definitions, classification and general requirements £ 44.00

BS EN 61086-2: 2004 – Coatings for loaded printed wire boards (conformal coatings) – Part 2: Methods of test £ 80.00

BS EN 61086-3-1: 2004 – Coatings for loaded printed wire boards (conformal coatings) – Part 3-1: Specifications for individual materials – Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3) £ 44.00

BS EN 61340-4-1: 2004 – Electrostatics – Part 4-1: Standard test methods for specific applications – Electrical resistance of floor coverings and installed floors £ 56.00

BS EN 61386-1: 2004 – Conduit systems for cable management – Part 1: General requirements £ 94.00

BS EN 61386-21: 2004 – Conduit systems for cable management – Part 21: Particular requirements – Rigid conduit systems £ 56.00

BS EN 61386-22: 2004 – Conduit systems for cable management – Part 22: Particular requirements – Pliable conduit systems £ 56.00

BS EN 61386-23: 2004 – Conduit systems for cable management – Part 23: Particular requirements – Flexible conduit systems £ 56.00

BS EN 61400-1: 2004 – Wind turbine generator systems – Part 1: Safety requirements £ 114.00

BS DD CLC/TS 61482-1: 2003 – Live working – Flame-resistant materials for clothing for thermal protection of workers – Thermal hazards of an electric arc – Part 1: Test methods £ 56.00

BS EN 61496-1: 2004 – Safety of machinery – Electro-sensitive protective equipment – Part 1: General requirements and tests £ 114.00

BS EN 61747-6: 2004 – Liquid crystal and solid-state display devices – Part 6: Measuring methods for liquid crystal modules – Transmissive type £ 94.00

BS EN 61810-1: 2004 – Electromechanical elementary relays – Part 1: General and safety requirements £ 114.00

BS EN 61850-9-2: 2004 – Communication networks and systems in substation – Part 9-2: Specific communication service mapping (SCSM) – Sampled values over ISO/IEC 8802-3 £ 94.00

BS EN 62005-7: 2004 – Reliability of fibre optic interconnecting devices and passive optical components – Part 7: Life stress modeling £ 44.00

BS EN 62011-2: 2004 – Insulating materials – Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes – Part 2: Methods of test £ 56.00

BS EN 62148-12: 2004 – Fibre optic active components and devices – Package and interface standards – Part 12: Laser transmitters with coaxial RF connector £ 56.00

BS EN 62271-203: 2004 – High-voltage switchgear and controlgear – Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV £ 126.00

BS DD IEC TS 62370: 2004 – Electroacoustics – Instruments for the measurement of sound intensity – Electromagnetic and electrostatic compatability requirements and test procedures £ 30.00

DIN EN 13630-1: 2004 – Explosives for civil uses – Detonating cords and safety fuses – Part 1: Requirements EURO 65.60

DIN EN 13630-5: 2004 – Explosives for civil uses – Detonating cords and safety fuses – Part 5: Determination of resistance to abrasion of detonating cords EURO 80.60

DIN EN 13763-16: 2004 – Explosives for civil uses – Detonators and relays – Part 16: Determination of delay accuracy EURO 102.30

DIN EN 13763-17: 2004 – Explosives for civil uses – Detonators and relays – Part 17: Determination of no-fire current of electric detonators EURO 65.60

DIN EN 13763-18: 2004 – Explosives for civil uses – Detonators and relays – Part 18: Determination of series firing current of electric detonators EURO 72.70

DIN EN 13763-19: 2004 – Explosives for civil uses – Detonators and relays – Part 19: Determination of firing impulse of electric detonators EURO 72.70

DIN EN 13763-21: 2004 – Explosives for civil uses – Detonators and relays – Part 21: Determination of flash-over voltage of electric detonators EURO 65.60

DIN EN 13763-22: 2004 – Explosives for civil uses – Detonators and relays – Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leading wires EURO 72.70

DIN EN 13938-4: 2004 – Explosives for civil uses – Propellants and rocket propellants – Part 4: Determination of burning rate under ambient conditions EURO 58.70

DIN EN 14210: 2004 – Surface active agents – Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method
Supersedes DIN 53993: 1997 Edn. EURO 80.60

DIN EN 12697-12: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 12: Determination of the water sensitivity of bituminous specimens EURO 65.60

DIN EN 12697-20: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 20: Indentation using cube or Marshall specimens EURO 72.70

DIN EN 12697-33: 2004 – Bituminous mixtures – Test methods for hot mix asphalt – Part 33: Specimen prepared by roller compactor EURO 87.90

DIN EN 12269-2: 2004 – Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" – Part 2: Long-term test EURO 65.60

DIN EN 12637-3: 2004 – Products and systems for the protection and repair of concrete structures – Test methods – Compatibility of injection products – Part 3: Effect of injection products on elastomers EURO 58.70

DIN EN 12810-1: 2004 – Facade scaffolds made of prefabricated components – Part 1: Product specifications
This standard, together with DIN EN 12810-2: 2004 Edn., supersedes DIN 4420-4: 1988 Edn. EURO 94.70

DIN EN 12810-2: 2004 – Facade scaffolds made of prefabricated components – Part 2: Particular methods of structural design
This standard, together with DIN EN 12810-1: 2004 Edn., supersedes DIN 4420-4: 1988 Edn. EURO 94.70

DIN EN 12811-1: 2004 – Temporary works equipment – Part 1: Scaffolds – Performance requirements and general design
This standard, together with DIN 4420-1: 2004 Edn., supersedes DIN 4420-1: 1990 Edn. EURO 130.10

DIN EN 13454-2: 2004 – Binders, composite binders and factory-made mixtures for floor screeds based on calcium sulfate – Part 2: Test methods
Supersedes parts of DIN 4208: 1997 Edn. EURO 94.70

DIN EN 13578: 2004 – Products and systems for the protection and repair of concrete structures – Test methods – Compatibility with wet concrete EURO 58.70

DIN EN 14068: 2004 – Products and systems for the protection and repair of concrete structures – Test methods – Determination of water tightness of injected cracks without movement in concrete EURO 58.70

DIN EN 14411: 2004 – Ceramic tiles – Definitions, classification, characteristics and marking
Supersedes DIN EN 87 and DIN EN 176: 1992 Edns., and DIN EN 121, DIN EN 159, DIN EN 177, DIN EN 178, DIN EN 186-1, DIN EN 186-2, DIN EN 187-1, DIN EN 187-2, and DIN EN 188: 1991 Edns. EURO 163.90

DIN EN ISO 15927-1: 2004 – Hygrothermal performance of buildings – Calculation and presentation of climatic data – Part 1: Monthly and annual means of single meteorological elements EURO 109.30

DIN EN 14183: 2004 – Step stools
Supersedes DIN 4569: 1997 Edn. 80.60

DIN EN 14021: 2004 – Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods EURO 87.90

DIN EN 14095: 2004 – Water conditioning equipment inside buildings – Electrolytic treatment systems with aluminium anodes – Requirements for performance, safety and testing EURO 94.70

DIN EN 14326: 2004 – Leather – Physical and mechanical tests – Determination of resistance to horizontal spread of flame EURO 65.60

DIN EN ISO 14698-2: 2004 – Cleanrooms and associated controlled environments – Biocontamination control – Part 2: Evaluation and interpretation of biocontamination data EURO 80.60

DIN EN ISO 15586: 2004 – Water quality – Determination of trace elements using atomic absorption spectrometry with graphite furnace EURO 102.30

DIN ISO 15767: 2004 – Workplace atmospheres – Controlling and characterizing errors in weighing collected aerosols EURO 67.90

DIN 38415-6: 2003 – German standard methods for the examination of water, waste water and sludge – Subanimal testing (group T) – Determination of the effect of nonacute toxicity of waste water on the development of fish eggs (K 9) EURO 72.70

DIN ISO 3019-1: 2004 – Hydraulic fluid power – Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors – Part 1: Inch series shown in metric units EURO 53.30

DIN ISO 3019-2: 2004 – Hydraulic fluid power – Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors – Part 2: Metric series
Supersedes DIN ISO 3019-3: 1984 Edn. EURO 63.00

DIN ISO 10763: 2004 – Hydraulic fluid power – Plain-end, seamless and welded precision steel tubes – Dimensions and nominal working pressures EURO 33.70

DIN EN 12560-6: 2004 – Flanges and their joints – Gaskets for class-designated flanges – Part 6: Covered serrated metal gaskets for use with steel flanges EURO 87.90

DIN EN 13096: 2004 – Transportable gas cylinders – Conditions for filling gases into receptacles – Single-component gases EURO 123.30

DIN EN 13099: 2004 – Transportable gas cylinders – Conditions for filling gas mixtures into receptacles EURO 116.00

DIN EN 14141: 2004 – Valves for natural gas transportation in pipelines – Performance requirements and tests
Supersedes DIN 3437: 1990 Edn., and parts of DIN 3230-5: 1984 Edn. EURO 130.10

DIN EN 14419: 2004 – District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Surveillance systems EURO 116.00

DIN EN ISO 15875-1: 2004 – Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 1: General
This standard, together with DIN 4726: 2000 Edn., DIN EN ISO 15875-2, DIN EN ISO 15875-3 and DIN EN ISO 15875-5: 2004 Edns., supersedes DIN 4729: 1993 Edn. EURO 87.90

DIN EN ISO 15875-2: 2004 – Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 2: Pipes
This standard, together with DIN 4726: 2000 Edn., DIN EN ISO 15875-1, DIN EN ISO 15875-3 and DIN EN ISO 15875-5: 2004 Edns., supersedes DIN 4729: 1993 Edn. EURO 94.70

DIN EN ISO 15875-3: 2004 – Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 3: Fittings
This standard, together with DIN 4726: 2000 Edn., DIN EN ISO 15875-1, DIN EN ISO 15875-2 and DIN EN ISO 15875-5: 2004 Edns., supersedes DIN 4729: 1993 Edn. EURO 94.70

DIN EN ISO 15875-5: 2004 – Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 5: Fitness for purpose of the system
This standard, together with DIN 4726: 2000 Edn., DIN EN ISO 15875-1 to DIN EN ISO 15875-3: 2004 Edns., supersedes DIN 4729: 1993 Edn. EURO 80.60

DIN EN ISO 15876-1: 2004 – Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 1: General
This standard, together with DIN 4726: 2000 Edn., DIN EN ISO 15876-2, DIN EN ISO 15876-3 and DIN EN ISO 15876-5: 2004 Edns., supersedes DIN 4727: 1988 Edn. EURO 87.90

DIN EN ISO 15876-2: 2004 – Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 2: Pipes
This standard, together with DIN 4726: 2000 Edn., DIN EN ISO 15876-1, DIN EN ISO 15876-3 and DIN EN ISO 15876-5: 2004 Edns., supersedes DIN 4727: 1988 Edn. EURO 102.30

DIN EN ISO 15876-3: 2004 – Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 3: Fittings
This standard, together with DIN 4726: 2000 Edn., DIN EN ISO 15876-1, DIN EN ISO 15876-2 and DIN EN ISO 15876-5: 2004 Edns., supersedes DIN 4727: 1988 Edn. EURO 94.70

DIN EN ISO 15876-5: 2004 – Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 5: Fitness for purpose of the system
This standard, together with DIN 4726: 2000 Edn., DIN EN ISO 15876-1 to DIN EN ISO 15876-3: 2004 Edns., supersedes DIN 4727: 1988 Edn. EURO 80.60

DIN EN ISO 15877-1: 2004 – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) – Part 1: General EURO 87.90

DIN EN ISO 15877-2: 2004 – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) – Part 2: Pipes EURO 94.70

DIN EN ISO 15877-3: 2004 – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) – Part 3: Fittings EURO 109.30

DIN EN ISO 15877-5: 2004 – Plastics piping systems for hot and cold water installations – Chlorinated poly (vinyl chloride) (PVC-C) – Part 5: Fitness for purpose of the system EURO 80.60

DIN EN 14177: 2004 – Foodstuffs – Determination of patulin in clear and cloudy apple juice and puree HPLC method with liquid/liquid partition clean-up EURO 94.70

DIN EN 14338: 2004 – Paper and board intended to come into contact with foodstuffs – Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant EURO 65.50

DIN ISO 10110-14: 2004 – Optics and optical instruments – Preparation of drawings for optical elements and systems – Part 14: wavefront deformation tolerance EURO 84.60

DIN EN ISO 12100-1: 2004 – Safety of machinery – Basic concepts, general principles for design – Part 1: Basic terminology, methodology
Supersedes DIN EN 292-1: 1991 Edn. EURO 130.10

DIN EN ISO 12100-2: 2004 – Safety of machinery – Basic concepts, general principles for design – Part 2: Technical principles
Supersedes DIN EN 292-2: 1995 Edn. EURO 130.10

DIN EN 13727: 2004 – Chemical disinfectants and antiseptics – Quantitative suspension test of the evaluation of bactericidal activity of chemical disinfectants for instruments used in the medical area – Test method and requirements (phase 2, step 1) EURO 130.10

DIN EN 13976-1: 2004 – Rescue systems – Transportation of incubators – Part 1: Interface conditions
This standard, together with DIN EN 13976-2: 2004 Edn., supersedes DIN 13072: 1997 Edn. EURO 80.60

DIN EN 13976-2: 2004 – Rescue systems – Transportation of incubators – Part 2: System requirements
This standard, together with DIN EN 13976-1: 2004 Edn., supersedes DIN 13072: 1997 Edn. EURO 102.30

DIN EN ISO 15607: 2004 – Specification and qualification of welding procedures for metallic materials – General rules
Supersedes DIN EN 288-1: 1997 Edn. EURO 94.70

DIN EN ISO 15611: 2004 – Specification and qualification of welding procedures for metallic materials – Qualification based on previous welding experience
Supersedes DIN EN 288-6: 1994 Edn. EURO 65.60

DIN EN ISO 17834: 2004 – Thermal spraying coatings for protection against corrosion and oxidation at elevated temperatures EURO 72.70

DIN EN 13557: 2004 – Cranes – Controls and control stations EURO 102.30

DIN 1027: 2004 – Bars made of hot rolled steel Zee sections with rounded roots and toes – Dimensions, mass and static parameters EURO 58.70

DIN 59231: 2003 – Hot-dip metal coated corrugated and profiled steel sheets – Dimensions, mass and static parameters EURO 58.70

DIN EN ISO 18265: 2004 – Metallic materials – Conversion of hardness values
Supersedes DIN 50150: 2000 Edn. EURO 178.50

DIN EN ISO 9831: 2004 – Animal feeding stuffs, animal products, and faeces or urine – Determination of gross calorific value – Bomb calorimeter method EURO 116.00

DIN EN 13487: 2004 – Heat exchangers – Forced convection air-cooled refrigerant condensers and dry coolers – Sound measurement EURO 94.70

DIN EN 1468: 2004 – Natural stone – Rough slabs – Requirements EURO 87.90

DIN EN ISO 4628-10: 2004 – Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 10: Assessment of degree of filiform corrosion EURO 72.70

DIN EN 14078: 2004 – Liquid petroleum products – Determination of fatty acid methyl esters (FAME) in middle distillates – Infrared spectroscopy method EURO 65.60

DIN 59051: 2004 – Bars made of hot rolled square-edged steel T sections – Dimensions and mass EURO 58.70

DIN EN ISO 3175-4: 2004 – Textiles – Professional care, dry-cleaning and wet-cleaning of fabrics and garments – Part 4: Procedure for testing performance when cleaning and finishing using simulated wet-cleaning EURO 87.90

DIN EN 14288: 2004 – Leather – Physical and mechanical tests – Determination of fogging characteristics EURO 87.90

DIN EN 14289: 2004 – Leather – Physical and mechanical tests – Determination of water penetration pressure EURO 65.60

DIN EN 14327: 2004 – Leather – Physical and mechanical tests – Determination of abrasion resistance of automotive leather EURO 65.60

DIN EN ISO 8849: 2004 – Small craft – Electrically-operated direct-current bilge pumps
Supersedes DIN EN 28849: 1993 Edn. EURO 65.60

DIN EN 10332: 2004 – Magnetic materials – Permanent magnet (Magnetically hard) materials – Methods of measurement of magnetic properties
Supersedes DIN 50470: 1980 Edn. EURO 102.30

DIN EN 14010: 2004 – Safety of machinery – Equipment for power-driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages EURO 148.90

IEC 60071-4 Ed. 1.0 (2004-06) - Insulation co-ordination - Part 4: Computational guide to insulation co-ordination and modelling of electrical networks
Gives guidance on conducting insulation co-ordination studies which propose internationally recognized recommendations
- for the numerical modelling of electrical systems, and
- for the implementation of deterministic and probabilistic methods adapted to the use of numerical programmes.
Its object is to give information in terms of methods, modelling and examples, allowing for the application of the approaches presented in IEC 60071-2, and for the selection of insulation levels of equipment or installations, as defined in IEC 60071-1. SFr. 249.00

IEC 60076-11 Ed. 1.0 (2004-05)-Power transformers - Part 11: Dry-type transformers
Applies to dry-type power transformers (including auto-transformers) having values of highest voltage for equipment up to and including 36 kV and at least one winding operating at greater than 1,1 kV. Applies to all construction technologies. SFr. 129.00

IEC 60269-2-1 Ed. 4.0 (2004-06) - Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
This standard is divided into six sections, each dealing with a specific example of standardized fuse for use by authorized persons:
Section I: Fuses with fuse-links with blade contacts.
Section II: Fuses with fuse-links for bolted connections.
Section III: Fuses with fuse-links having cylindrical contact caps.
Section IV: Fuses with fuse-links with offset blade contacts.
Section V: Fuses with fuse-links having "gD" and "gN" characteristics.
Section VI: "gV" fuse-links with wedge tightening contacts.
NOTE - The following fuse systems are standardized systems in respect to their safety aspects. SFr. 265.00

IEC 60439-4 Ed. 2.0 (2004-06) - Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Applies to type-tested ASSEMBLIES (TTA) intended for use on construction sites, i.e. temporary places of work to which the public do not generally have access and where building construction, installation, repairs, alteration or demolition of property (buildings) or civil engineering (public works) or excavation or any other similar operations are carried out. These ASSEMBLIES may be transportable (semi-fixed) or mobile. This standard does not apply to ASSEMBLIES for use in the administrative centres of construction sites (offices, cloakrooms, ASSEMBLY rooms, canteens, restaurants, dormitories, toilets, etc.). The nominal primary voltage and the nominal secondary voltage of transformers incorporated in ACS shall be within the limits specified in IEC 60439-1. Requirements for electrical protection provided by equipment manufactured according to this International Standard shall comply with the requirements given in IEC 60364-7-704. NOTE: This standard may be used as a guide to partially type-tested ASSEMBLIES (PTTA) constructed according to agreement between manufacturer and user taking into account the nature of supply and/or distribution network and relevant installation requirements. The following major changes with respect to edition 1 (including amendments 1 and 2) have been incorporated:
- introduction of the definition for "rated current of ACS";
- replacement of classification based on the rated current of ACS by classification based on the function as assigned by the manufacturer;
- amended requirements for the protection of socket-outlets with reference to the more comprehensive requirements of IEC 60364-7-704;
- introduction of common requirements for all types of ACS. SFr. 81.00

IEC 60811-4-1 Ed. 2.0 (2004-06) - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
Specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric and optical fibre cables for power distribution and telecommunications, including cables used on ships and in offshore applications. These test methods apply specifically to PE and PP compounds, including cellular compounds and foam skin for insulation. The principal changes with respect to the previous edition are listed below: a) the wrapping test after thermal ageing in air is deleted from this part of IEC 60811. It is now given only in IEC 60811-4-2; b) a thermogravimetric method is added for determination of carbon black content; c) a method is introduced for assessment of carbon black dispersion. SFr. 99.00

IEC 60851-5 Amd.2 Ed. 3.0 (2004-06) - Amendment 2 - Winding wires - Test methods - Part 5 : Electrical properties SFr. 49.00

IEC 60927 Amd.2 Ed. 2.0 (2004-06) - Amendment 2 - Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements SFr. 22.00

IEC 61347-2-3 Amd.1 Ed. 1.0 (2004-06) - Amendment 1 - Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps SFr. 49.00

CISPR 16-1-2 Ed. 1.1 (2004-06) - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances SFr. 199.00

IEC 61338-2 Ed. 1.0 (2004-05) - Waveguide type dielectric resonators - Part 2: Guidelines for oscillator and filter applications
Contains guidelines for use of waveguide type dielectric resonators that are used for oscillator and filter applications. The applications are oscillators for direct broadcasting or communication satellite systems, oscillators for radio links, voltage-controlled oscillators for mobile communication systems and so on. SFr. 119.00

IEC 62257-2 Ed. 1.0 (2004-05)- Recommendations for small renewable energy and hybrid systems for rural electrification - Part 2: From requirements to a range of electrification systems
Proposes a methodological approach for the setting up and carrying out of socio-economic studies as part of the framework of decentralized rural electrification projects. Also provides some structures as technical solutions that could be recommended, depending on the qualitative and quantitative energy demands, consistent with the needs and financial situation of the customers. Proposes electrical architectures to technical project managers to assist them in the design of the systems. SFr. 199.00

IEC 60312 Ed. 3.2 (2004-05) - Vaccum cleaners for household use - Methods of measuring the performance
States and defines the principal performance characteristics of vacuum cleaners which are of interest to the user and describes the standard methods for measuring these characteristics. SFr. 199.00

IEC 60619 Amd.2 Ed. 2.0 (2004-06) - Amendment 2 - Electrically operated food preparation appliances - Methods for measuring the performance SFr. 21.00

IEC 60085 Ed. 3.0 (2004-06) - Electrical insulation - Thermal classification
Gives guidance on the application of international standards in assigning a thermal class to electrical insulating materials (EIM) or simple combinations of such materials (IEC 60216-1), to electrical insulation systems (IEC 62114) and to insulation for electrical devices. This new edition distinguishes between thermal classes for electrical insulation systems and electrical insulating materials. SFr. 37.00

IEC 60371-2 Ed. 3.0 (2004-06) - Specification for insulating materials based on mica - Part 2: Methods of test
Defines the methods of test which are applicable to built-up mica materials, products based on them and mica paper. The main changes from the previous edition are as follows:
a) All clauses re-numbered.
b) Relevant template of ISO 67 has been added to this standard as Annex A.
c) Clause 8: Tensile strength and elongation at break Procedure modified to give "rate of movement" instead of "time limit". Different rate of movement for raw mica as opposed to reinforced and/or impregnated mica.
d) Clause 11: Stiffness Size of test specimen revised. Wording modified so that standard covers materials using carriers other than woven glass cloth and materials that are 3-ply. Revision of terms "machine direction" and "transverse direction". (These were incorrect in second edition (1987).)
e) Clause 13: Elastic compression and plastic compression Tolerance on measurement of height of stack changed to within 0,01 mm. Times for change in pressure in procedure changed to 1 min.
f) Clause 16: Electric strength Modified in line with Amendment 1 (1994) to the second edition (1987). Changes relate to latest edition of IEC 60243-1.
g) Clause 19: Detection of defects and conductive particles Revised subclause. SFr. 109.00

IEC 60641-2 Ed. 2.0 (2004-06) - Pressboard and presspaper for electrical purposes - Part 2: Methods of tests
Applies to pressboard and presspaper for electrical purposes. The series does not apply to laminated material. This part specifies the test methods to be used in testing pressboard and presspaper for electrical purposes to meet the requirements prescribed in the specification sheets of Part 3. NOTE In this standard, reference is made in several places to ISO standards accompanied by a short description of the method used. It is to be understood that this short description is meant for identification purposes only and that all details should be taken from the ISO standard itself. The main changes with respect to the previous edition are listed below:

The following test methods have been cancelled:
- Flexibility
- Conductivity of the organic extract
- Contamination of liquid dielectrics
The following test methods have been rewritten:
- Compressibility
- Conductivity of the aqueous extract
- Cohesion between plies
The following test method has introduced:
- Determination of metallic particles with X-ray.
SFr. 109.00

IEC 60695-7-1 Ed. 2.0 (2004-05) - Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
Provides guidance on the factors which affect the toxic hazard from fires involving electrotechnical products, and provides information on the methodologies recommended by ISO TC 92 (SC 3) for estimating and reducing toxic hazard from fires, as expressed in ISO/TR 9122 (Parts 1 to 6), ISO 13344 and ISO/TS 13571. There is no single test to realistically assess toxic hazard in fires. Small-scale toxic potency tests are not capable on their own of assessing fire hazard. Current toxicity tests attempt to measure the toxic potency of a laboratory generated fire effluent. Toxic potency should not be confused with toxic hazard. Although the structure of this standard remains essentially the same, the main changes with respect to the previous edition are listed below: - Introduction: an explanation concerning the publication of IEC 60695-7-50, a small-scale toxicity test method, reference to IEC 60695-7-51 which covers the calculation and interpretation of test results, an explanation of the alignment with ISO/TC 92 Fire safety. - The expansion of the scope further clarifies the subject matter and alignment with ISO/TC 92, in particular ISO 13344 and ISO/TS 13571. - Formulae are given for the calculation of the fraction of the incapacitating dose for each of the asphyxiants, carbon monoxide and hydrogen cyanide. - Volume fractions that are expected to cause incapacitation (F values) are given for some of the more important irritants. - The definitions have been greatly expanded and updated. - The subclause on factors determining toxic hazard has been expanded. - New subclauses include general aspects of small-scale test methods, evaluation of test methods and the relevance of toxic hazard data to hazard assessment. - A flowchart has been added to outline the stages to be followed for test method assessment. Has the status of a basic safety publication in accordance with IEC Guide 104. SFr. 89.00

IEC 61481 Ed. 1.2 (2004-06) - Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
Is applicable to portable phase comparators with or without a built-in power source to be used on electrical systems for voltages from 1 kV to 36 kV a.c. and frequencies from 50 Hz to 60 Hz. This standard is applicable to two-pole phase comparators having a connecting lead between them, two-pole phase comparators operating with a wireless connection and single-pole phase comparators operating with a memory system. This standard is applicable to phase comparators used in contact with the part to be tested, as a single unit or as a separate device completed by an adaptable insulating pole covered in IEC 60855 or IEC 61235. SFr. 169.00

IEC 61753-091-3 Ed. 1.0 (2004-05)- Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single mode fibre optic pigtailed style circulators for category U - Uncontrolled environment
Contains the minimum requirements and severities which a fibre optic circulator shall satisfy in order to be categorised as meeting the requirements of circulator devices used in uncontrolled environments. The requirements cover non-connectorised single mode circulators for category U - Uncontrolled environments. SFr. 53.00