ASTM Standards

Advanced Ceramics

ASTM C 1368 : 2001 - Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Flexural Testing Ambient Temperature (R)

Aerospace and Aircraft

ASTM F 2078 : 2001 - Terminology Relating to Hydrogen Embrittlement Testing

Analytical Chemistry for Metals, Ores and Related Materials

ASTM E 135 : 2001 - Terminology Relating to Analytical Chemistry of Metals Ores and Related Materials (R)

ASTM E 1915 : 2001 - Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry (R)

Aromatic Hydrocarbons and Related Chemicals

ASTM D 5211 : 2001 - Specification for Xylenes for p-Xylene Feedstock (R)

ASTM D 5606 : 2001 - Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock (R)

ASTM D 6069 : 2001 - Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection (R)

Building Seals and Sealants

ASTM C 639 : 2001 - Test Method for Rheological Flow Properties of Elastomeric Sealants (R)

ASTM C 717 : 2001a - Terminology of Building Seals and Sealants (R)

ASTM C 732 : 2001 - Test Method for Aging Effects of Artificial Weathering on Latex Sealants (R)

ASTM C 734 : 2001 - Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering (R)

ASTM C 794 : 2001 - Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants (R)

ASTM C 961 : 2001 - Test Method for Lap Shear Strength of Hot-Applied Sealants (R)

ASTM C 1021 : 2001 - Practice for Laboratories Engaged in Testing of Building Sealants (R)

ASTM C 1127 : 2001 - Guide for Use of High Solids Content Cold Liquid Applied Elastomeric Waterproofing Memberane with an Integral Wearing Surface (R)

ASTM C 1294 : 2001 - Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid Applied Glazing Materials (R)

ASTM C 1367 : 2001 - Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear (R)

ASTM D 2203 : 2001 - Test Method for Staining from Sealants (R)

ASTM D 2249 : 2001 - Test Method for Predicting Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash (R)

Color and Appearance

ASTM E 284 : 2000 - Terminology of Appearance (R)

Consumer Products

ASTM F 1967 : 2001 - Consumer Safety Specification for Infant Bath Seats (R)

ASTM F 2089 : 2001 - Guide for Language Interpretation Services

Copper and Copper Alloys

ASTM B 96/B 96M : 2001 - Specification for Copper-Silicon Alloy Plate Sheet, Strip and Rolled Bar for General Purposes and Pressure Vessels (R)

Chemical-Resistant Nonmetallic Materials

ASTM C 413 : 2001 - (Includes change to title) Test Method for Absorption of Chemical Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes (R)

ASTM C 1147 : 2001 - Practice for Determining the Short Term Tensile Weld Strength of Chemical Resistant Thermoplastics (R)

Electrical and Electronic Insulating Materials

ASTM D 2520 : 2001 - Test Methods for Complex Permittivity Dielectric Constant of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 ºC (R)

ASTM D 6097 : 2001 - Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials (R)

Electrical Insulating Liquids and Gases

ASTM D 3635 : 2001 - (Includes change to title) Test Method for Dissolved Copper in Electrical Insulating Oil by Atomic Absorption Spectrophotometry (R)

Electrical Protective Equipment for Workers

ASTM F 1505 : 2001 - Specification for Insulated and Insulating Hand Tools (R)

Engine Coolants

ASTM D 6660 : 2001 - Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

Fasteners

ASTM F 959 : 2001 - Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners (R)

ASTM F 959M : 2001 - Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners [Metric] (R)

Flexible Barrier Materials

ASTM F 2013 : 2001 - Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame lionization Detector (R)

ASTM F 2095 : 2001 - Test Methods for Pressure Decay Leak Test for Nonporous Flexible Packages with and without Restraining Plates

Geosynthetics

ASTM D 6637 : 2001 - Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

Gypsum and Related Building Materials and Systems

ASTM C 474 : 2001 - Test Methods for Joint Treatment Materials for Gypsum Board Construction (R)

Manufactured Masonry Units

ASTM C 67 : 2001 - Test Methods for Sampling and Testing Brick and Structural Clay Tile (R)

Metallic-Coated Iron and Steel Products

ASTM A 90/A 90M : 2001 - Test Method for Weight Mass of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coating (R)

ASTM A 428/A 428M : 2001 - Test Method for Weight Mass of Coating on Aluminum-Coated Iron or Steel Artcles (R)

ASTM A 760/A 760M : 2001 - Specification for Corrugated Steel Pipe, Metallic Coated for Sewers and Drains (R)

ASTM A 780 : 2001 - Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings (R)

ASTM A 798/A 798M : 2001 - Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications (R)

ASTM A 824 : 2001 - Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence (R)

ASTM A 875/A 875M : 2001 - Specification for Steel Sheet Zinc-5 Aluminum Alloy-Coated by the Hot-Dip Process (R)

Molecular Spectroscopy

ASTM E 2143 : 2001 - Practice for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons

Nonferrous Metals and Alloys

ASTM B 163 : 2001 - Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes (R)

ASTM B 522 : 2001 - Specification for Gold-Silver-Platinum Electrical contact Alloy (R)

ASTM B 541 : 2001 - Specification for Gold Electrical Contact Alloy (R)

ASTM B 683 : 2001 - Specification for Pure Palladium Electrical Contact Material (R)

ASTM B 685 : 2001 - Specification for Palladium-Copper Electrical Contact Material (R)

ASTM B 860 : 2001 - Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing (R)

Packaging

ASTM D 999 : 2001 - Test Methods for Vibration Testing of Shipping Containers (R)

ASTM D 6653 : 2001 - Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method

ASTM D 6654 : 2001 - Test Method for Basic Storage Stability of a Mechanical Pump Dispenser

Paint and Related Coatings Materials and Applications

ASTM D 280 : 2001 - Test Methods for Hygroscopic Moisture and Other Matter Volatile Under the Test Conditions in Pigments (R)

ASTM D 3003 : 2001 - Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates (R)

ASTM D 3021 : 2001 - Specification for Phthalocyanine Green Pigments (R)

ASTM D 5065 : 2001 - Guide for Assessing the Condition of Aged Coatings on Steel Surfaces (R)

ASTM D 5137 : 2001 - Specification for Hexyl Acetate (R)

ASTN D 6686 : 2001 - Test Method for Evaluation of Tannin Stain Resistance of Coatings

ASTM D 6687 : 2001 - Guide for Testing Printing Ink Vehicles and Components Thereof

ASTM D 6688 : 2001 - Test Method for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Method

Performance of Building

ASTM E 833 : 2001 - Terminology of Building Economics (R)

ASTM E 1605 : 2001 - Terminology Relating to Lead in Buildings (R)

ASTM E 2151 : 2001 - Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings

Petroleum Products and Lubricants

ASTM D 2007 : 2001 - Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum Derived Oils by the Clay Gel Absorption Chromatographic Method (R)

ASTM D 6623 : 2001 - Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography

Plastics

ASTM D 1042 : 2001a - Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions (R)

ASTM D 1603 : 2001 - Test Method for Carbon Black in Olefin Plastics (R)

ASTM D 1894 : 2001 - Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and
Sheeting (R)

ASTM D 4000 : 2001 - Classification System for Specifying Plastic Meterials (R)

ASTM D 4066 : 2001 - Classification System for Nylon Injection and Extrusion Materials PA (R)

ASTM D 6645 : 2001 - Test Method for Methyl Comonomer Content in Polyethylene by Infrared Spectrophotometry

ASTM D 6662 : 2001 - Specification for Polyolefin-Based Plastic Lumber Decking Boards

Plastic Piping Systems

ASTM D 2466 : 2001 - Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 40 (R)

ASTM D 2467 : 2001 - Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 (R)

ASTM D 2661 : 2000 - Specification for Acrylonitrile-Butadiene-Styrene ABS Schedule 40 Plastic Drain Waste, and Vent Pipe and Fittings (R)

ASTM F 438 : 2001 - Specification for Socket-Type Chlorinated Poly(Vinyl Chloride)(CPVC) Plastic Pipe Fittings Schedule 40 (R)

ASTM F 439 : 2001 - Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 (R)

ASTM F 810 : 2001 - Specification for Smoothwall Polyethylene PE Pipe for Use in Drainage and Waste Disposal Absorption Fields (R)

ASTM F 913 : 2001 - Specification for Thermoplastic Elastomeric Seals Gaskets for Joining (R)

ASTM F 1412 : 2001 - Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems (R)

ASTM F 1563 : 1994 - Specification for Tools to Squeeze-Off Polyethylene PE Gas Pipe of Tubing (R)

ASTM F 1970 : 2001 - (Includes change to title), Specification for Special Engineered Fittings Appurtenances or Valves for Use in Poly(Vinyl Chloride) (PVC) or Chlorinated Poly Vinyl Chloride Cpvc Systems (R)

ASTM F 1974 : 2001 - Specification for Metal Insert Fittings for Polyethylene/Aluminum/ Polyethylene and Crosslinked Polyethylene/Aluminum/ Crosslinked Polyethylene Composite Pressure (R)

Steel, Stainless Steel and Related Alloys

ASTM A 182/A 182M : 2001 - Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High Temperature Service (R)

ASTM A 213/A 213M : 2001 - Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater and Heat-Exchanger Tubes (R)

ASTM A 268/A 268M : 2001 - Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service (R)

ASTM A 335/A 335M : 2001 - Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service (R)

ASTM A 813/A 813M : 2001 - Specification for Single-or Double-Welded Austenitic Stainless Steel Pipe (R)

ASTM A 814/A 814M : 2001 - Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe (R)

Thermal Insulation

ASTM C 1289 : 2001 - Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board (R)

ASTM C 1497 : 2001 - Specification for Cellulosic Fiber Stabilized Thermal Insulation

Thermal Measurements

ASTM E 1461 : 2001 - Test Method for Thermal Diffusivity by the Flash Method (R)

BSI Standards

The publications listed below are new and revised British Standards and new editions of British Standards

Building and Civil Engineering

BS 1722 : Fences

BS 1722-14 : 2001 - Specification for open mesh steel panel fences

Supersedes BS 1722-14 : 1992       £ 59.00

BS 5628:- Code of practice for use of masonry

BS 5628-3 : 2001 - Materials and components, design and workmanship

Supersedes BS 5628-3 : 1985 and BS 5390 : 1976                                              £ 124.00

BS 5950 :- Structural use of steelwork in building

BS 5950-2 : 2001 - Specification for materials fabrication and erection - Rolled and
welded sections

Supersedes BS 5950-2 : 1992                     £ 72.00

BS 6717 : 2001 - Precast unreinforced concrete paving blocks - Requirements and
test methods

Supersedes BS 6717-1 : 1993                     £ 72.00

BS 7263:- Precast concrete flags kerbs, channels, edgings and quadrants

BS 7263-1 : 2001 - Precast, unreinforced concrete paving flags and complementary
fittings - Requirements and test methods with BS 7263-3 : 2001
supersedes BS 7263-1 : 1994 £ 72.00

BS 7263-3 : 2001 - Precast unreinforced concrete kerbs, channels, edgings and
quadrants - Requirements and test methods  with BS 7263-1 : 2001
supersedes BS 7263-1 : 1994  £ 7200

BS 8000:- Workmanship on building sites

BS 8000-3 : 2001 - Code of practice for masonry

Supersedes BS 8000-3 : 1989  £ 72.00

BS EN 934:- Admixtures for concrete mortar and grout

BS EN 934-2 : 2001 - Concrete admixtures - Definitions, requirements, conformity
marking and labelling

Supersedes BS EN 934-2 : 1997            £ 59.00

BS EN 934-4 : 2001 - Admixtures for prestressing tendons - Definitions, requirements,
conformity, marking and labeling

Supersedes BS EN 934-4 : 2000                       £ 45.00

BS EN 934-6 : 2001 – Sampling conformity control and evaluation of conformity

Supersedes BS EN 934-6 : 2000                £ 32.00

BS EN 998:- Specification for mortar for masonry

BS EN 998-2 : 2001 - Masonry mortar                                £ 45.00

BS EN 1897 : 2001 - Geotextiles and geotextile related products - Determination of the
compressive creep properties

Supersedes DD ENV 1897 : 1996  £ 45.00

BS EN 12839 : 2001 - Precast concrete products - Elements for fences   £ 85.00

BS EN 13051 : 2001 - Curtain walling - Watertightness - Site test                       £ 32.00

BS EN 13115 : 2001 - Windows - Classification of mechanical properties – Racking
torsion and operating forces                                                     £ 32.00

BS EN 13116 : 2001 - Curtain walling - Resistance to wind load – Performance
requirements                               £ 32.00

BS EN 13369 : 2001 - Common rules for precast concrete products                        £ 90.00

Consumer Products andServices

BS EN 862 : 2001 - Packaging - Child-resistant packaging - Requirements and testing
procedures for non-reclosable packages for non-pharmaceutical products

Supersedes BS EN 862 : 1997              £ 59.00

BS EN ISO 90:- Light gauge metal containers - Definitions and determination of dimensions
and capacities

BS EN ISO 90-3 : 2001 - Aerosol cans

Supersedes BS EN 20090-3 : 1993    £ 59.00

BS EN ISO 1211 : 2001 (also numbered as BS 1741-3 : 2001)- Milk - Determination of fat
content - Gravimetric method (Reference method)

Supersedes BS EN ISO 1211 : 1995    £ 59.00

BS EN ISO 2233 : 2001 - Packaging - Complete, filled transport packages and unit loads -
Conditioning for testing

Supersedes BS EN ISO 2233 : 1999                                                                   £ 32.00

BS EN ISO 5436:- Geometrical product specification (GPS) - Surface texture – Profile
method - Measurement standards

BS EN ISO 5436-1 : 2001 - Material measures                                              £ 59.00

BS EN ISO 10360:- Geometrical product specifications (GPS) - Acceptance and reverification
tests for coordinate measuring machines (CMM)

BS EN ISO 10360-1 : 2001 - Vocabulary                                                         £ 90.00

BS EN ISO 10360-3 : 2001 - CMMs with the axis of a rotary table as the fourth axis                     £ 59.00

BS EN ISO 10360-5 : 2001 - CMMs using multiple-stylus probing systems         £ 59.00

BS EN ISO 12179 : 2001 - Geometrical product specification (GPS) - Surface texture -
Profile method - Calibration of contact (stylus) instruments                                         £ 59.00

Electrotechnical

BS EN 1986:- Electrically propelled road vehicles - measurement of energy performances

BS EN 1986-2 : 2001 - Thermal electric hybrid vehicles                                                              £ 59.00

BS EN ISO 13444:- Electrically propelled road vehicles - Measurement of emissions of
hybrid vehicles

BS EN 13444-1 : 2001 - Thermal electric hybrid vehicles                                                   £ 59.00

BS EN 13447 : 2001 - Electrically propelled road vehicles - Terminology                           £ 45.00

BS EN 50155 : 2001 - Railway applications - Electronic Equipment used on rolling stock   £ 85.00

BS EN 50272 :- Safety requirements for secondary batteries and battery
installations

BS EN 50272-2 : 2001 - Stationary batteries                                                £ 72.00

BS EN 50289:- Communication cables - Specifications for test methods

BS EN 50289-3-1 : 2001 - Mechanical test methods - General requirements                       £ 32.00

BS EN 50342 : 2001 - Lead-acid starter batteries - General requirements methods of test
and numbering

Supersedes BS EN 60095-1 : 1993              £ 59.00

BS EN 50360 : 2001 - Product standard to demonstrate the compliance of mobile
phones with the basic restrictions related to human exposure to
electromagnetic fields (300 MHz - 3 GHz)                                               £ 32.00

BS EN 50361 : 2001 - Basic standard for the measurement of Specific Absorption Rate
related to human exposure to electromagnetic fields from mobile
phones (300 MHz - 3 GHz)                                                              £ 90.00

BS EN 60076:- Power transformers

BS EN 60076-10 : 2001 - Determination of sound levels

Supersedes BS EN 60551 : 1993              £ 72.00

BS EN 60191:- Mechanical standardization of semiconductor devices

BS EN 60191-6-6 : 2001 - General rules for the preparation of outline drawings of
surface mounted semiconductor device packages - Design guide for fine pitch land
grid array (FLGA)                                £ 45.00

BS EN 60317:- Specifications for particular types of winding wires

BS EN 60317-0-6 : 2001 - General requirements - Glass-fibre wound resin or varnish
impregnated bare or enamelled round copper wire                                           £ 45.00

BS EN 60322 : 2001 - Railway applications - Electric equipment for rolling stock -
Rules for power resistors of open construction

Supersedes BS 4846 : 1972                      £ 59.00

BS EN 61643:- Low voltage surge protective devices

BS EN 61643-21 : 2001 - Surge protective devices connected to telecommunications
and signalling networks - Performance requirements and testing methods £ 90.00

BS EN 61851:- Electric vehicle conductive charging systems

BS EN 61851-1 : 2001 - General requirements                                                           £ 72.00

BS EN 61951:- Secondary cells and batteries containing alkaline or other non-acid
electrolytes - Portable sealed rechargeable single cells

BS EN 61951-1 : 2001 - Nickel-cadmium       £ 72.00

BS EN 61951-2 : 2001 - Nickel-metal hydride                                                            £ 59.00

BS EN 62005:- Reliability of fibre optic interconnecting devices and passive
components

BS EN 62005-1 : 2001 - Introductory guide and definitions                                              £ 45.00

Engineering

BS EN 280 : 2001 - Mobile elevating work platforms - Design calculations - Stability criteria -
Construction - Safety - Examinations and tests

Supersedes BS 7171 : 1989                    £ 101.00

BS EN 617 : 2001 - Continuous handling equipment and systems - Safety and EMC
requirements for equipment for the storage of bulk materials in silos bunkers
bins and hoppers                                                    £ 85.00

BS EN 693 : 2001 - Machine tools - Safety - Hydraulic presses                                      £ 85.00

BS EN 1797 : 2001 - Cryogenic vessels - Gas/material compatibility                              £ 45.00

BS EN 10002:- Metallic materials - Tensile testing

BS EN 10002-1 : 2001 - Method of test at ambient temperature

Supersedes BS EN 10002-1 : 1990                                                                         £ 90.00

BS EN 10225 : 2001 - Weldable structural steels for fixed offshore structures -
Technical delivary conditions

Supersedes BS 7191 : 1989                    £ 101.00

BS EN 12012:- Rubber and plastics machines - Size reduction machines

BS EN 12012-2 : 2001 - Safety requirements for strand pelletisers                                             £ 59.00

BS EN 12312:- Aircraft ground support equipment - Specific requirements

BS EN 12312-1 : 2001 - Passenger stairs                                                      £ 45.00

BS EN 12417 : 2001 - Safety of machine tools - Machining centers £ 85.00

BS EN 12750 : 2001 - Safety of woodworking machines - four-sided moulding machines       £ 85.00

BS EN 12957 : 2001 - Machine tools - Safety - Electro discharge machines       £ 72.00

BS EN 12975:- Thermal solar systems and components - Solar collectors

BS EN 12975-2 : 2001 - Test methods        £ 124.00

BS EN 13348 : 2001 - Copper and coppe alloys - Seamless, round copper tubes for
medical gases or vacuum                                                      £ 45.00

BS EN 13410 : 2001 - Gas fired overhead radiant heaters - Ventilation requirements for
non-domestic premises                                               £ 32.00

BS EN 13573 : 2001 - Inland navigation vessels - Anchoring coupling towing, hauling
and mooring systems                                                      £ 32.00

BS EN 13574 : 2001 - Inland navigation vessels - Permanently installed climbing
devices with a length not exceeding 5 m                                    £ 45.00

BS EN ISO 7291 : 2001 - Gas welding equipment - Pressure regulators for manifold
systems used in welding, cutting and allied processes up to 300 bar

Supersedes BS EN 961 : 1996                 £ 59.00

BS EN ISO 9454:- Soft soldering fluxes - Classification and requirements

BS EN ISO 9454-2 : 2001 - Performance requirements                                 £ 45.00

BS EN ISO 9556 : 2001 - Steel and iron - Determination of total carbon content – Infrared
absorption method after combustion in an induction furnace

Supersedes BS 6200-3.8.3 : 1990                                                            £ 45.00

BS EN ISO 10423 : 2001 - Petroleum and natural gas industries - Drilling and production
equipment - Wellhead and christmas tree equipment                   £ 178.00

BS EN ISO 10692:- Gas cylinders - Gas cylinder valve connections for use in the
microelectronics industry

BS EN ISO 10692-2 : 2001 - Specification and type testing for valve to cylinder
connections                               £ 45.00

BS EN ISO 15136:- Downhole equipment for petroleum and natural gas industries -
Progressing cavity pump systems for artificial lift

BS EN ISO 15136-1 : 2001 - Pumps                                                                  £ 72.00

BS EN ISO 15547 : 2001 - Petroleum and natural gas industries - plate heat exchangers    £ 72.00

Health and Environment

BS EN ISO 4135 : 2001 - Anaesthetic and respiratory equipment - Vocabulary

Supersedes BS EN ISO 4135 : 1996              £ 101.00

BS EN ISO 10139:- Dentistry - Soft lining materials for removable dentures

BS EN ISO 10139-2 : 2001 - Materials for long-term use                                                             £ 45.00

Information systems

BS EN ISO 10628 : 2001 - Flow diagrams for process plants - General rules                           £ 90.00

Materials and Chemicals

BS 7982 : 2001 - Guidance on the environmental impact of large scale fires involving
plastics materials                                                £ 72.00

BS EN 985 : 2001 - Textile floor coverings - Castor chair test

Supersedes BS EN 985 : 1995                          £ 32.00

BS EN 12935 : 2001 - Feather and down - Hygiene and cleanliness requirements

Supersedes BS 1425-2 : 1991                           £ 32.00

BS EN 13569 : 2001 - Cabinet roller towels - Performance requirements and processing            £ 45.00

BS EN ISO 2439 : 2001 - Flexible cellular polymeric materials - Determination of
hardness (indentation technique)

Supersedes BS 4443-2 : 1988                           £ 32.00

BS EN ISO 3613 : 2001 - Chromate conversion coatings on zinc, cadmium,
aluminium-zinc alloys and zinc-aluminium alloys - Test methods

Supersedes BS EN ISO 3613 : 1995              £ 45.00

BS EN ISO 4257 : 2001 (Also numbered as BS 2000-477 : 2001) - Methods of test for
petroleum and its products - Liquefied petroleum gases - Method of sampling

Supersedes BS EN ISO 4257 : 1995              £ 17.30

BS EN ISO 5267:- Pulps - Determination of drainability

BS EN ISO 5267-1 : 2001 - Schopper-Riegler method

Supersedes BS 6035-1 : 1981                           £ 45.00

BS EN ISO 8289 : 2001 - Vitreous and porcelain enamels - Low voltage test for detecting
and locating defects

Supersedes BS 1344-20 : 1987                         £ 32.00

BS EN ISO 14896 : 2001 - Plastics - Polyurethane raw materials - Determination of
isocyanate content

Supersedes BS EN ISO 9369 : 1997              £ 45.00

BS EN ISO 14919 : 2001 - Thermal spraying - Wires rods and cords for flame and arc
spraying - Classification - Technical supply conditions     £ 45.00

BS EN ISO 14921 : 2001 - Thermal spraying - Procedures for the application of thermally
sprayed coatings for engineering components                                                 £ 32.00

BS EN ISO 15695 : 2001 - Vitreous and porcelain enamels - Determination of scratch
resistance of enamel finishes                                                                                              £ 32.00

Petroleum Products

BS 2000:- Methods of test for petroleum and its products

BS 2000-456 : 2000 - Determination of potassium in gasoline - Atomic absorption
spectrometry (AAS) method                         £ 17.30

BS 2000-477 : 2001 - Liquefied petroleum gases - Method of sampling                         £ 17.30

DD ENV PUBLICATION

DD ENV 1996:- Eurocode 6 - Design of masonry structures

DD ENV 1996-1-3 : 2001 - General rules for building - Detailed rules on lateral loading
(together with United Kingdom National Application Document)                                          £ 45.00

DD ENV 1996-2 : 2001 - Design, selection of materials and execution of masonry
(together with United Kingdom National Application Document)                                         £ 72.00

DD ENV 1996-3 : 2001 - Simplified calculation methods and simple rules for masonry
(together with United Kingdom National Application Document)                                           £ 59.00

DD ENV 12625:- Tissue paper and tissue products

DD ENV 12625-8 : 2001 - Water absorption time water absorption capacity – Manual
and automated test method                                     £ 18.00

DD ENV 13936 : 2001 - Workplace atmospheres - Measurement of chemical agents
present as mixtures of airborne particles and vapour - Requirements and test methods £ 32.00

DD ENV 14014 : 2001 - Postal services - Hybrid mail - Document type definitions for
suctomer to operator - A common set of default tags                                             £ 72.00

BS IMPLEMENTATIONS

BS IEC 60605:- Equipment reliability testing

BS IEC 60605-4 : 2001 - Statistical procedures for exponential distribution -
Point estimates, confidence intervals, prediction intervals and tolerance intervals        £ 72.00

BS IEC 61241:- Electrical apparatus for use in the presence of combustible dust

BS IEC 61241-4 : 2001 - Type of protection "pD"                                                              £ 59.00

BS IEC 61584 : 2001 - Radiation protection instrumentation - Installed portable or
transportable assemblies - Measurement of air kerma direction and air kerma rate £ 72.00

BS IEC 61882 : 2001 - Hazard and operability studies (HAZOP studies) -
Application guide                                £ 90.00

BS ISO 1202 : 1981 - Essential oils - Determination of 1,8-cineole content          £ 32.00

BS ISO 1241 : 1996 - Essential oils - Determination of ester values before and
after acetylation and evaluation of the contents of free and total alcohols £ 32.00

BS ISO 1268:- Fibre-reinforced plastic - Methods of producing test plates 

BS ISO 1268-5 : 2001 - Filament winding

Supersedes BS ISO 9291 : 1996              £ 45.00

BS ISO 1271 : 1983 - Essential oils - Determination of carbonyl value – Free
hydroxylamine method          £ 32.00

BS ISO 1272 : 2000 - Essential oils - Determination of content of phenols         £ 32.00

BS ISO 1279 : 1996 - Essential oils - Determination of carbonyl value – Potentiometric
methods using hydroxylammonium chloride                      £ 32.00

BS ISO 3715:- Ships and marine technology - Propulsion plants for ships

BS ISO 3715-2 : 2001 - Vocabulary for controllable-pitch propeller plants                                      £ 45.00

BS ISO 3793 : 1976 - Estimation of primary and secondary free alcohols content
by acetylation in pyridine     £ 32.00

BS ISO 3794 : 1976 - Essential oils (containing tertiary alcohols) - Estimation of free
alcohols content by determination of ester value after acetylation                                     £ 32.00

BS ISO 4064:- Measurement of water flow in closed conduits - Meters for cold
potable water

BS ISO 4064-2 ; 2001 - Installation requirements and selection

Supersedes BS 5728-2 : 1980               £ 32.00

BS ISO 4090 : 2001 - Photography - Medical radiographic cassettes/screens/ films and
hard copy imaging films - Dimensions and specifications

Supersedes BS ISO 4090 : 1991                      £ 72.00

BS ISO 4096 : 1978 - Essential oils (containing tertiary alcohols) - Evaluation of free
alcohols content by determination of ester value after cold formylation    £ 32.00

BS ISO 4715 : 1978 - Essential oils - Quantitative evaluation of residue on evaporation      £ 32.00

BS ISO 5991 : 1979 - Essential oils - Determination of residue content from distillation
under reduced pressure        £ 32.00

BS ISO 7660 : 1983 - Essential oils - Determination of ester value of oils containing
difficult-to-saponify esters                                               £ 32.00

BS ISO 8374 : 2001 - Photography - Determination of ISO safelight conditions                                £ 45.00

BS ISO 8432 : 1987 - Essential oils - Analysis by high performance liquid
chromatography - General method                                                 £ 32.00

BS ISO 8529:- Reference neutron radiations

BS ISO 8529-1 : 2001 - Characteristics and methods of production                                        £ 72.00

BS ISO 10071 :- Tools for pressing - Ball-lock punches

BS ISO 10071-1 : 2001 - Ball-lock punches for light duty                                                             £ 45.00

BS ISO 10100 : 2001 - Hydraulic fluid power - Cylinders - Acceptance tests                              £ 32.00

BS ISO/IEC 10967:- Information technology - Language independent arithmetic

BS ISO/IEC 10967-2 : 2001 - Elementary numerical functions                                            £ 133.00

BS ISO 11021 : 1999 - Essential oils - Determination of water content-
Karl Fischer method          £ 32.00

BS ISO 11023 : 1999 - Liquorice extracts (Glycyrrhiza glabra L.) - Determination of
glycyrrhizic acid content - Method using high-performance liquid chromatography          £ 32.00

BS ISO 11357:- Plastics - Differential scanning calorimetry (DSC)

BS ISO 11357-5 : 1999 - Determination of characteristic reaction-curve temperatures and
times, enthalpy of reaction and degree of conversion                                                                £ 45.00

BS ISO 11900 :- Tools for pressing - Ball-lock punch retainers

BS ISO 11900-2 : 2001 - Type C and D, reduced for light duty                                             £ 45.00

BS ISO 12656 : 2001 - Micrographics - Use of bar codes on aperture cards                                 £ 32.00

BS ISO 14368:- Mineral and sapphire watch-glasses

BS ISO 14368-1 : 2000 - Dimensions and tolerances                                                              £ 32.00

BS ISO 14532 : 2001 - Natural gas - Vocabulary                                                                 £ 101.00

BS ISO 14535 : 2001 - Photography - Room-light loading packages for elecronic
scanners and image setting film and paper rolls - Dimensions and related requirements £ 45.00

BS ISO 14714 : 1998 - Essential oils and aromatic extracts - Determination of residual
benzene content                                                       £ 32.00

BS ISO 18115 : 2001 - Surface chemical analysis - Vocabulary                                         £ 90.00

BS ISO 80416 :- Basic principles for graphical symbols for use on equipment

BS ISO 80416-2 : 2001 - Form and use of arrows                                                          £ 32.00

PUBLISHED DOCUMENTS

DD IEC PAS 62255:- Multi-pair cables used in high bit rate digital access
telecommunication networks

DD IEC PAS 62255-1 : 2001 - Outdoor cables                                                          £ 18.00

PD ES 59011 : 2001 - Specification for the representation of quality rules and metrics for
hardware and software design languages                                                         £ 45.00

DIN Standards

Building and construction materials

DIN EN 933-10 : 2001 - Tests for geometrical properties of aggregates Part 10 :
Assessment of fines - Grading of fillers (air jet sieving)                                             DM 108.16

DIN EN 1367-3 : 2001 - Tests for thermal and weathering properties of aggregates
Part 3: Bolling test for "Sonnenbrand basalt"                                                   DM 120.87

DIN EN 1931 : 2001 - Bitumen, plastic and rubber sheets for roof waterproofing
determination of water vapour transmission properties

Supersedes parts of DIN 16726 : 1986 Ed.                                                                DM 120.87

DIN EN 12320 : 2001 - Building hardware Padlocks and padlock fittings
Requirements and test methods                   DM 161.94

DIN EN 12354-4 : 2001 - Building acoustics Estimation of acoustic performance of
buildings from the performance of elements Part 4: Transmission of indoor
sound to the outside                                        DM 174.46

DIN EN 12390-2 : 2001 - Testing hardened concrete Part 2: Making and curing
specimens for strength tests          DM 108.16

DIN EN 12629-4 : 2001 - Machines for the manufacture of constructional products
from concrete and calcium-silicate - Safety Part 4: Concrete roof tile
making machines   DM 133.97

DIN EN 12691 : 2001 - Flexible sheets for waterproofing Bitumen, plastic and rubber
sheets for roof waterproofing Determination of resistance to impact                     DM 108.16

DIN EN 12730 : 2001 - Flexible sheets for waterproofing Bitumen, plastic and rubber
sheets for roof waterproofing - Determination of resistance to static loading  

Supersedes parts of DIN 16726 : 1986 Ed.                                            DM 108.16

DIN EN ISO 10211-2 : 2001 - Thermal bridges in building construction - Calculation of
heat flows and surface emperatures Part 2: Linear thermal bridges

Supersedes parts of DIN 4108-5 : 1981 Ed.                                              DM 148.64

DIN EN ISO 13793 : 2001 - Thermal performance of buildings - Thermal design of
foundations to avoid frost heave                                          DM 213.77

Convection Heaters

DIN EN 613 : 2001 - Independent gas-fired convection heaters       DM 357.72

DIN EN ISO 7590 : 2001 - Steel cord conveyor belts - Methods for the determination
of total thickness and cover thickness                                    DM 108.16

Environment and Health Protection Safety

DIN 38405-32 : 2000 - German standard methods for the examination of water waste
water and sludge Anions (group D) - Determination of antimony by atomic
absorption spectrometry (D 32)                          DM 148.64

DIN 38405 : 2001 - German standard methods for the examination of water, waste
water and sludge Anions (group D); Determination of iodide by photometry (D 33)  DM 108.16

DIN 38406-32 : 2000 - German standard methods for the examination of water,
waste water and sludge Cations (group E); Determination of iron by atomic
absorption spectrometry (AAS)(E 32)                                DM 120.87

DIN 38406-33 : 2000 - German standard methods for the examination of water, waste
water and sludge Cations (group E); Determination of manganese by atomic
absorption spectrometry (E 33)                 DM 120.87

DIN EN 12094-5 : 2001 - Fixed firefighting systems - Components for gas
extinguishing systems Part 5: Requirements and test methods for high and low
pressure selector valves and their actuators for CO2 systems         DM 133.97

DIN EN 12094-6 : 2001 - Fixed firefighting systems - Components for gas
extinguishing systems Part 6: Requirements and test methods for non-electrical
disable devices for CO2 systems                            DM 108.16

DIN EN 12094-7 : 2001 - Fixed firefighting systems - Components for gas
extinguishing systems Part 7: Requirements and test methods for nozzles
for CO2 systems                              DM 148.64

DIN EN 12094-13 : 2001 - Fixed firefighting systems - Components for gas
extinguishing systems - Part 13 : Requirements and test methods for check
valves and non-return valves                       DM 148.64

DIN EN 12816 : 2001 - Transportable refillable steel and aluminium LPG
cylinders Disposal                        DM 94.08

DIN EN 13211 : 2001 - Air quality - Stationary source emissions Manual method
of determination of the concentration of total mercury                                              DM 188.54

DIN EN ISO 9241-6 : 2001 - Ergonomic requirements for office work with visual
display terminals (VDTs) Part 6: Guidance on the work environment                               DM 227.27

DIN EN ISO 9377-2 : 2001 - Water quality - Determination of hydrocarbon oil index
Part 2: Method using solvent extraction and gas chromatography                                   DM 148.64

DIN EN ISO 10882-1 : 2001 - Sampling of airborne particles and gases in the
operator's breathing zone Part 1: Sampling of airborne particles

This standard together with DIN EN ISO 10882-2 : 2001
supersedes DIN 32507 : 1984 Ed.,            DM 188.54

DIN EN ISO 10882-2 : 2001 - Sampling of airborne particles and gases in the
operator's breathing zone Part 2: Sampling of gas 

This standard, together with DIN EN ISO 10882-1 : 2001,
supersedes DIN 32507 : 1984 Ed.,            DM 148.64

DIN EN ISO 11399 : 2001 - Ergonomics of the thermal environment Principles
and application of relevant International Standards                                                     DM 188.54

Fluid Systems and Components for General Use

DIN EN 12334 : 2001 - Industrial valves Cast iron check valves                                    DM 120.87

DIN EN 12560-1 : 2001 - Flanges and their joints Gaskets for class-designated
flanges Part 1: Non-metallic flat gaskets with or without inserts        DM 161.94

DIN EN 12560-2 : 2001 - Flanges and their joints Gaskets for class-designated flanges
Part 2: Spiral wound gaskets for use with steel flanges                                                    DM 161.94

DIN EN 12560-3 : 2001 - Flanges and their joints Gaskets for class-designated
flanges Part 3 : Non-metallic PTFE envelope gaskets                                                DM 120.87

DIN EN 12560-4 : 2001 - Flanges and their joints Part 4 : Corrugated flat or gooved
metallic and fillet metallic gaskets for use with steel flanges                                                 DM 133.97

DIN EN 12560-5 : 2001 - Flanges and their joints Gaskets for class-designated
flanges Part 5: Metallic ring-joint gaskets for use with steel flanges                      DM 133.97

DIN EN ISO 5211 : 2001 - Industrial valves Part-turn actuator attachments 

Supersedes DIN 3337 : 1985 and DIN ISO 5211-1 and DIN ISO 5211-2 : 1982 Ed.             DM 161.94

DIN EN ISO 11114-2 : 2001 - Compatibility of cylinder and valve materials with gas
contents Part 2 : Non-metallic materials               DM 161.94

Glass and Ceramics Industry

DIN EN 725-12 : 2001 - Advanced technical ceramics Methods of test of ceramic
powders Part 12: Chemical analysis of zirconia                                             DM 148.64

Heat-Treatable Steels

DIN EN 10085 : 2001 - Nitriding steels - Technical delivery conditions   

Supersedes DIN 17211 : 1987 Ed.  DM 188.54

Internal Combustion Engines

DIN EN 12601 : 2001 - Reciprocating internal combustion engine driven generating
sets Sefety         DM 161.94

Manufacturing Engineering

DIN EN 12415 : 2001 - Safety of machine tools Small numerically controlled turning
machines and turning centres          DM 213.77

DIN EN 12478 : 2001 - Safety of machine tools Large numerically controlled turning
machines and turning centres          DM 213.77

DIN EN 12840 : 2001 - Safety of machine tools Manually controlled turning
machines with or without automatic control              DM 213.77

DIN EN ISO 8502-9 : 2001 - Preparation of steel substrates before application of
paints and related products Tests for the assessment of surface cleanliness
Part 9: Field method for the conductometric determination of water soluble salts      DM 120.87

Mathematics, Natural Sciences

DIN EN 13311-1 : 2001 - Biotechnology - Performance criteria for vessels
Part 1: General performance criteria      DM 148.64

DIN EN 13311-2 : 2001 - Biotechnology - Performance criteria for vessels
Part 2: Pressure protection devices       DM 120.87

DIN EN 13311-3 : 2001 - Biotechnology - Performance criteria for vessels
Part 3: Glass pressure vessels                    DM 133.97

DIN EN 13311-4 : 2001 - Biotechnology - Performance criteria for vessels
Part 4: Bioreactors         DM 133.97

DIN EN 13311-5 : 2001 - Biotechnology - Performance criteria for vessels Part 5:
Kill tanks                                                 DM 133.97

DIN EN 13311-6 : 2001 - Biotechnology - Performance criteria for vessels Part 6:
Chromatography columns                  DM 120.87

Mechanical Systems and Components for General Use

DIN 267-30 : 2001 - Technical delivery conditions for fasteners Part 30: Metric thread